Parts for Lg LFD25860ST / ASTCLGA: Section 3 Parts

The Water Filter is an OEM part for LG refrigerators. It is a component that ensures the purity and quality of your drinking water and ice.

The water filter is designed to effectively reduce contaminants, impurities, and odors from your water supply, providing you with clean and refreshing drinking water. It employs advanced filtration technology to remove substances such as chlorine, sediment, and other potentially harmful particles.

Causes of a faulty water filter can include regular usage over time, expiration of its filtering capacity, or clogging due to sediment buildup. These factors can result in compromised water quality, decreased flow rate, or unpleasant taste and odor.

Symptoms of a bad water filter may include:

• Decreased water flow from the dispenser
• Water with an unusual taste or odor
• Visible discoloration or particles in the water

This OEM LG part can also be used on Kenmore/Sears appliances. 

This replacement screw secures panels and internal components in compatible LG appliances, restoring proper fit and preventing rattles or loose parts. Use it to replace a missing or stripped fastener for a snug, reliable fit. What it does

• Fastens panels, brackets, or components to appliance frame or assemblies
• Helps stop vibration and rattling caused by missing or loose screws
• Restores proper alignment of removable panels or covers
• Works where the original appliance screw has worn, stripped, or gone missing

• Replacement screw as shown

• Disconnect power and water supply to the appliance before beginning any repair
• Use the correct-size screwdriver or driver bit to avoid stripping the head
• Thread carefully and avoid over-tightening to prevent damage to threads or components
• Keep removed screws organized and compare head and length to the replacement before installing

Refrigerator shelf assembly that replaces a damaged or missing internal shelf, restoring flat, secure storage for food and containers. Helps keep items level and organized inside the fridge. What it does

• Replaces a broken, cracked, or missing refrigerator shelf to restore usable storage space.
• Provides a flat, stable surface for jars, bowls, and containers so items won't tip or slide.
• Prevents food from sagging between compartments and improves organization and accessibility.
• Matches factory-fit shelf mounts and seating points for correct alignment when installed.

• Remove all items from the shelf area before installing; handle glass or trim with care and wear protective gloves if needed.
• Slide or seat the shelf into the factory supports or track until it clicks or sits flat; some models require lifting slightly to engage rear tabs.
• No electrical disconnect is typically required, but follow the refrigerator owner's manual and disconnect power if instructed for your model.
• If the shelf has clips or trim pieces, verify they are properly engaged and undamaged before use.

The Refrigerator Door Shelf is an OEM part for LG refrigerators. This component is designed to fit snugly into the door of the refrigerator, providing convenient storage space for frequently accessed items such as drinks, condiments, and snacks. The shelf measures about 15 inches wide, 3 inches high, and 8 inches deep, providing plenty of storage space.

Symptoms of a failing Refrigerator Door Shelf include:

• The shelf becoming loose or failing to hold items securely
• Cracks or breaks in the shelf, which compromise its load-bearing capacity
• Sagging or bending of the shelf, particularly when loaded with heavier items
• Difficulty in fitting the shelf into its designated slots on the refrigerator door

Causes of a bad door shelf can include overloading beyond its weight capacity, frequent adjustment or removal of the shelf, or material fatigue from regular use and exposure to temperature variations within the refrigerator.

This OEM LG part is also compatible with Sears/Kenmore models.

The Shutter Knob is an OEM part for LG refrigerators. This knob is used to adjust the position of the air shutter, controlling the flow of cold air into the refrigerator compartments. Proper adjustment of the air shutter ensures optimal temperature regulation, helping to keep food fresh.

Over time, the shutter knob can wear out or become damaged due to frequent use or accidental impact. If the knob is broken or malfunctioning, it can hinder the ability to control the internal temperature, leading to uneven cooling.

Symptoms of a bad shutter knob include:

• Difficulty in adjusting the temperature settings
• Loose or broken knob
• Uneven cooling within the refrigerator compartments
• Knob not staying in the set position

Causes of a bad shutter knob can include regular wear and tear, accidental impacts, or excessive force applied during adjustments.

This OEM LG part is also compatible with Sears/Kenmore models.

The Screw is an OEM part for LG refrigerators. This part secures the shelf brackets within the refrigerator compartment.

Causes of a bad Screw can range from physical damage or impact to general wear and tear over time. 

Symptoms of a faulty Screw  include:

• Shelves feeling loose or unstable
• Shelves sagging or not sitting level
• Shelves falling out or collapsing when loaded with items

This OEM LG part is also compatible with some Kenmore models.

The Lower Crisper Shelf Frame is an OEM replacement part for LG refrigerators. It is a sturdy plastic frame that supports and secures the crisper drawers or shelves within the refrigerator's fresh food compartment. The white frame measures approximately 33 inches wide and 18 inches long.

Causes of needing to replace the lower crisper shelf frame include physical damage from impact or excessive force, warping or cracking due to temperature fluctuations or moisture over time, or general wear and tear from repeated use.

Symptoms of a bad lower crisper shelf frame include:

• Drawers or shelves becoming loose or unstable, causing items to slide off
• Difficulty sliding the drawers or shelves in and out of their designated positions
• Visible cracks or breaks in the frame material

This OEM LG part is also compatible with Sears/Kenmore models.

Please Note: This part is the frame only, as the glass is not included.

The Drawer Front Cover is an OEM part for LG refrigerators. It is specifically designed to attach to the front of the refrigerator drawer, enhancing the visual appeal while also serving a functional purpose by protecting the contents stored within. The white cover measures approximately 15 inches wide by 4 inches high.

Symptoms of a bad Drawer Front Cover include:

• Cracks or damage that expose the drawer's contents
• Difficulty in attaching or securing the cover to the drawer
• The cover detaching frequently or failing to stay in place

Causes of a bad Drawer Front Cover can include impact damage from loading or unloading items, degradation from frequent cleaning agents, and wear and tear from regular use.

This OEM LG part is also compatible with Sears/Kenmore.

This supporter, holder is the small interior bracket that secures its matching holder/assembly inside your refrigerator. Replace a cracked or missing support to restore a solid, level fit and keep the component from wobbling or dropping.

• Provides structural support for the designated holder/assembly inside the fresh food compartment
• Keeps the component aligned so shelves/covers/bins sit level and operate smoothly
• Direct replacement for a broken, warped, or missing support
• Typical symptoms include: holder won't stay attached, tilting or sagging, rattling when doors close, visible cracks or stripped tabs

• Disconnect power to the refrigerator before servicing
• Remove the item the support holds (such as the related shelf, cover, or bin)
• Release locking tabs and/or remove screws; transfer any reusable hardware
• Align and snap or screw the new support into place, then reinstall the component and verify a secure fit

This Supporter, Cover TV is the structural bracket that supports and secures an appliance cover/panel. Replacing a cracked or bent supporter restores a snug, quiet fit and keeps the cover properly aligned with the cabinet.

• Supports and anchors the specified cover/panel to the frame
• Helps maintain alignment and reduce cabinet vibration or rattling
• Restores stable mounting when the original support is cracked, warped, or missing
• Symptoms include a loose or uneven cover, gaps, or noise during operation

• Disconnect power and allow moving parts to stop before servicing
• Support the cover while removing the old bracket to prevent damage
• Reuse original screws/fasteners and transfer any clips or insulators as needed
• Do not overtighten fasteners, especially into plastic mounting tabs