Parts for Mtd 13A726JD299: Seat / Battery Parts

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

This insulator nut plate is a genuine MTD part, sold individually. This insulator nut plate can be used as a replacement part in a lawn mower. The purpose of the insulator nut plate in a lawn mower is to self-wrench into a bolt as a fastening component of several parts within the machinery of the appliance.The insulator nut plate can be easily lost or misplaced, or the component can become damaged and stripped over time from general wear and tear or as the result of an accident. The insulator nut plate is a small component and if it is found to be missing, it should be replaced by this genuine OEM replacement part. If the insulator nut plate is damaged, it should also be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This insulator nut plate is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This genuine MTD shoulder screw is an OEM replacement for use on select MTD machines and outdoor power equipment. The shoulder screw has several applications depending on the exact model of equipment, although it is often used to hold handles in place on push mowers. These screws can become worn or get lost over time, necessitating a replacement. It's important to always use genuine OEM parts when making a replacement on outdoor power equipment. This OEM shoulder screw is manufactured to exact standards by MTD and designed to work with several machines that are manufactured by the brand, along with select models from other outdoor power brands. It is sold as an individual unit, and those who need more than one will have to purchase additional quantities. This part can generally be replaced with minimal effort and won't usually require much disassembly. Gloves should be worn for safety whenever working on outdoor equipment, and it may be a good idea to disconnect the spark plug, as well.

This replacement part is a handle assembly. It is a genuine replacement part made by MTD. Handles are typically found in push lawnmowers and help the user control the speed and setting on the lawnmower. This part helps the user in turning and maneuvering the machine so that it operates properly. A new handle assembly might be needed if the current one is damaged or missing. This can include being dented, cracked, or chipped due to normal wear and tear. If the handle is not working the user might not be able to utilize all the functions of the machine and it should be replaced as soon as possible. Be sure to wear work gloves during this repair especially if the previous handle is damaged. This part is sold individually and is sourced directly from the manufacturer to ensure long-lasting use. This is also a genuine OEM replacement part.

The Hex Head Self-Tapping Screw is an OEM part for MTD outdoor power equipment. This screw is designed to securely fasten components of your equipment, providing reliable and durable connections. The thread size is 5/16 inches for major diameter, with 18 threads. The screw is 3/4 inches long and has a hexagonal or six-sided head. 

Over time, the Hex Head Self-Tapping Screw can become damaged due to corrosion, stripping of the threads, or wear from frequent tightening and loosening. This can compromise the integrity of the connections and potentially lead to equipment malfunction.

Symptoms of a bad Hex Head Self-Tapping Screw include:

• Loose or wobbly components
• Difficulty tightening or loosening the screw
• Visible damage or corrosion on the screw

This OEM replacement part is designed for use with various models of MTD outdoor power equipment.

This part is a replacement steering control handle grip. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, worn, or lost steering control handle grip in lawn tractors.The steering control handle grip provides the user with comfort and cushioning when controlling the lawn mower. The handle grip should be replaced if lost, worn, or broken. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this steering control handle grip, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This steering control handle grip can be used with different models of lawn mowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This is a self-tapping screw. It attaches to various lawn machines' engines. The exact location depends on the make and model of the device. With age or misuse of the lawn equipment, the self-tapping screw may become damaged or break. One sign that the screw is gone or broken is a loose connection between the engine and the foundation that it sets on. Excessive vibration is another indicator that the self-tapping screw is missing or damaged. If it does wear out and get lost or damaged, the part must be replaced.It is easy to replace a self-tapping screw. First, make sure that the device is cooled. Wear gloves for protection. It requires a wrench to install. If the self-tapping screw breaks, other tools such as pliers may be needed to get the screw out.The self-tapping screw is a genuine OEM part supplied by the manufacturer. It is made of durable metal. The self-tapping screw is sold individually. It is compatible with machines produced by Troy-Bilt, Bolens, Yard-Man, Yard Machines, Cub Cadet, and Husky. It is used in a variety of lawn tractors, lawnmowers, and other lawn equipment engines.

This is a PTO cable that can be used with many models of riding lawn mowers and garden tractors. The cable is a part of the system that lets the user engage the deck of the mower for cutting. If there are issues with the cable, it will affect the functionality of the tractor. In some cases, the user will not be able to engage the mower deck at all.The rubber-insulated cable is durable and built to withstand a lot of use. However, there is a chance that it could break or have other issues. The connectors might break off, or they could become corroded. The cable could also kink and stop working properly. Regardless of the problem, the cable will need to be replaced for the machine to work correctly.The PTO cable is compatible with models from Troy-Bilt, Cub Cadet, MTD, and Murray. The cable is sold individually. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a rubber grommet that is designed as a replacement for select lawn tractors and mowers. The rubber grommet is a part that is designed to protect parts from abrasion and provide passage for various elements in the mower. It will create a strong and durable seal in the machine but due to constant wear, heat, and vibrations, the rubber could become worn or cracked over time. The grommet could also be lost or misplaced in the process of other repairs. In either case, a replacement with this OEM part will resolve the issue. This genuine OEM rubber grommet is sold individually. Owners should disconnect the power to the tractor and allow the engine to cool completely before replacing this part. Wear gloves for hand safety, as well. The part is manufactured to exact standards by MTD and can be used in machines from Yard Machines, Bolens, MTD, Troy-Bilt, Yard Man, Cub Cadet, and Husky. Owners should refer to the parts diagram for exact placement of this grommet. Installation will require a screwdriver and wrench set.

This replacement part is a fuel valve. This is a genuine replacement part made by MTD. This part is typically found connected to the fuel tank and is able to allow the fuel to leave when necessary, but hold the rest in place during use. A new fuel valve might be needed if the current one is unable to perform the necessary actions. If the fuel tank is leaking or not able to hold the proper amount of fuel, the valve might need to be replaced. Wear work gloves when working with parts that may be covered in fuel. Refer to the proper owner's manual for more information on how to install this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a fuel tank. It is a genuine replacement part made by MTD. This fuel tank is typically found in appliances that use fuel and engines to run. The fuel tank is responsible for holding the fuel before the carburetor uses it to start the engine.A new fuel tank might be needed if the user notices that the current fuel tank is cracked, punctured, or otherwise damaged. This can be due to normal wear and tear. It is common that over time the fuel tank will need to be replaced. It is recommended that the user wear gloves during this repair as the fuel can still be inside the tank. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.

This is a replacement fuel cap with a tether that works for many models of lawn tractors. The fuel cap is used to seal the fuel tank. If the cap is damaged, it could mean that there is a chance of debris getting into the fuel tank. A damaged fuel cap should be replaced for safety.The cap is made from durable plastic, but it may need to be replaced occasionally. If the threads are damaged and it is no longer fitting properly or if it is cracked, the cap should be replaced. In some cases, the fuel cap might be lost. Do not operate the tractor without the fuel cap. The cap can be replaced easily as it simply screws onto place on the fuel tank.This cap works with models of lawn tractors from MTD, Yard-Man, Yard Machines, Troy-Bilt, Cub Cadet, and Bolens. This genuine OEM replacement part is sold individually.

Battery does NOT contain battery acid

This durable metal screw is designed to be used on many types of lawn and garden equipment, such as lawnmowers and snowblowers. The screw can be used to attach different components together so they stay stable and connected to ensure the equipment works correctly. It can be used on a variety of materials including metal, plastic, bricks, and wood. If the screw needs to be replaced, a visual inspection will indicate that. Screws often become damaged over time or can even break. Some screws also become stripped and no longer do what they are intended for. A hex wrench can be used to remove this screw from the machine so the new one can be installed. After installing the replacement screw, it should be tightened to ensure the materials it brings together are kept flush.This screw is made for use with lawnmowers, snowblowers, chipper shredders, and lawn tractors manufactured by MTD, Yard Machines, Yard-Man, and Troy-Bilt. It is sold as an individual part. This is an authentic OEM replacement part that is sourced directly from the manufacturer. A hex wrench may be needed for the replacement.

When interlock switches are working properly, they will keep the engine from starting if there is no foot is not on the brake or if the parking brake is not set. When the switch breaks, it will not allow current to reach the starter even when the brake is on, which means the engine will not start. If the solenoid is not clicking when the ignition key on the tractor or mower is turned, the interlock switch is likely to blame. This is a genuine OEM replacement interlock switch that can help get a lawn tractor up and running again. Is is compatible with riding tractors and mowers from many different brands, including Craftsman, Bolens, Yard Machines, Yard-Man, MTD, and Troy-Built.

This switch spring is part of the safety system used in riding lawnmowers. This spring is located underneath the seat of all riding lawn mowers and lawn tractors. The spring is attached to two electrical contacts and is compressed when the rider is sitting on the seat. If the machine is in motion and the driver stands up or gets off the machine, the switch interrupts the power and stops the mower from moving. If the spring fails to work, it should be replaced in order to operate the mower safely. Over time and due to normal wear and tear, the spring may become warped and need to be replaced. Park the mower on a flat surface and remove the spark plug so that the lawnmower is not powered on. Look underneath the seat and locate the kill switch with a two-wire plug on one end and a round plunger button on top. Grip the wire plugs and pull them away from the switch spring. Install the new switch spring. Reattach the wires and reinstall the spark plugs. This switch spring is an authentic OEM replacement part sourced directly from the manufacturer. It is a silver metal part that is designed for use in lawnmowers manufactured by MTD, Ryobi, Bolens, Yard-Man, Troy-Bilt, Husky, and Cub Cadet.

This is a set of two keys that are used with lawn tractors. Keys are put into the ignition and turned to start the engine.A new set of keys will be needed if the originals are cracked, broken, bent, or damaged in any way such that the key will not slide into the ignition. Keys can also be easy to misplace, which is another reason why someone may want to replace their keys. It's also a good idea to have extras on hand in the event that the keys are lost.This key set is a genuine MTD part. It is sold individually. This particular key set is compatible with lawn tractors that are manufactured by the MTD brand and Craftsman brand.

This part is a replacement handle lever bumper. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or misplaced handle lever bumper in snow blowers.The handle lever bumper provides some cushioning between the frame of the handle and the control lever, making it easier for the user to operate the snow blower. If this part is damaged or misplaced, it will need to be replaced to ensure optimal functionality. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular handle lever bumper, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality rubber. This handle lever bumper can be used with a variety of snow blower models manufactured by Craftsman, MTD, and other brands.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.