Parts for Electrolux EW23SS65HS2: 09 - Shelves Parts

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Flat freezer shelf for organizing frozen foods. Replaces cracked, bent, or missing shelves to restore storage space in your freezer compartment.

Replacement freezer shelf for side-by-side refrigerators. Restores organized storage when original is cracked, broken, or missing. Fits freezer compartment.

LED light bulb illuminates your refrigerator interior. Replace when bulb burns out, flickers, or stops working. Verify fit with your model number.

Fix intermittent refrigerator operation caused by worn or heat-damaged component sockets. This receptacle restores secure plug-in connections for reliable performance.

This crisper pan cover replaces a damaged or missing drawer cover to help protect and separate fridge produce compartments while keeping cold air circulation consistent. It restores the original fit and function of the crisper area. What it does

• Covers the crisper/drawer area to help contain humidity and protect stored fruits and vegetables
• Helps maintain organized storage and prevents items from spilling into lower compartments
• Fits into the crisper assembly to restore a proper seal and alignment
• Commonly replaced when cracked, warped, or broken from impact or wear

• One crisper pan cover

• Slide or snap into the existing crisper frame—no special tools typically required
• Inspect the crisper tracks and support rails for damage before installing
• Handle carefully to avoid chipping or cracking during install
• Disconnect power only; this is a simple mechanical replacement

Glass insert that sits in the crisper cover frame above your produce drawers. Replace this part if your original is cracked, broken, or missing.

Clear glass shelf that sits above the crisper drawer in your refrigerator. Replace if cracked, shattered, or broken during cleaning or regular use.

Basket hanger for side-by-side refrigerators. Secures door storage baskets in place. Replace if cracked, broken, or missing to restore basket support.

Secures and guides refrigerator storage baskets for proper alignment and smooth sliding. Replace if cracked, broken, or worn to restore basket stability.

This HANGER-BASKET secures the silverware/basket assembly in the dishwasher rack so cutlery and small items stay upright for better cleaning and drying. It replaces a broken or worn rack hanger to restore proper basket support. What it does:

• Holds and stabilizes the silverware basket on the dishwasher rack during cycles
• Prevents the basket from tipping, shifting, or falling into the wash area
• Helps maintain proper spray clearance so utensils receive consistent cleaning
• Reduces noise and wear caused by a loose or damaged basket hanger

• One hanger-basket piece as shown

• Disconnect power and water to the appliance before beginning any service
• Typically installs by snapping or sliding onto the rack rail—confirm orientation before fastening
• Inspect surrounding rack clips and rails for damage; replace if needed to ensure secure fit

Basket hanger slide for refrigerator drawers. Installs on interior cabinet to support pull-out baskets. Replace if cracked, broken, or clips missing.

Right side.

Secures refrigerator drawers to slides for smooth movement. Replace when drawers stick, jam, or fall off tracks. Verify fit with your model number.

Secures a removable basket to your refrigerator, restoring proper support and alignment. Replace if worn, broken, or missing to prevent shifting.

Replacement door basket hanger for side-by-side refrigerators. Secures door storage baskets in place. Replace if cracked, broken, or missing.

Left side.

Secures removable wire baskets inside your refrigerator or freezer. Replace when cracked, broken, or missing to restore stable basket alignment.

Replacement screw for securing panels, components, and assemblies in appliances. Needed when original screws are stripped, lost, or damaged during repair.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Replace your refrigerator's water tank if cracked, leaking, or damaged. This reservoir stores water for the dispenser system in side-by-side models.

Replace your refrigerator's cracked or missing housing cover. Shields internal components, keeps out debris, and restores a clean finished look.

Factory replacement screw for securing panels, brackets, and trim inside your refrigerator. Needed when original screws are missing, stripped, or corroded.

Refrigerator support base plate that mounts components securely. Replace if cracked, broken, or missing to restore proper structural support.

This ice cream shelf is the replacement freezer door bin that holds ice cream and other small frozen items securely on the door. It restores proper storage and helps prevent spills and tipping. What it does:

• Provides a secure shelf/bin for ice cream and similarly sized frozen goods
• Keeps items organized and prevents containers from falling when the door opens
• Replaces cracked, broken, or warped freezer door bins that no longer hold items
• Matches OEM fit to align with existing door supports and retainers

• Remove all food and empty the door before replacing the shelf
• Inspect door supports/rails for damage and align shelf so it snaps into place
• No special tools typically required; handle glass/plastic parts carefully to avoid damage
• Unplug the appliance or turn off power if working near electrical components

Plastic rail that secures the ice cream shelf or bin to your freezer door. Replace when the original rail is cracked, broken, or missing to restore fit.

Right hand side. For the left hand side order 241674401

Left hand side. For the right hand side order 241674402

Wiring harness for refrigerators. Connects electrical components inside the appliance. Replace if wires are frayed, damaged, or connections are loose.

Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.