Parts for Electrolux EW26SS85KS2: Shelves Parts

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This pizza shelf is a direct-replacement oven shelf designed to support pizzas and other flat bakeware for stable, even cooking. Restores a missing or damaged shelf so trays and pans sit level during use. What it does:

• Provides a flat, stable surface for baking pizzas, sheet pans, and similar items
• Replaces a warped, bent or missing pizza shelf that prevents level cooking
• Helps keep cookware centered and supported to reduce sliding or tipping
• Durable finish resists everyday oven use and helps maintain even heat exposure

• Slide shelf onto existing oven rack supports until it sits securely; no tools typically required
• Allow oven to cool before removing or installing the shelf to avoid burns
• Clean with non-abrasive cleaners; avoid harsh scrubbing that can damage the finish
• Follow your oven manufacturer's instructions for safe use and placement

The Glass Shelf is an OEM part for Frigidaire refrigerators. This component provides a stable and durable surface for storing food items within the refrigerator, helping to organize the storage space efficiently. The glass measures approximately 16” by 11.25”.

Over time, the glass shelf can become damaged due to heavy items being placed on it, accidental impacts, or thermal stress from temperature changes. Replacing a damaged shelf ensures safe and effective storage inside the refrigerator.

Symptoms of a bad glass shelf include:

• Cracks or breaks in the glass
• The shelf not fitting securely or wobbling
• Difficulty in cleaning due to damage
• Potential for food items to fall due to an unstable surface

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Lower-position freezer glass shelf that restores a flat, sturdy surface for organizing frozen foods. Ideal replacement when the original shelf is cracked, broken, or missing, helping contain small spills and maintain usable storage space.

• Provides the lower freezer storage surface and supports containers evenly
• Helps contain drips to keep the compartment cleaner
• Replaces cracked, chipped, or shattered glass to eliminate unsafe edges
• Restores lost storage capacity and improves organization

• Unplug the refrigerator and clear the area before handling glass
• Allow the part to reach room temperature to avoid sudden temperature changes
• Wear gloves and handle edges carefully
• Install into the lower shelf supports per your model; do not force

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This front shelf trim replaces a damaged or missing front edge on your refrigerator shelf. It restores a secure, finished lip that supports the shelf and helps keep items and small spills from sliding out.

• Attaches to the front edge of the shelf to provide a finished lip and added support
• Helps contain minor spills and prevents items from sliding off the shelf
• Resolves issues like cracked, warped, or missing trim and a loose or unstable shelf edge
• Common symptoms: broken or chipped trim, loose/missing front edge, shelf not seating or holding properly

• Remove food, lift out the shelf, and place it on a flat work surface
• Release the old trim by disengaging tabs and sliding/pulling it off
• Align the new trim with the front edge and press firmly until fully seated
• Handle shelf components carefully; wear protective gloves and disconnect power if working near internal electrical parts

This oven vent baffle directs heat and airflow from the oven cavity and helps protect internal parts from grease and debris. It restores proper ventilation and can reduce hot spots for more even cooking. What it does:

• Channels exhaust air from the oven cavity to the vent outlet for consistent airflow
• Shields internal oven components from splatter, grease and debris
• Helps maintain proper oven temperature distribution
• Commonly replaced when cracked, warped or missing, or when venting is obstructed

• One replacement oven vent baffle

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use appropriate tools and avoid forcing fasteners to prevent damage to trim or mounting points
• If you encounter damaged mounting hardware, replace it with OEM-equivalent parts

The Crisper Pan Cover is an OEM part for Frigidaire refrigerators. This part provides a stable and flat surface above the crisper drawers while also contributing to the overall organization and functionality of the refrigerator's interior. 

Causes of a bad Crisper Pan Cover can range from accidental damage, such as dropping heavy items on the cover, to normal wear and tear over time. 

Symptoms of a bad Crisper Pan Cover include:

• Cracks or breaks in the glass or plastic panel, which can compromise the structural integrity and appearance of the refrigerator.
• Warping or damage to the frame, making it difficult to fit the cover properly in place or affecting its ability to support weight.
• Difficulty sliding or removing the crisper drawers beneath the cover, possibly due to misalignment or damage to the cover.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Crisper Glass Insert is an OEM part for Frigidaire refrigerators, designed to fit over the crisper drawers. This glass insert provides a sturdy and flat surface for storing fruits, vegetables, and other items in the refrigerator's crisper section, helping to maintain optimal humidity levels and keep produce fresh longer. The glass measures approximately 17.12 inches X 15.40 inches.

Symptoms of a failing Crisper Glass Insert include:

• Cracks or chips in the glass
• Difficulty fitting the glass properly due to damage
• Excessive scratching that obscures visibility

Causes of a bad Crisper Glass Insert can range from accidental damage, such as dropping heavy items on the glass, to normal wear and tear over time. 

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This sliding basket replaces a worn or damaged freezer/refrigerator drawer to restore easy access and organized storage. It lets you slide food in and out smoothly so you can reach items without removing shelves. What it does:

• Replaces cracked, bent or non-sliding drawer baskets for proper storage
• Slides on existing tracks to provide smooth access to stored items
• Keeps frozen or refrigerated items organized and contained
• Prevents items from falling through damaged or missing baskets

• Remove all contents and disconnect power to the appliance before servicing
• Slide the old basket out of the tracks and align the replacement with the same rails
• Inspect track rollers and guides; clean or replace hardware if worn for smooth operation
• Use caution handling edges; follow appliance manufacturer's service instructions

This hanger-basket is the shelf support that secures and guides a refrigerator/freezer storage basket, restoring proper fit and smooth sliding. Replaces a worn or broken basket hanger to keep the basket aligned and supported. What it does:

• Holds and supports the basket so it stays level and rides on its tracks
• Keeps the basket from sagging or catching when pulled out
• Restores proper alignment and smooth in-and-out movement
• Helps prevent the basket from falling out or becoming loose

• Remove the basket and empty contents before replacing the hanger
• Inspect mounting tabs and mating track for damage; replace other damaged parts as needed
• Installation usually involves aligning the hanger with the track slots and snapping or fastening it into place; use basic hand tools if required
• Wear gloves to protect hands and handle parts carefully to avoid sharp edges

Right side.

The Slide Clip is an OEM part for Frigidaire refrigerators. It is designed to help secure and support the refrigerator's drawer slides, ensuring smooth and stable movement of the drawers inside the fridge

Symptoms of a bad Slide Clip include:

• Drawers sticking or jamming when pulled in or out.
• The drawer sagging or failing to close properly, which may impact cooling efficiency.
• Unusual noises, such as scraping or clicking, when moving the drawers.

Causes of a bad slide clip can include normal wear and tear from frequent use, accidental damage during cleaning or storing items, or a poor fit that leads to increased strain on the clip.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models, making it a versatile repair solution for multiple refrigerator brands.

This hanger secures a removable basket to the appliance, restoring proper support and alignment so the basket stays in place during normal use. Designed to replace a worn, broken, or missing hanger and help prevent the basket from falling or shifting. What it does:

• Secures a removable basket to its mounting point so the basket hangs correctly
• Replaces damaged or broken hangers that allow the basket to slip or fall
• Restores proper alignment to prevent rubbing, jamming, or uneven wear
• Works with the factory basket mounting system without modification

• One hanger-basket

• High-level replacement; generally requires simple hand tools and basic disassembly of the basket area
• Inspect adjacent clips, rails, and mounting points for damage and replace if needed
• Disconnect power or follow appliance-specific safety instructions before working near electrical components

Left side.

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This is a factory replacement screw fastener used to secure components in your appliance. It restores a tight, rattle-free fit for panels, brackets, and trim when an original screw is missing, stripped, or corroded.

• Secures panels, brackets, and trim to the appliance cabinet or liner
• Replaces a missing, stripped, or rusty screw
• Helps eliminate looseness, vibration, or rattling components
• Maintains proper alignment and a clean, factory fit

• Unplug the appliance before servicing; if near water lines, shut off the supply
• Match to the original and install in the same location/orientation
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• Keep and reuse any original washers or spacers if present

Right hand side. For the left hand side order 241674401

Left hand side. For the right hand side order 241674402

This cabinet insulation panel replaces the worn or damaged foam that surrounds the refrigerator compartment to help preserve internal temperatures and improve cooling consistency. It restores proper insulation where the original panel is missing or degraded. What it does

• Replaces torn, compressed, or missing cabinet insulation to help maintain refrigerator/freezer temperatures.
• Reduces cold air loss from the cabinet cavity that can cause frost buildup or longer run cycles.
• Helps the appliance reach and hold set temperatures more reliably.
• Supports proper airflow and component spacing behind liners and panels.

• Disconnect power before beginning any service to avoid electrical shock.
• Access may require removing interior liners or trim; keep fasteners organized for reassembly.
• Handle foam gently to avoid tears; position with the vapor barrier facing the original orientation.
• Use OEM instructions and replacement diagrams for exact placement; if adhesive is used, apply as directed by manufacturer.

This wire cover is a molded shroud that protects and organizes an appliance's wiring harness, helping prevent abrasion and accidental snagging for safer, more reliable operation. What it does:

• Shields wiring from contact with sharp edges and moving parts
• Helps reduce wear and chafing that can cause exposed conductors
• Keeps harnesses routed neatly to prevent pinching or interference
• Can help address symptoms like visible wire damage, intermittent electrical connections, or burning/plastic-odor concerns

• Disconnect power to the appliance before starting any work
• Typically secures with clips or screws after removing an access panel; basic hand tools usually required
• Verify proper routing and secure attachment so wires are not pinched
• If wiring shows damage, replace or repair wiring harness before reinstalling the cover