Sgs305fs Parts

The Screw Range is an OEM component specifically designed for Bosch ranges. These screws serve to securely mount and assemble different components within the oven cavity. 

The screw range plays a crucial role in ensuring internal structures and assemblies are firmly fastened in their correct positions. Proper installation with this screw set guarantees tight tolerances and optimal heat distribution throughout the cooking and baking cycles.

Causes of faulty screws can include wear and tear over time resulting in loosened fits, cracks or heads shearing off due to repeated heating and cooling. 

Symptoms of loose or damaged screws include:

• Drooping or sagging racks and shelves  
• Components shifting positions or coming loose
• Inconsistent or uneven cooking results

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models. Replace yours today to maintain your range's integrity.
 

The Spark Switch is an OEM part for Bosch ranges. This part ignites the burners by sending a signal to the spark module, which then produces the spark needed to ignite the gas.  

Causes of a bad spark switch can include wear and tear from regular use, damage from spills or cleaning agents, or electrical issues.  

Symptoms of a bad spark switch include:

• Burners not igniting
  Continuous clicking even after the knob is turned off
  No spark when attempting to ignite the burner
  The cooktop not producing a flame

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Ignition Device is an OEM part for Bosch gas cooktops. This ignitor is responsible for sparking the burners to safely ignite the gas flow and initiate the cooking process.

The ignition device works through a high-voltage electrical arc that produces a spark near each gas burner valve whenever a cooktop burner is turned on. This spark reliably ignites the gas, allowing full and consistent burner flame.

Causes of a bad ignition device can include defects in the electronic components, wear and tear of the electrode tips over time, or issues preventing a strong enough spark from occurring.

Symptoms of a bad ignition device include:

• Burners that will not light or remain lit
• Repeated lighting attempts required before a flame is produced
• Inconsistent or intermittent ignition between burners
• Burners that light but then extinguish unexpectedly

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Cooktop Bracket Kit is an OEM part for Bosch cooktops. This bracket and hardware kit serves to securely fasten the cooktop surface to the underlying countertop.

Causes of a bad bracket can include wear and deformation from heavy cooktop use over time, or damage to fastening screws from accidental impacts.

Symptoms of a bad bracket and fastening kit include:

• The cooktop surface becoming loose, wobbly, or unstable during use
• Gaps appearing between the cooktop and countertop edges
• Reduced heat containment and risk of burns from loose surfaces

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This grate foot assembly installs on the underside of a gas cooktop or range grate to cushion and stabilize it. Replacing worn or missing feet helps protect the surface and keeps cookware level while you cook.

• Cushions contact between the grate and cooktop surface
• Helps keep the grate from sliding and reduces rattling
• Maintains proper grate height for stable, level cookware
• Common symptoms: wobbling/rocking grate, missing or hardened feet, scratches on the surface

• Allow the cooktop and grates to cool completely before servicing
• Remove the grate, pull off the old foot, and clean the mounting area
• Press the new foot firmly into place; if your model uses an adhesive or retainer, follow the manufacturer's cure time before using the burners
• For best results, replace all feet on a grate at the same time and it sits flat

This small replacement sealing ring restores a watertight connection in the appliance's fluid or valve fittings, helping prevent leaks and maintain proper operation. Replace worn or damaged rings to stop drips and avoid water-related damage. What it does:

• Forms a seal at pump, valve or hose connections to prevent water leakage.
• Commonly replaced when the ring becomes cracked, brittle, flattened or deformed.
• Symptoms that indicate replacement: visible leaks, pooling under the appliance, or intermittent water flow issues.
• Protects internal components by maintaining a reliable seal and preventing water intrusion.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect mating surfaces and clean away debris or old sealant before installing the new ring.
• Fit the ring evenly without twisting; avoid overstretching or using metal tools that can nick the ring.
• If the original used lubricant, use only manufacturer-recommended lubricants; otherwise install dry.

This small protective end cap seals and shields an exposed component to prevent debris, moisture, and accidental contact. It restores a finished appearance and helps maintain safe appliance operation. What it does:

• Covers and protects exposed shafts, studs, or terminals from dirt and moisture
• Prevents accidental contact with electrical or moving parts
• Helps maintain proper alignment and a finished look on the appliance panel or assembly
• Use when the original cap is missing, cracked, or worn

• One replacement cap

• Disconnect power to the appliance before servicing to avoid shock or injury
• Typically installs with a simple push-fit; ensure the mating surface is clean and undamaged
• Verify correct orientation and secure seating; replace if it does not fit snugly

This replacement lens covers and diffuses an appliance indicator or lamp, protecting it from moisture and impacts while restoring a clean, finished look. Replace a damaged or missing lens to ensure safe, clear illumination.

• Covers and protects the lamp/indicator from splashes, debris, and impacts
• Diffuses light for clear, even illumination
• Helps reduce moisture intrusion around the light opening
• Typical failure signs: lens cracked, melted, cloudy/yellowed, warped, or missing

• Disconnect power to the appliance and allow any bulbs to cool before starting
• Access the light housing; release tabs or remove screws as applicable
• Seat the new lens evenly; avoid overtightening to prevent cracking
• Restore power and verify the light/indicator is visible through the lens

This push-on retainer clip holds a 6mm shaft securely in place on compatible appliance components, restoring proper axial restraint and preventing parts from sliding off during operation. Simple, low-profile fastening for shaft retainment. What it does:

• Secures shafts and spindles with a 6mm outer diameter to prevent axial movement
• Keeps knobs, pulleys, or rotating components positioned correctly during use
• Commonly used where a quick, tool-free clip is required for retention
• Can resolve symptoms like loose or detached knobs, wobbling pulleys, or parts sliding along the shaft

• One push-on retainer clip sized for 6mm shaft mounting

• Push the clip onto the shaft groove until it snaps into place; ensure full engagement before operating
• Use snap-ring pliers or appropriate tools if removal is required to avoid damage
• Wear eye protection when installing or removing clips to guard against sudden release

The Pressure Regulator is an OEM replacement part for Bosch gas cooktops. It maintains consistent burner flame levels for precise meal preparation, maximizing fuel efficiency. Even pressure safeguards safety through controlled gas flow.

Causes of a bad pressure regulator can include deteriorating diaphragm seals or valve shafts due to repetitive operations over the appliance's lifespan. Mineral scales from sediment in gas lines threaten integrity.

Symptoms of a bad pressure regulator include:

• Flames lift or flare away from burner heads unpredictably   
• Burners cannot maintain set heat levels, constantly cycling 
• Difficulty achieving desired flame height or cooktop shuts off
• Potential safety hazards like uncontrolled gas leakage

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement holder is the mounting bracket used to secure a component inside the appliance, restoring proper alignment and support so parts stay in place during normal use. It helps reduce noise and wear caused by loose or misaligned components. What it does:

• Provides a secure mounting point for the associated component to prevent movement and vibration
• Restores proper spacing and alignment so connected parts operate smoothly
• Helps eliminate rattling or knocking caused by a missing or damaged bracket
• Durable replacement designed to match the OEM fit and function

• One holder as pictured

• Compare the part to the original before installation to ensure fit and orientation
• Turn off power and unplug the appliance before beginning any repair
• Use basic hand tools; avoid overtightening fasteners to prevent damage

This burner cap sits on top of a gas cooktop's burner head to protect the burner, shape the flame, and promote even heating across cookware. It restores proper flame pattern and appearance for a tidy, functional cooktop. What it does:

• Covers the burner head to focus and stabilize the gas flame for more even heat distribution
• Helps prevent food and spills from entering the burner ports
• Can reduce irregular or distorted flame patterns caused by a damaged or missing cap
• Restores the proper fit and finish of the cooktop surface

• Turn off the cooktop and allow the burner to fully cool before handling
• No tools typically required—remove the old cap and set the new cap onto the burner head, aligning it so it sits flat and centered
• If the cap does not seat properly, check for debris or warped parts and clean or inspect before use
• If you smell gas, shut off the supply.

This holder is a small mounting bracket designed to secure internal components in place inside the appliance, helping prevent movement and vibration for reliable operation. It's a direct-replacement component that restores proper fit and stability. What it does:

• Secures and supports designated internal parts to maintain correct alignment
• Reduces rattling or movement that can occur when fasteners or supports fail
• Keeps wiring, tubes, or assemblies positioned to prevent wear or interference
• Restores original mounting points to allow reassembly after repair

• One holder (mounting bracket) as shown

• Disconnect power (and water if applicable) before beginning any repair
• Inspect surrounding fasteners and clips; replace any that are damaged
• Use the OEM fasteners and align the holder to original mounting points