Parts for Whirlpool ITB19440Q03: 07 - Shelf Parts

This stationary freezer shelf replaces a cracked or missing shelf to restore flat, stable storage space for frozen foods. It provides a simple swap to regain organization and load support inside the freezer compartment. What it does:

• Provides a stable, flat surface for frozen food storage
• Supports food containers and prevents items from shifting or falling
• Restores missing or damaged shelving when a shelf is cracked, warped, or broken
• Matches OEM fit and mounting points for a direct replacement when correct for your model

• Remove all contents from the shelf area before replacing to avoid spills or injury
• Slide out the old shelf and align the new shelf with the existing support rails; press into place until seated
• No special tools typically required; refer to your refrigerator's user manual for model-specific guidance

The Humidity Control Slide is an OEM part for Whirlpool refrigerators.This part regulates the humidity levels in the crisper drawers, ensuring optimal conditions for the storage of fruits and vegetables. The slide measures approximately 9 inches wide by 1-1/2 inches deep.

Causes of a bad Humidity Control Slide can include wear and tear over time, physical damage due to mishandling, or buildup of debris that hinders its movement. 

Symptoms of a bad Humidity Control Slide include:

• Inability to adjust humidity settings
• Visible damage or cracks on the slide
• Excessive moisture or dryness in the crisper drawers

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.

• Provides the correct fastener for locations identified in your model's parts diagram
• Helps prevent looseness, vibration, and rattling of panels or brackets
• Replace if the head is stripped, threads are worn, or the screw is missing
• Symptoms can include loose parts, gaps, or noises from movement

• Unplug the refrigerator and shut off water if working near the ice maker or dispenser
• Match length and type to the original; follow your model's parts diagram for placement
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Keep track of screw positions; do not mix different screw lengths or styles

The Crisper Pan is an OEM part for Whirlpool refrigerators. It is designed to store fruits and vegetables, helping to maintain their freshness by providing a controlled environment within the refrigerator. This drawer measures approximately 14.75" X 12.5" X 6.25".

Causes of a bad crisper pan can include cracks or breaks due to accidental impacts, wear and tear from frequent use, or warping from exposure to varying temperatures.

Symptoms of a bad crisper pan include:

• Visible cracks or breaks in the pan
• Difficulty sliding the pan in and out
• Reduced ability to maintain moisture levels, leading to quicker spoilage of produce
• The pan not fitting properly within its designated space

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This crisper brace supports the crisper cover/shelf in 30-inch refrigerators, restoring rigidity so the glass doesn't sag and the drawers slide smoothly. Replace a cracked or missing brace to protect the cover and maintain proper drawer alignment. What it does

• Provides structural support for the crisper cover/shelf
• Helps prevent bowing, sagging, or cracking under load
• Keeps crisper drawers aligned for smooth opening and closing
• Common symptoms: broken/warped brace, sagging cover, drawers binding or misaligning

• 1 crisper brace

• Disconnect power before servicing; remove food from the crisper area
• Pull out crisper drawers and lift off the glass/cover
• Release or unfasten the old brace; seat the new brace fully in tabs or screw locations
• Reinstall the cover and drawers; handle glass carefully to avoid breakage

This replacement frame is the structural support piece that holds and aligns an interior component, helping keep items level and parts seated correctly. Replacing a damaged frame restores proper support, fit, and smooth operation. What it does:

• Provides rigid support for the component it houses
• Maintains alignment so parts fit and move as intended
• Helps prevent sagging, wobble, or poor seating of inserts
• Common symptoms include visible cracks, broken tabs/corners, or difficulty sliding/positioning related parts

• 1 frame

• Disconnect power (and water supply if applicable) before servicing
• Remove contents and any glass/insert from the old frame
• Transfer reusable inserts or hardware from the old frame to the new one
• Ensure all tabs and rails are fully engaged before reloading

This replacement ladder is the OEM-style ladder used to support and stabilize the shelf/rail assembly inside the appliance, restoring proper alignment and preventing sagging or items from shifting during use. What it does:

• Provides sturdy support for the appliance shelf or rail assembly
• Keeps shelves aligned so items sit level and don't slide or tip
• Prevents noise and movement caused by a loose or broken support
• Helps maintain proper interior spacing for storage

• Disconnect power to the appliance before starting any repair
• Remove nearby shelves or trim to access the ladder; keep track of fasteners
• Inspect surrounding clips and rails; replace damaged hardware as needed

This front shelf trim replaces the plastic front piece that secures and finishes a refrigerator door bin, restoring a clean look and a secure lip to hold items on the shelf. It's a direct-fit replacement designed to snap into the existing door bin. What it does:

• Restores the finished front edge of a refrigerator door shelf or bin
• Helps keep bottles, jars and other items from sliding forward
• Replaces cracked, faded or broken trim for improved appearance and function
• Matches OEM fit and mounting points for a secure snap-in installation

• One front shelf trim

• Remove all contents from the door shelf before starting
• Most installations require releasing the door bin and snapping the trim into place; no specialty tools typically required
• Handle plastic parts gently to avoid cracking; avoid excessive force when snapping into position

This replacement rear deli shelf restores a level support surface inside the deli/produce drawer so items sit securely and slide smoothly for organized storage. Fits the original mounting locations and matches factory fit. What it does:

• Replaces cracked, chipped or missing rear deli shelf to restore proper drawer support
• Keeps deli and produce items stable and helps maintain even airflow inside the drawer
• Prevents items from catching on a damaged shelf when sliding the deli drawer
• Matches factory shape so the deli drawer closes and seals correctly

• Simple drop-in replacement; remove drawer to access the shelf before installing
• Handle part with care to avoid chipping; wear gloves to protect hands
• Replace any damaged mounting clips or supports before reinstalling the shelf
• Disconnect power only if required to remove interior lighting or nearby components