Sears Canada Washer Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002263
The Dryer Light Bulb is an OEM part for Whirlpool dryers. This bulb is specifically designed to provide illumination inside the dryer drum, allowing for better visibility when loading and unloading laundry. It ensures a well-lit drying environment.
Causes of a bad dryer light bulb can include normal wear and tear, electrical issues, or accidental breakage.
Symptoms of a bad dryer light bulb may include:
- The bulb not turning on when the dryer door is open.
- Dim or flickering light inside the dryer drum.
- A burnt-out or broken bulb.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Squeaky noise and not fully drying David H. • Santa Clarita , CA • September 20, 2019
Originally the dryer was squeaking a lot, so I purchased a new belt tensioner, but the original tensioner was an old-style no wheel tensioner, so that wasn't the source of the squeaking.
I saw a lot of lint had built up inside the unit where there shouldn't have been that much. So I viewed a few videos on the Appliance Pros site and saw that the rear wheel guides were the cause of the squeaking and the rear felt drum and blower housing seal needed to be replaced. The rear blower housing was...
Read more
More
$15.55
- Compare At:
-
$18.50
- You Save:
-
$2.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10446781
The Idler Arm Spring is an OEM part for Whirlpool dryers, maintains tension in the dryer's belt system. This spring is crucial for the proper operation of the dryer, as it helps to keep the belt tight around the drum and motor pulley, enabling the drum to rotate smoothly during cycles.
Causes of a bad Idler Arm Spring can include stretching or weakening over time due to constant tension, or breakage from wear and tear.
Symptoms of a bad Idler Arm Spring include:
- Unusual noises, such as squeaking or squealing
- The dryer drum may not rotate smoothly or may stop turning altogether
- Clothes take longer to dry, or you may notice uneven drying
- The dryer might not start if the belt is disengaged due to insufficient tension.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The drum belt or the tension pulley was maki a squealing noise when drying the clothes Harold W. • Albany , GA • July 06, 2015
Replace the drum drive belt and tension pulley assy.
Read more
More
$21.95
- Compare At:
-
$26.34
- You Save:
-
$4.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3389441
The Female Dryer Door Catch is an OEM part for Whirlpool dryers. It secures the dryer door in the closed position during operation, ensuring that the door remains firmly shut while the dryer is running. This catch works with the male door strike to provide a reliable latching mechanism.
Common causes of a bad door catch include repeated use leading to wear and tear, physical damage, or misalignment. A faulty door catch can prevent the dryer from operating correctly and may pose a safety hazard.
Symptoms of a bad female dryer door catch include:
- The dryer door not staying closed
- The dryer not starting due to the door not latching properly
- Difficulty in opening or closing the dryer door
- Visible damage to the door catch
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer door would not stay closed without being taped shut Marceen W. • La Canada , CA • June 10, 2016
I chatted with a rep on Appliance Parts Pros and found out which parts I needed for my model of dryer. Ordered the 2 clips that held the door closed. They arrived the next day!! My dryer was very different than the video but we were able to figure out which screws to remove. The old clips popped out and the new ones popped in. Took about 30 minutes because of there being a top and bottom clip to remove and replace and line up the door parts to screw the screws back in. It works great!! I...
Read more
More
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 279318
Includes screws and wire connectors. For the complete terminal block kit use 279320.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Loose wire in back caused a short and burned out plug insulator etc William W. • Pottsboro , TX • February 15, 2019
I ordered the parts through AppliancePartsPros.com. They were delivered the next day. I installed them and the dryer works great.
Read more
More
$52.31
- Compare At:
-
$62.25
- You Save:
-
$9.94
Genuine Whirlpool part
By: Whirlpool
Part Number: 8541503
Includes 2 adhesive pads, 2 brackets, 4 screws, and installation instructions.
Do-It-Yourself Stories from Customers like You
I needed a stack kit for an older whirlpool duet pair Dedra R. • Wichita , KS • March 08, 2016
I ordered a stack kit according to the model numbers on the washer and dryer and the kit worked perfectly. My washer and dryer are now stacked and I am extremely satisfied with how easy it was to order from this website and the quick delivery of my part. Thank you!
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Whirlpool part
By: Whirlpool
Part Number: W11613302
This heat-resistant fiberglass oven door gasket seals the oven cavity perimeter, helping keep heat inside for consistent temperatures and efficient cooking. Replace a worn, frayed, or flattened seal to restore proper door sealing performance. What it does
- Forms a heat-resistant seal around the oven opening to minimize heat loss
- Helps maintain set temperature and overall cooking performance
- Can help address long preheat times, uneven baking, and hot air leaking around the door
- Replace if the gasket is frayed, brittle, compressed, or falling out of its channel
What's included
- Includes: 1 fiberglass door gasket
Install notes
- Disconnect power and allow the oven to cool completely before service
- Remove the old gasket from its mounting slots or clips; clean the channel of debris
- Install the new gasket without stretching; seat it evenly around the perimeter with ends routed as originally positioned
- Close the door and check for uniform contact all around; adjust seating if needed
More
$35.57
- Compare At:
-
$42.33
- You Save:
-
$6.76
Genuine Whirlpool part
By: Whirlpool
Part Number: WP16123
Size: 1-1/16 x 5/8 inch. Used for fill hose. For a 4 pack order 285448A
Do-It-Yourself Stories from Customers like You
Water inlet valve was corroded and broken washer Sandra H. • Belton , MO • June 26, 2015
Replaced with new part ordered from store
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10476828
This part is a moisture sensor control board that is used on dryer units. This component monitors the moisture levels within the dryer and adjusts the dry time during the automatic drying cycle. A new moisture sensor control board will be needed if the time is not advancing in the automatic drying cycle, even if it does advance in the timed dry cycle. Another sign is if the dryer continues to run after the clothing inside is dry. Unplug the dryer from its power source prior to replacing this component. The person performing this task may wish to wear work gloves to protect their hands.The moisture sensor control board is compatible with dryers that are manufactured by Kenmore, KitchenAid, Kenmore Elite, Whirlpool, Amana, Crosley, Maytag, Inglis, Sears Canada, Roper, and Sears. This part is sold individually and it is a genuine OEM replacement part that comes straight from the manufacturer.
Do-It-Yourself Stories from Customers like You
Kenmore elite dryer routinely stopped after a few minutes when set on the moisture cycle but finished completely when set on timed cycle James L. • Brandywine , MD • December 06, 2014
Did some research via the internet and figured the problem was likely the moisture control board. Watched a video of the repair of a similar unit in order to locate the moisture control board. Used the chat feature with one of the Appliance Parts Pros to get a schematic of the dryer and advice about where to use the putty knife to release the springs for access to the board. Thanks to the lady I chatted with for expert advice. Once the actual task was started, the repair took 15 or 20...
Read more
More
$186.25
- Compare At:
-
$213.76
- You Save:
-
$27.51
Genuine Whirlpool part
By: Whirlpool
Part Number: 350938
Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.
Do-It-Yourself Stories from Customers like You
Dryer drum completely wore off all coating Larry W. • Ubly , MI • July 01, 2016
Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do
Read more
More
$46.95
- Compare At:
-
$55.87
- You Save:
-
$8.92