Sears Range / Cooktop / Oven Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036
The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.
Symptoms of a failing Washer Door Switch include:
- The washer not starting or stopping unexpectedly during a cycle
- Error codes related to door closure issues displayed on the washer's control panel
- The washer door not locking properly or the lock mechanism not engaging
- The washer continuing to operate with the door open
Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.
This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
This part fixes the following symptoms
-
Will not drain
-
Pumps but will not spin
-
Timer will not advance
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016
The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new...
Read more
More
$20.95
- Compare At:
-
$32.43
- You Save:
-
$11.48
Genuine Whirlpool part
By: Whirlpool
Part Number: 279264
The Front Bearing and Seal Kit is an OEM replacement part for Whirlpool dryers. This kit includes the front bearing and seal for the dryer drum, which work together to provide smooth operation and prevent premature wear.
Causes of a bad front bearing and seal can include regular wear and tear from normal use, heavy loads that place extra strain on the bearings, or debris accumulation causing increased friction.
Symptoms of issues include:
- Noisy or grinding sounds coming from the drum area
- Vibration noticed during the operation
- Difficulty turning or rotating the dryer drum by hand
- Reduced efficiency and longer drying times
This OEM replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016
After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify...
Read more
More
$59.95
- Compare At:
-
$71.34
- You Save:
-
$11.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W11222083
This power cord connects your appliance to household electricity, supplying safe, reliable power to its controls and components. Replace a damaged or overheated cord to restore dependable operation and reduce the risk of shorts.
- Supplies AC power from the wall outlet to the appliance's electrical system
- Helps resolve no power, intermittent power loss, or tripped breaker issues
- Replace if the cord is cut, frayed, melted, discolored, or feels hot at the plug
- Restores safe operation when the original plug or insulation is damaged
What's included: 1 power cord Install notes:
- Disconnect power at the outlet or circuit breaker before servicing
- Note wire routing and connection points; match the original orientation for hot, neutral, and ground
- Seat the cord properly and secure with the model's required strain relief or clamp to prevent tension on terminals
- Ensure the cord is not pinched and is clear of sharp edges, hot surfaces, and moving parts; test for proper operation
Do-It-Yourself Stories from Customers like You
New cord Michael C. • Bakersfield , CA • May 10, 2021
Thanks to you, all went well. No problems.
Read more
More
$61.53
- Compare At:
-
$73.22
- You Save:
-
$11.69
Genuine Bosch part
By: Bosch
Part Number: 00671729
This control display board is the appliance's user-interface module that operates the front control panel and display, giving visible status and responding to user input. Replacing it fixes display and control issues safely and simply. What it does:
- Provides the visible display and interprets button/touch inputs so the appliance responds to selections.
- Can produce unresponsive or intermittent buttons/touch controls and erratic indicator lights.
- May trigger control errors or prevent cycle selection if damaged.
What's included: One control display board. Install notes:
- Disconnect all power before starting — turn off breaker or unplug the appliance.
- Handle the board carefully and avoid static discharge; use a grounding strap if available.
- Remove and reattach wire connectors and mounting hardware gently; note connector orientation.
- Reconnect power and verify functions before reassembling trim or covers.
More
$558.62
- Compare At:
-
$670.34
- You Save:
-
$111.72