Wta3510us Parts

The Latch is an OEM part for Bosch dryers. This latch ensures that the dryer door remains securely closed during operation, preventing the door from opening unexpectedly and allowing the dryer to function efficiently.

Causes of a bad dryer latch can include wear and tear from frequent use, physical damage from forceful closing or impacts, and deformation due to prolonged exposure to high temperatures.

Symptoms of a bad latch include:

• The dryer door not staying closed
• The dryer not starting or stopping mid-cycle
• Difficulty in opening or closing the dryer door
• The door popping open during operation

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Thermister

The Blower Belt is an OEM part for Bosch dryers. This belt efficiently transmits rotation from the motor to the blower fan, circulating heated air through the dryer drum.

Causes of a bad blower belt can include drying and cracking from heat exposure over many cycles.

Symptoms of a bad blower belt include:

• The blower fan not spinning or rotating slower than usual
• Longer dry times or an inability to fully dry clothes
• An intermittent squealing or squeaking noise from the belt

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This Vent Adapter is an OEM part for Bosch Dryers. It plays a role in connecting the dryer exhaust to the vent hose, ensuring efficient airflow and proper ventilation. Over time, wear and tear or improper installation can lead to issues with this component.

What Causes a Bad Vent Adapter: 
Continuous use or improper fitting can cause the vent adapter to degrade or become loose. Exposure to heat and moisture from the dryer can also contribute to its deterioration.

Symptoms of a Bad Vent Adapter:

• Poor dryer performance
• Difficulty in connecting the vent hose
• Air leaks around the vent connection

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement drum belt wraps around the dryer drum and motor pulley to rotate the drum for normal drying. Replaces worn or broken belts to restore tumbling and help your dryer move loads evenly. What it does:

• Transfers motor power to the drum so clothing tumbles during the drying cycle
• Commonly used when the drum slips, won't turn, or makes a rubbing/squealing noise
• Helps maintain proper drum alignment and smooth rotation when in good condition

• Disconnect power before any service; follow the dryer's service manual for safe access
• Inspect idler pulley and motor shaft for wear when replacing the belt
• Re-tension and route the belt per the OEM diagram to avoid mis-tracking

A 15 amp cartridge fuse that protects appliance electrical circuits from overcurrent, helping prevent damage to controls and components. Fits into inline fuse holders or boards where that specific fuse rating is required. What it does

• Interrupts circuit power when current exceeds 15 amps to protect wiring and electronics
• Commonly linked to symptoms like no power to controls, unresponsive display, or appliances that won't start
• Designed to be replaced when visibly blown or when continuity test fails
• Works as the exact rated safety fuse specified for compatible appliances

• One 15 amp cartridge fuse

• Disconnect all power to the appliance before accessing or replacing the fuse
• Replace with the identical fuse type and 15 amp rating only; do not substitute different ratings
• Handle carefully and mount fully seated in its holder or on the PCB as designed
• If the new fuse fails again immediately, stop — repeated failures indicate underlying electrical faults

This part is a drive pulley with bearings, also known as a dryer roller. The purpose of this component is to allow the dryer to tumble properly by providing support to the drum cylinder. The drive pulley provides the tension needed.When the drive pulley begins to go bad, the unit may begin making loud noises while running. This could include squeaking, thumping, or squealing noises. Be sure to unplug the dryer before attempting to work on this part.This part is sold individually and comes straight from the manufacturer. This particular drive pulley with bearings is compatible with dryer units that are manufactured by Bosch. This could include brands such as Thermador and Gaggenau in addition to Bosch.

This door gasket is the flexible rubber seal that fits the dishwasher door to keep water inside the tub during cycles. Replacing a worn gasket restores a watertight seal and helps stop leaks and moisture buildup. What it does:

• Seals the gap between the door and tub to prevent water leaks during wash cycles
• Keeps spray and suds inside the dishwasher, protecting surrounding flooring and cabinetry
• Helps reduce odors and mold growth by maintaining a tight seal that limits moisture escape
• Common symptom: water pooling or dripping from the bottom/side of the door
• Common symptom: visible cracks, tears, flattening, or hardened areas in the gasket

• One door gasket

• Inspect the door channel and mating surfaces; clean away residue before installing the new gasket
• Press the gasket evenly into the door channel, working from one end to the other to avoid twisting
• Turn off power and water to the appliance before working on the door; refer to the service manual for model-specific instructions

This bearing set replaces worn drum bearings to restore smooth, quiet rotation and help prevent further damage to the tub assembly. Fits select Bosch WTA/WTL laundry machines. What it does

• Supports the drum/tub shaft so the drum turns smoothly and quietly.
• Worn bearings can cause loud squealing, grinding, or metal-on-metal noise.
• Excessive vibration or a wobbling drum during spin are common signs of bearing failure.
• Replacing the bearing set helps prevent additional wear to the drum and shaft.

• Disconnect power and water before beginning any repair.
• Access requires drum/tub disassembly; keep track of fasteners and seals.
• Bearings are typically press-fit; removal and installation may require a bearing puller/press or specialized tools.

This high-limit thermostat is the overheat safety switch for the heating circuit. It opens when excessive temperature is detected to cut power to the heater, protecting the appliance and restoring normal heating when replaced.

• Monitors temperature at the heater and opens the circuit if it overheats
• Helps prevent damage from excessive heat and potential safety hazards
• A failed-open thermostat may cause no heat, poor drying, or unusually long cycles
• Frequent tripping may point to underlying circulation or control issues that should be checked

• Disconnect power at the breaker or unplug the appliance; allow it to cool completely before service
• Access location per model; typically mounted on or near the heater or heater housing
• Note wire positions and transfer leads one at a time; secure using existing mounting hardware
• After installation, run a test cycle to confirm proper heating

Color: white. Measures about 10-1/2 inches wide by 13-1/2 inches deep.

This high-temperature 220V, 15-watt oven light bulb restores bright interior lighting so you can monitor cooking progress without opening the door. It's built for sustained heat and replaces a burned-out or flickering lamp.

• Illuminates the oven cavity during baking, broiling, and cleaning cycles
• High-temperature design for continuous heat exposure
• Common failure symptoms: no light when switched on, dim or intermittent illumination, blackened glass, or a broken filament

• Disconnect power at the breaker and allow the oven to cool completely
• Remove the light lens/cover; unthread and remove the old bulb
• Thread in the new bulb of the same voltage and wattage; do not overtighten
• Reinstall the cover, restore power, and test the light

This thermostat with attached sensing cable detects and regulates appliance temperature to help maintain proper heating cycles and protect against overheating. It replaces a failed temperature control component so your appliance can heat correctly and safely. What it does:

• Senses internal temperature and sends a signal to the control to start or stop heating
• Helps prevent overheating by providing accurate temperature feedback
• Works as the temperature-sensing element used by the appliance control board

• Disconnect power before servicing to avoid electric shock
• Handle the sensing cable and probe gently; do not kink or pinch the capillary/sensor
• Verify proper routing and secure mounting of the sensor per the appliance's service instructions

A sealing kit designed to replace worn seals in the dishwasher pump area to stop leaks and restore a watertight pump assembly. Ideal when seals fail and allow water to escape around the pump. What it does:

• Replaces worn or damaged pump seals to help stop leaks beneath the machine
• Restores the pump assembly's watertight seal for proper water circulation and drainage
• Helps prevent water damage to the cabinet and flooring caused by seal failure
• Commonly used when you find water under the dishwasher, visible leaks near the pump, or damp cabinet flooring

• One sealing kit

• Disconnect power and shut off the water supply before starting any repair
• Access usually requires removing the lower access panel and may require partial pump disassembly
• Keep track of small seals and O-rings during removal; inspect related parts for wear

This door latch mechanism secures the appliance door and completes the door-switch circuit so the unit can operate. It replaces a worn or damaged latch to restore proper door closure and reliable operation. What it does:

• Engages and holds the door closed during cycles so the appliance can run.
• Activates the door switch/contact that signals the control board the door is closed.
• Commonly used when the door won't stay closed, the appliance won't start, or the latch feels loose or broken.
• Fits into the door frame and mates with the striker/handle to keep the seal tight.

• One door latch mechanism

• Disconnect power (unplug or switch off breaker) before servicing to avoid electrical shock.
• Access usually requires opening the door panel or removing the inner door; keep track of screws and clips.
• Handle carefully to avoid damaging the latch tabs or wiring; test door operation before reassembling fully.
• If wiring or mounting points are damaged, replace those parts as needed rather than forcing the latch.