Parts for Bosch B18IF800SP/01: Shelfs Parts

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement rack rail guides a dishwasher rack so it slides smoothly and stays aligned during loading and washing. Restores proper rack movement for easier loading and reliable rack support. What it does:

• Guides and supports a dishwasher rack so it slides in and out smoothly
• Keeps the rack aligned to prevent tipping or binding when moving
• Replaces worn or damaged rails that cause noisy or uneven rack movement
• Helps prevent rack from coming off its track during loading or unloading

• Disconnect power and water supply to the appliance before starting any repairs
• Typically installs to the rack assembly with simple fasteners or clips; follow your model's service instructions
• Inspect matching clips, rollers, or guides and replace if worn to ensure proper function
• Test rack movement after installation to ensure smooth operation

This hinge cover mounts over the hinge area to protect the mechanism and give the appliance a clean, finished look. Replace a cracked or missing cover to keep debris out and help the door operate smoothly.

• Covers and protects the hinge assembly from dust and debris
• Provides a finished trim appearance around the hinge opening
• Helps prevent rubbing or catching that can affect door movement
• Typical signs it's needed: cracked, missing, or loose cover; door scraping or clicking near the hinge

• Disconnect power at the circuit breaker before servicing
• Support or close the door to relieve hinge tension while working
• Remove the old cover's fasteners or release tabs; align and secure the new cover
• Confirm a secure fit and smooth door operation before returning to service

This rack rail guides a dishwasher lower rack for smooth sliding and proper alignment so dishes load and unload without catching. It restores stable rack motion and prevents derailment or noisy operation. What it does:

• Guides the lower rack along the tub rails for even, reliable sliding
• Keeps the rack aligned to prevent tipping or catching during cycles
• Reduces scraping, grinding, or clattering caused by damaged rails
• Helps ensure racks fully extend and retract without binding

• Disconnect power and turn off the water supply before starting any repair
• Remove the lower rack to access the rail; reinsert rack after installation to test movement
• Handle edges carefully; replace if bent, cracked, or worn

The Ice Maker is an OEM part for Bosch refrigerators. Located inside the freezer, it automatically produces batches of fresh ice cubes on demand. The ice maker utilizes a water supply line and auger to effectively fill and eject cylindrical ice.

Causes of a bad ice maker can include failures of the electronic control module, worn gears preventing proper rotation, or frozen components restricting movements over time in cold temperatures. 

Symptoms of a bad ice maker include:

• Inability to produce ice or fill the ice bucket  
• Ice cubes ejecting improperly or jamming the chute
• Error codes or indicator lights on the control panel
• Loud abnormal noises during ice-making attempts

Replacing your malfunctioning ice maker restores the convenience of automated ice production. This genuine Bosch part ensures continued reliable operation. Compatible with some Thermador, Gaggenau, and Kenmore refrigerator models.

This retaining clip secures small appliance panels and components to their mounting points, helping keep parts aligned and preventing rattles or loose fittings. A simple replacement to restore proper fit and reduce noise. What it does:

• Holds trim, panels, or wiring harnesses in place at designated mounting points
• Prevents parts from shifting, reducing rattling or intermittent contact
• Restores original alignment where a bent or broken clip caused loose fit
• Works as a direct-fit replacement for the corresponding factory clip

• Turn off power and unplug the appliance before starting any repair
• Access may require removing adjacent panels or trim; keep fasteners organized
• Use pliers or a screwdriver as needed to remove the old clip and snap the new clip into place
• Check surrounding mounting surfaces for deformation before installing

A small retaining clip that fastens a component or panel in place inside your appliance. Replacing a broken or missing clip restores a secure fit so parts stay aligned and don't rattle during operation.

• Holds a mating piece, trim, or cover securely in position
• Helps prevent vibration-related looseness, gaps, and rattling
• Restores proper fit when the original clip is cracked, bent, or missing
• Common signs: loose or wobbly part, misalignment, visible damaged/missing clip

• Disconnect power; shut off water or gas supply
• Note the original clip's orientation; take a photo before removal
• Use needle-nose pliers to release/install; avoid prying on brittle plastics
• Press until fully seated and verify secure engagement before reassembly

A replacement scraper designed to restore a missing or damaged scraper used on compatible Bosch appliances. Replacing a worn scraper helps maintain proper surface contact and clearance so the appliance can operate as intended. What it does:

• Replaces a worn, broken or missing scraper component to restore proper fit and function
• Helps clear debris and maintain correct sealing or movement where the scraper mounts
• Can reduce rubbing or interference caused by damaged scraper edges
• Useful when visual damage or excessive wear is present

• One (1) scraper

• Turn off and unplug the appliance before attempting service
• Remove any panels or components necessary to access the old scraper
• Install the new scraper in the same orientation as the original; do not force or bend the part

This light fixture replaces the lamp holder used in select appliances. It secures the bulb and provides a reliable electrical connection so your appliance lighting turns on consistently again.

• Provides the socket and mounting point for the appliance light bulb
• Restores lighting when a worn, heat-damaged, or loose socket prevents the bulb from working
• Typical symptoms: no light with a known-good bulb, flickering or intermittent lighting, visible burn/heat damage at the socket
• Direct-fit replacement designed for the original location and wiring

• Disconnect power at the breaker before servicing to avoid electric shock
• Allow the area and bulb to cool completely
• Note wire positions; move one lead at a time to the new fixture to maintain correct connections
• Test the light before reinstalling any covers or panels

This is a small press-fit plug used to cap an unused opening on the appliance's cabinet or panel. It restores a clean, finished look while helping keep dust and moisture out of the enclosure. What it does:

• Covers an unused hole or access opening on the appliance panel/cabinet
• Helps prevent debris and moisture from entering the opening
• Restores original appearance when a plug is missing or damaged
• Replaces a plug that no longer stays seated or has cracked

• 1 plug

• Disconnect power (and water, if applicable) before beginning
• Locate the open hole and align the plug squarely with the opening
• Press in firmly until the plug is fully seated and flush
• If access is restricted, remove adjacent trim/paneling per your model's service information