Parts for Mtd 13AC762F029: Seat Parts

Replace a faulty main wiring harness if your lawn tractor won't start, has electrical issues, or shows intermittent power loss. Direct fit part.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Replacement spacer for lawn tractors and riding mowers. Prevents excess friction between moving parts. Order a new spacer if yours is worn or missing.

Replacement flat washer for lawn tractors and mowers. Installs on bolts and fasteners throughout the machine. Replace if lost, worn, or damaged.

This replacement part is a screw. This is a genuine replacement part made by MTD. Screws are small but very important in different types of appliances and machinery. Screws are able to hold parts together and keep things secure during use so that the engine is able to run smoothly and efficiently. A new screw might be needed if any are missing or damaged. This can be from normal wear and tear after years of use. It can also be due to the screw becoming stripped over time. This should be a simple repair and require common household tools such as a screwdriver and pliers. Work gloves are recommended depending on where the screw is located in the machine. This is a genuine OEM replacement part which ensures proper fit. This part is sold individually and is sourced directly from the manufacturer.

This genuine OEM replacement bracket stop seat is for riding lawn mowers or tractors. The part is located underneath the seat on riding mowers or tractors. Its purpose is to provide a safety shut off function when the rider leaves the seat while the blade is engaged. Over time, constant use of the mower can cause wear on the bracket, requiring it to be replaced. If a mower is left in the elements over an extended period of time, the bracket could rust. This would require the bracket to need replacing. Failure to replace a worn or rusted bracket stop seat could cause potential safety hazards as the engine may to fail to shut off if the rider should leave the seat while the blade is engaged. Replacing a bracket stop seat requires a screwdriver to replace. It is a fairly easy repair that should take under 30 minutes to complete. This part serves as a replacement if needed for the original bracket stop seat. This bracket is compatible with Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Husky, Montgomery Wards, Bolens, Yard-Man, and Ryobi brands. This bracket is sourced directly from the manufacturer and is sold individually.

Seat pivot bracket for lawn tractors and riding mowers. Secures the seat to the frame and allows adjustment. Replace if cracked, bent, or broken.

Replacement seat adjust lever for riding mowers and lawn tractors. Installs under the seat to control forward/backward positioning. Order if broken or missing.

Hex washer head screw for lawn equipment. Secures components and panels. Replace if stripped, missing, or corroded for proper assembly and fit.

Insulator plate for lawn tractors and riding mowers. Installs between components to reduce vibration and noise. Replace if cracked, worn, or missing.

Spring switch for lawn tractors and riding mowers. Mounts near the switch button. Replace if worn, broken, or damaged from regular use over time.

This actuator spring is a genuine MTD part, sold individually. This actuator spring can be used as a replacement part in a lawn mower. The purpose of the actuator spring, also known as a seat spring switch, in a lawn mower is to provide a plate upon which the seat switch can conduct its electrical current while being held stably in place.If the actuator spring slides out of place and cannot be reinstalled or if it is bent, broken, dented, or worn beyond repair, it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This actuator spring is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

Insulator plate for lawn tractors and riding mowers. Mounts between engine components to provide heat insulation and proper spacing. Replace if cracked or worn.

Right-hand abrasive pad for lawn tractors. Replace when worn or damaged to maintain proper operation. Verify compatibility with your model number.

Right-side running board pad for lawn tractors. Mounts to the tractor frame to provide a footrest surface. Replace if cracked, worn, or missing.

This is the left-hand rubber pad that sits on the running board of a lawn tractor, providing a cushioned and non-slip surface for the operator's foot. It helps reduce vibration and keeps your foot securely in place while riding. Replace this pad if it is worn, cracked, or missing, which can cause your foot to slip during operation.

Left-hand abrasive pad for lawn tractors. Maintains proper friction and performance in drive system. Replace when worn or damaged for optimal operation.

This knob is an OEM replacement part for MTD power equipment. The seat knob is responsible for adjusting the height of the seat to ensure a comfortable and safe position for the operator while using the lawn tractor. It is usually located on the side or the front of the seat and is connected to a shaft or linkage that controls the seat height adjustment.

Causes of a bad knob can include regular wear and tear from frequent use, exposure to harsh weather conditions, or accidental damage. These factors can lead to the knob becoming loose, cracked, or broken, making it difficult to operate the equipment effectively.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting the knob
• The knob slipping or not staying in place
• Visible cracks or breakage
• The knob falling off during use

This MTD replacement part is also compatible with other brands and models within the MTD family, ensuring broad applicability for your outdoor equipment needs.

Extension spring for lawn tractors and riding mowers. Replace this spring if it's broken, stretched, worn, or missing to restore proper tension.

Flat washer flange for lawn mowers, snow throwers, tillers, and edgers. Replace when washer is missing, damaged, or worn to ensure proper assembly.

Replacement seat for lawn tractors and riding mowers. Installs on the operator platform. Needed when original seat is cracked, torn, or broken.

Replacement seat for lawn tractors and riding mowers. Installs on the operator platform. Needed when original seat is cracked, torn, or broken.

This six-sided bolt with an integrated flange secures critical components in the lawn tractor's deck or engine assembly. Found throughout the mower's frame and cutting deck, replace it if the bolt head is stripped, threads are damaged, or the flange is cracked.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

Hex head self-tapping screw for outdoor power equipment. Securely fastens components throughout your machine. Replace if missing, stripped, or worn.

Ratchet clip for lawn tractors and riding mowers. Secures cables or components in place. Replace if broken, missing, or no longer holding properly.

Metal carriage bolt with round head and threaded shank for lawn mowers and snow blowers. Replaces broken or missing hardware during repairs or assembly.