Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Select Series Snow Removal Equipment Parts

Select Series Lawn Mower Wheel Assembly 8 Inch
Genuine Mtd part
By: Mtd
Part Number: 734-1781

Replaces worn, cracked, or damaged 8-inch wheels on walk-behind lawn mowers. Restores smooth rolling and maneuverability for easier operation.

More
$42.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Snow Blower Auger Shaft Bearing Housing
Genuine Mtd part
By: Mtd
Part Number: 05931A

Replace a worn auger shaft bearing housing causing excessive noise or wobbling auger movement. Fits most single and two-stage snow blowers.

More
$5.35

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Snow Blower Auger Assembly
Genuine Mtd part
By: Mtd
Part Number: 684-04182-0637

Snow blower not throwing snow or clearing poorly? This auger assembly collects and moves snow through the chute. Moderate DIY repair for most models.

More
$215.77

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Snowblower Spiral Assembly
Genuine Mtd part
By: Mtd
Part Number: 684-04183-0637

Fix poor snow discharge with this snowblower spiral assembly. Restores proper airflow for effective snow removal. Direct fit replacement part.

More
$164.59

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series 1/4" Carriage Bolt
Genuine Mtd part
By: Mtd
Part Number: 710-0167

This carriage bolt is a self-locking bolt designed to be used in an unthreaded square or round hole. These bolts are used in outdoor lawn and garden equipment due to their ability to handle heavy weight loads.Carriage bolts are often used to join lawnmower handles to the base of the mower. Over time, the vibration of the lawnmower may cause the bolt to become loose. During routine maintenance, if the bolt is loose, use a wrench to tighten the nut holding the bolt in place. If the bolt is missing, this carriage bolt replacement can be installed. Push the bolt through the hole; if the fit is snug, it may need to be lightly tapped. Once the bolt is through the other side, thread a nut on the bolt. Tighten the nut with a wrench.This is a genuine OEM part sourced directly from the manufacturer. It is sold as an individual unit and does not come with the nut. This carriage bolt is designed for lawnmowers, snowblowers, and other outdoor lawn and garden equipment manufactured by Bolens, Craftsman, Cub Cadet, Huskey, Troy-Bilt, Turf Pro, MTD, Ryobi, and Mastercut.

More
$2.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Lawn Mower Hex Screw
Genuine Mtd part
By: Mtd
Part Number: 710-0352

Hex screw fastener for lawn mowers and outdoor power equipment. Replace if lost, stripped, or damaged during maintenance. Sold individually.

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Lawn Equipment Truss Head Tap Screw
Genuine Mtd part
By: Mtd
Part Number: 710-0779A

Replacement truss head tap screw for lawn equipment engines. Secures various engine components. Replace if missing, stripped, or damaged during maintenance.

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Hex Screw
Genuine Mtd part
By: Mtd
Part Number: 710-0809

This hex screw is a genuine MTD part. A hex screw can be used as a replacement part in refrigerators, humidifiers, lawn mowers, snowblowers, tillers, log splitters, and wood chippers. The purpose of this genuine OEM part is to stabilize and secure the placement of components within the internal or external machinery of one of these appliances.In lawn equipment a screw might easily be lost, misplaced, or damaged; if this occurs, the screw should be removed and replaced by this genuine OEM replacement part so that all components can maintain their placement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This hex screw is compatible with equipment manufactured by MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Sub Zero, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

More
$7.54

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Outdoor Power Equipment Hex Bolt
Genuine Mtd part
By: Mtd
Part Number: 710-0888

Replacement hex bolt for outdoor power equipment. Secures components throughout mowers, tractors, blowers, and tillers. Replace if missing or stripped.

More
$4.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series 1/4-20 Hex Screw
Genuine Mtd part
By: Mtd
Part Number: 710-3015

With small gasoline-powered tools that require control panels, this hex screw attaches the panel to the handles of the tools. Machined to be durable, important screws such as these take a real beating. In their locations at critical points on the handle, the hex screws are considered "wear items," and thus periodically, they must be replaced. The control panel itself is often a location of extreme forces, jostling, and abrupt movement in unpredictable directions. The constant movement, with sheet metal rubbing against the hex screws from every direction, make wear inevitable. The manufacturers recommend that spare screws of this type be kept on hand if the heavy use of the equipment is expected. Among the gasoline-powered tools that use these screws are snowblowers, yard tractors, mowers, tiller, chippers, shredders, and other tools requiring hand-maneuvered levers. These screws are compatible with a number of equipment brands and manufacturers, including MTD, Ryobi, Poulan, Yard-Man, Bolens, Troy-Bilt, and Yard Machines.

More
$4.14

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Drive Chain
Genuine Mtd part
By: Mtd
Part Number: 713-0233

This drive chain is a genuine MTD part, sold individually. A drive chain can be used as a replacement part in a snowblower or a tiller. This genuine OEM part is made out of durable, high quality metal material meant to stand up to exposure to the elements as well as general wear and tear over long-term usage.The drive chain in a snowblower or a tiller can be subject to damage that can render it beyond functionality. If this damage takes the form of puncturing, denting, cracking, warping, or eroding, the drive chain should be removed and replaced by this genuine OEM replacement part in order to guarantee safe continued use of the appliance.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This drive chain is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

More
$47.27

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Snow Blower Impeller Shaft
Genuine Mtd part
By: Mtd
Part Number: 717-0526

If your snow blower won't throw snow or runs roughly, the impeller shaft may be worn or damaged. This rotating component drives the impeller assembly.

More
$136.30

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Snowblower Chute Adapter
Genuine Mtd part
By: Mtd
Part Number: 731-1379D

Chute adapter for snowblowers. Connects the discharge chute to the blower housing. Replace if cracked, broken, or no longer securely holding the chute.

More
$69.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Lawn Mower Fastener Spacer
Genuine Mtd part
By: Mtd
Part Number: 748-0190

Fastener spacer for lawn mowers and snow blowers. Creates proper gap between components to reduce friction. Replace if lost, cracked, or worn.

More
$7.79

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Lawn Mower Hex Nut
Genuine Mtd part
By: Mtd
Part Number: 912-0429

Secures hardware, handles, and connections on lawn equipment. Replace if stripped, corroded, or missing. Standard hex nut for various outdoor models.

More
$6.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Select Series Snow Blower Roll Pin
Genuine Mtd part
By: Mtd
Part Number: 915-0114

Auger won't turn or sheared off? This roll pin connects the driveshaft to the auger and acts as a safety shear pin. Quick 10-minute fix for most models.

More
$13.34

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google