Parts for Ge TBF12DMB: 02 - Section2 Parts

This is a hinge mounting screw designed to secure appliance door hinges to the cabinet or door, restoring proper alignment and stable operation. Durable replacement to fix loose or shifting hinges and reduce noise. What it does:

• Secures the door hinge assembly to the cabinet or door frame for stable door movement
• Restores proper door alignment when a missing or stripped hinge screw causes sagging
• Helps eliminate rattling or looseness at the hinge area
• Works where the OEM hinge fastener is required for correct fit and operation

• Turn off and unplug the appliance before starting any repair that requires removing panels or accessing electrical components
• Use the proper screwdriver or socket to avoid stripping the screw head
• Replace only the matching OEM screw(s); do not overtighten—secure snugly to avoid stripping threads
• If hinge threads are damaged, inspect hinge and mounting area; thread repair or hinge replacement may be required

This is a hinge mounting screw designed to secure appliance door hinges to the cabinet or door, restoring proper alignment and stable operation. Durable replacement to fix loose or shifting hinges and reduce noise. What it does:

• Secures the door hinge assembly to the cabinet or door frame for stable door movement
• Restores proper door alignment when a missing or stripped hinge screw causes sagging
• Helps eliminate rattling or looseness at the hinge area
• Works where the OEM hinge fastener is required for correct fit and operation

• Turn off and unplug the appliance before starting any repair that requires removing panels or accessing electrical components
• Use the proper screwdriver or socket to avoid stripping the screw head
• Replace only the matching OEM screw(s); do not overtighten—secure snugly to avoid stripping threads
• If hinge threads are damaged, inspect hinge and mounting area; thread repair or hinge replacement may be required

The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments. 

All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster. 

Symptoms of a burnt out refrigerator light bulb include:

• Dim or no light illuminating inside refrigerator shelves  
• Shadows and dark spots making it difficult to find items
• Higher utility costs from leaving the door open to see inside

This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models. 

Size: 8-32 t. Includes 12 screws.

This breaker strip is a direct-fit electrical connector used in the bottom freezer compartment to secure and route wiring. It replaces a worn or damaged strip to restore reliable electrical connections and reduce arcing risk. What it does:

• Re-establishes secure connections between freezer wiring harnesses and components
• Prevents loose wires from causing intermittent power, arcing, or blown fuses
• Helps maintain consistent electrical routing and component grounding in the bottom freezer area
• Commonly replaced when connectors are cracked, melted, or no longer hold terminals firmly

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Requires basic hand tools and access to the freezer bottom panel or kickplate
• Match connector orientation and fully seat terminals; do not force mismatched plugs
• Inspect adjacent wiring and terminals for heat or melt damage and replace as needed

This top breaker strip is a replacement trim piece that restores the correct seal and fit along the top edge of the refrigerator door or cabinet opening. It helps maintain proper door alignment and prevents rubbing or gaps. What it does:

• Replaces damaged or worn top trim that can cause gasket misalignment or door rubbing
• Restores a flush fit between the door and cabinet at the top edge
• Reduces air leaks caused by bent or broken trim interfering with the gasket
• Helps the door close smoothly by removing obstruction from a broken strip

• One top breaker strip

• Disconnect power to the appliance before servicing to avoid injury
• Remove any door trim or screws holding the old strip; lift out the old strip and snap or slide the new strip into place
• Retain all fasteners; some models use clips or screws—replace as needed

The Defrost Timer is an OEM part for GE refrigerators. This part manages the defrost cycle of the fridge and freezer compartments, ensuring that the evaporator coils do not build up excessive frost. 

This cycling is crucial for maintaining optimal temperatures for food preservation and energy efficiency. Over time, the defrost timer can malfunction due to wear, electrical issues, or a buildup of dust and debris, leading to poor performance or failure.

Symptoms of a bad Defrost Timer include:

• Frost buildup in the freezer compartment
• The refrigerator or freezer is not maintaining the set temperature
• The fridge or freezer sections are too warm
• The defrost cycle does not activate, leading to reduced cooling efficiency

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This replacement leveling foot stabilizes and supports the appliance so it sits level and steady on the floor. Restores proper alignment for doors and drawers and reduces wobble or rocking. What it does:

• Replaces a worn or damaged support foot to restore proper appliance height and balance
• Helps stop rocking, tipping, or uneven operation caused by an unstable base
• Can improve door alignment and sealing by returning the appliance to a level position
• Quietly supports normal appliance movement without introducing vibration

• Disconnect power and empty or secure contents before adjusting or replacing feet
• Support the appliance with a block or helper to prevent tipping while swapping the foot
• Thread or snap into place per the appliance's mounting design; tighten by hand or with appropriate tool
• Re-level the appliance after installation and verify doors/drawers open and close smoothly