Tb146ec Parts

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

• Dimming or flickering light
• Complete lack of illumination inside the appliance
• Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Supplies electrical power from wall outlet to refrigerator. Replace this cord if cut, frayed, overheated, or damaged to restore safe electrical connection.

Secures refrigerator wiring to prevent chafing and vibration noise. Replace when damaged or missing to keep harnesses organized. Confirm fit by model.

Size: 10-16 ab.

Size: 8-32 t. Includes 12 screws.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

This air filter is the replacement part for specific tillers, edgers, and cultivators. Its main function is to prevent grime and debris from reaching the engine and carburetor. With time and use, air filters get dirty and may become clogged or damaged. Replacing the air filter regularly encourages adequate air flow to the engine, which reduces engine wear, and increases the longevity of the machine. Replacement is simple and can be done in a matter of minutes. With a screwdriver, remove the old air filter, and install this new, clean filter. Be sure to check the owners manual for proper installation techniques, as it varies by brand and machine. This air filter, made of foam, is a genuine OEM part. It is sold as an individual unit. It is compatible with tillers, edgers and cultivators made by the Ryobi, Troy-Bilt, and Yardman brands. All engines need regular care and maintenance to perform optimally. To ensure the Tiller, Edger, or Cultivator model starts easily, maintains power, functions properly, and has a long, hard-working life, the air filter should be replaced routinely.

This genuine OEM replacement part is a push cap designed for snowblower, tiller, and edger wheel assemblies. A push cap is a special type of nut, or fastener, that helps to hold unthreaded shafts in place. Although small, this push cap helps to secure the wheel to the axle. Push caps are most commonly damaged if the operator uses their appliance in rough terrain. If damaged, it can fall off, causing the wheel to also fall off. Replacing push caps is an easy repair as they attach to the outside of the wheel assembly. The only hardware required to make this repair is a nut driver. If you do not have a nut driver, a pair of pliers can also be used to attach the new push cap. This part is a high-quality replacement part meant for Yard Man, Husky, Ryobi, Yard Machines, Troy-Bilt, MTD, Bolens, and Cub Cadet appliances. It is sourced direct from its original manufacturer and ships individually.

Replace a broken recoil spring when your gas trimmer, edger, or blower won't pull-start or the cord won't retract. Simple DIY repair in under 30 minutes.

Fastening nut for tillers, trimmers, blowers, and edgers. Secures components by working with bolts. Replace if stripped, corroded, or missing.

This is a replacement carburetor and primer that is for use with several types of gas-powered lawn and garden equipment. It mixes air and fuel before sending it into the engine. This ensures that there is a proper mix, so the machine can start up correctly. If there is an issue with the carburetor, it will often mean that the machine feels as if it is not getting enough power. In some cases, the machine might not start at all.Over time, the carburetor might need to be replaced. The primer could start to wear out and crack, as could the throttle line. The metal of the carburetor might start to wear down eventually, as well. If there are issues, they will need to be replaced. Replacing the carburetor is easy and will only take a screwdriver. Owners should be sure to repair the machine in a well-ventilated area.The replacement carburetor and primer works with a range of tillers and trimmers from MTD, Troy-Bilt, and Cub Cadet. It comes with a carburetor, rubber primer bulb, and throttle cable. This is an OEM part that has been sourced from the manufacturer.

Flywheel assembly for tillers and outdoor power equipment. Replaces cracked, damaged, or worn flywheels that affect engine timing and cooling fan operation.

Replacement fuel cap for lawn tractors, trimmers, blowers, and tillers. Prevents fuel leaks and evaporation. Replace if cracked, broken, or missing.

Secures the lower handle clip on line trimmers and lawn equipment. Replace if broken, stripped, or missing to properly mount the handle assembly.

This is the clutch drum that houses the clutch that engages the power tools on more than 50 gasoline-powered lawn and landscape devices. The clutch sits inside this housing, which enables it to rotate. When the RPMs of the engine reach a certain point, the clutch expands and causes the drive shaft of the tool to engage. Among the different kinds of equipment that use this clutch housing are cultivators, edgers, and grass trimmers. The clutch, and therefore the clutch drum, receive a great deal of wear for several reasons: the vibration of the engine, the rapid up and down change of engine revolutions, and resistance met by the tools that are transferred back to the clutch and housing. Signs that the clutch is failing include a slow response to increased engine RPMs and an inability for the power tool to engage the drive shaft. In these cases, the clutch and housing should be replaced in order for the equipment to operate properly again. When choosing a clutch housing, it is important to select one that, like this one, is a genuine OEM certified part. This housing is compatible with Craftsman, Troy-Bilt, MTD, Bolens, Yard-Man, and Ryobi equipment.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.