Servistar Tractor

This clutch collar is an authentic OEM part sourced directly from the manufacturer for use in lawnmowers and lawn tractors. If there are problems with the lawnmower jerking and sputtering after changing gears, the clutch collar should be removed and replaced to keep the lawnmower running properly. The clutch collar is part of the clutch bearing. The clutch collar is used between bevel gears as spacers and allows them to move in sync with the pinion gear. If the clutch collar is deteriorated, broken, or missing, a new one should be installed.Make sure the lawnmower is on a flat surface. Remove the spark plug and disconnect the battery. A screwdriver, pliers, socket set, wrench set, and nut driver are required to make this repair. Take the transmission out of the lawnmower. Open the case on the transmission and remove the broken clutch collar. Install the new clutch collar. Reverse the process to reassemble the lawnmower. This clutch collar is a high tensile metal part that is sold individually. It is designed for use in lawn tractors manufactured by Craftsman.

Battery retainer strap secures the battery in place on lawn tractors and walk-behind mowers. Replace if cracked, broken, or missing to prevent damage.

This actuator spring is a genuine MTD part, sold individually. This actuator spring can be used as a replacement part in a lawn mower. The purpose of the actuator spring, also known as a seat spring switch, in a lawn mower is to provide a plate upon which the seat switch can conduct its electrical current while being held stably in place.If the actuator spring slides out of place and cannot be reinstalled or if it is bent, broken, dented, or worn beyond repair, it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This actuator spring is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

Plastic tube for lawn tractors. Installs in mower chassis for fluid routing or cable guide. Replace if missing, cracked, bent, or damaged during use.

Protective cap that covers and secures the axle end on lawn tractors and mowers. Replace if cracked, broken, or missing to prevent debris entry.

Extension spring for lawn tractors and walk-behind mowers. Installs on brake, drive, or deck assemblies. Replace if stretched, broken, or missing.

A flat washer is used in a variety of applications, such as being placed under bolts or nuts as a means to help distribute the load over a larger area and to help ensure the nuts and bolts do not become loose over time. The washers also help to protect the surface from corrosion and damage. Not having washers could reduce the lifespan of a machine. It is important for buyers to replace washers that may have been lost or become damaged. The washers should be checked for signs of corrosion, cupping, or other damage that would necessitate replacement. Buyers should always make sure they are getting the correct size. The flat washer is an OEM part sold individually. It can be used for a range of different types of outdoor machines and more. Some of the types of machines that typically use these washers include lawn tractors, tillers, lawn mowers, chippers, shredders, and snowblowers. Brands include MTD, Yard Machines, Yard-Man, Troy-Bilt, Poulan, and Ryobi.

Flat washer for lawn mowers, tractors, and outdoor power equipment. Replaces worn, missing, or damaged washers during assembly or repair work.

Small metal washer used with nuts and bolts throughout lawn tractors and tillers. Replace when worn, corroded, or missing to maintain secure fastening.

Replacement flat washer for lawn tractors and outdoor power equipment. Install between fasteners to distribute load. Replace if lost, damaged, or worn.

Replacement grease fitting for lawn tractors and mowers. Installs at lubrication points to allow grease application. Replace if damaged, stripped, or missing.

This is a replacement screw that is a genuine part for select outdoor power equipment units. The shoulder screw is a unique screw that is designed to provide a secure fit while still allowing the unit the joint that it needs to operate properly. Depending on the unit and application, this screw is designed to provide rotation for pulleys, gears, and other moving parts. When they are damaged or wear out, or the threads strip, they will need to be replaced. There are several incidents that could cause damage to a shoulder screw. Regardless, a replacement with this genuine OEM part will be necessary. This OEM shoulder screw is manufactured to exact specifications and can be used with models from Cub Cadet, MTD, and Troy-Bilt. This part will require a socket or nut driver to replace. The shoulder screw is a fairly simple replacement. Allow the unit to cool and wear gloves for hand protection. Since this part has multiple applications, owners should consult their parts diagram for the exact placement of this shoulder screw. The screw is sold individually.

If your lawn tractor won't turn or steering feels loose, the steering shaft may be worn or damaged. This part connects your steering wheel to the wheels.

Flange bearing reduces friction in lawn tractor moving parts. Replace if equipment vibrates excessively or makes grinding noises. Verify fit with your model.

This ball detent is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a ball detent is to temporarily keep two parts in place relative to one another, as one or both of the parts rotate.A ball detent might have to be replaced in the event that it suffers damage over time or is lost or misplaced. It is possible for ball detents to fall out of their spot, meaning that the parts that it ordinarily holds in place will not be able to rotate properly. Additionally, a ball detent might have to be replaced if there is material deterioration. If this occurs, a replacement ball detent part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ball detent is compatible with the following brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

Throttle control cable for lawn tractors and tillers. Connects throttle lever to engine carburetor. Replace if cable is frayed, broken, or stuck.