Parts for Electrolux EI23BC37SS3: Shelves Parts

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Carries fresh water between the valve, reservoir, dispenser, and ice maker. Replace if cracked, kinked, or leaking to restore proper water flow.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

Clear glass shelf that installs inside your refrigerator to provide stable food storage. Replace a cracked, chipped, broken, or missing shelf to restore space.

Replace your broken or cracked spill-safe glass shelf. This refrigerator shelf installs inside the fresh food compartment to organize and store food items.

Deli drawer cover frame for your refrigerator. Replaces cracked, broken, or missing frames that support the deli drawer cover. Direct fit replacement.

Supports the glass shelf above crisper drawers and forms drawer tracks. Replace this frame if cracked, warped, or broken to restore stable shelving.

Crisper drawer pan for bottom-mount refrigerators. Holds fresh produce in the lower drawer compartment. Replace if cracked, broken, or missing.

Replacement spacer for refrigerator assembly. Maintains proper spacing between components. Replace if cracked, broken, worn, or missing to restore fit.

Supports and secures crisper drawer glass in your refrigerator. Replace if frame is cracked, broken, or glass shifts during use. Restores stability.

Metal or plastic channel that mounts and aligns refrigerator shelves or door bins. Replace if cracked, broken, or no longer securing shelves properly.

This shelf mounting channel is a replacement support rail that secures refrigerator shelves and helps keep glass or wire shelving aligned for stable storage. It restores proper shelf seating and prevents shelves from shifting or tilting. What it does

• Provides a stable mounting surface for a refrigerator shelf to sit on and lock into place
• Keeps shelves level so items don't slide or tip
• Replaces worn, bent, or broken shelf support channels that cause shelf misalignment
• Works with compatible shelf assemblies to restore intended shelf function

• One shelf mounting channel

• Remove power and empty shelf area before servicing to prevent injury or damage
• Typically snaps or screws into place on the refrigerator liner; reuse existing fasteners when possible
• Compare the new channel to the old part before installation

Secures the shelf channel to the refrigerator cabinet to keep shelves level and stable. Replaces broken or worn mounting brackets for proper alignment.

Deli drawer slide for bottom-mount refrigerators. Installs on the drawer assembly to allow smooth gliding. Replace if cracked, broken, or worn out.

This is a plastic slide rail that mounts inside the refrigerator compartment and supports the crisper drawer, allowing it to glide in and out smoothly. It attaches to the interior wall and guides the drawer along a track. Replace this part if the crisper drawer sticks, wobbles, does not slide evenly, or if the rail is cracked or broken.

Secures panels, trim, and brackets inside your refrigerator. Replace this #8-18 x 3/8 screw if the original is missing, stripped, or worn.

Replacement deli drawer pan for refrigerators. Installs in the deli compartment to hold cold cuts, cheeses, and snacks. Replaces cracked, warped pans.

Secures tubes and wiring in your refrigerator. Replace if clips are broken or connections are loose. Confirm fit with your model number.

Molded plastic mounting bracket that secures and stabilizes refrigerator components. Replaces broken, cracked, or missing brackets to keep parts aligned.

The Water Filter Bypass is an OEM replacement part for Frigidaire refrigerators. It provides an alternative water supply route to bypass the refrigerator's built-in water filtration system. The bypass allows refrigerator water and ice dispensers to operate without water flowing through the installed filter cartridge. 

Causes of a malfunctioning bypass can include mineral buildup inhibiting proper operation of the bypass valve, worn seals or O-rings not providing a tight seal or physical damage.  

Symptoms include:

• Inability to bypass the water filter when needed  
• Leaks from the bypass area
• The filter bypass not functioning or engaging properly

This OEM replacement is also compatible with refrigerator brands like Electrolux, Gibson, Kelvinator, and select Kenmore models.

Connects water filter to refrigerator system for clean water and ice. Replace if leaking, water flow is slow, or filter won't seal properly.

Covers and protects the deli drawer air control assembly in your refrigerator. Replace this vent cover if cracked, broken, or missing to restore airflow.

Replace your refrigerator's insert pan cover if cracked, broken, or missing. This cover protects the insert pan compartment in bottom-mount models.

Restores the finished edge around your refrigerator crisper cover for a clean appearance and proper seating. Replaces damaged, cracked, or missing trim.

Clear cover frame for refrigerator deli drawer compartment. Replace cracked, chipped, or missing covers to restore secure food containment and visibility.

Supports the crisper shelf glass and forms the top of humidity drawers. Replace if cracked, warped, or broken from heavy loads or impact.

This beam-style crisper cover is the glass shelf that sits above the crisper drawer, providing a flat support surface and helping contain spills while keeping produce organized. It restores the shelf surface and proper crisper function. What it does:

• Replaces a broken or missing crisper cover to restore a stable shelf over the crisper drawer
• Helps contain spills and prevents items from falling into the crisper
• Supports produce and other refrigerated items above the drawer area
• Works with the refrigerator's crisper beam/track system to maintain proper clearance and operation

What's included:

• One crisper cover (beam-style) as shown

Install notes:

• Always unplug the refrigerator or shut off power before servicing interior components
• Remove food and any items from the shelf area before installation
• Handle the glass carefully; lift straight up/out from the tracks or supports and slide the replacement into position
• If the cover uses plastic clips or rails, inspect and replace damaged hardware to ensure a secure fit

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.

Replace your refrigerator's ice and water filter housing when you notice leaks, cracks, or improper filter seating. Confirm fit with your model number.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Fix intermittent power loss or component failure with this electrical plug connector. Restores secure wiring harness connections in your refrigerator.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Small retainer clip that secures components, panels, tubes, or wires in place inside your refrigerator. Replace when worn, broken, or missing to restore fit.

Replacement screw secures door handles, brackets, panels, and trim to refrigerator mounting points. Install when hardware is missing, stripped, or loose.