Parts for Frigidaire FFHT1425VB: Shelves Parts

This shelf assembly is a replacement glass shelf with trim that restores usable storage space and a finished interior look in your refrigerator. It provides a stable, easy-to-clean surface for food and containers. What it does:

• Replaces a cracked, chipped, or missing shelf to restore storage and organization
• Supports food containers and small appliances inside the refrigerator compartment
• Provides a smooth, washable surface that helps contain spills for easier cleanup
• Helps maintain even airflow when positioned correctly on the shelf supports

• Handle glass carefully; set on a soft, flat surface to avoid damage during installation
• Remove food and any items from adjacent shelves before replacing
• Align shelf trim with cabinet rails and slide into place until fully seated

This shelf assembly restores a flat, stable storage surface inside the refrigerator so dishes and food sit securely and the interior stays organized. It replaces damaged or missing shelves to help prevent spills and slipping items. What it does:

• Provides a stable surface for storing containers, produce and leftovers.
• Replaces cracked, chipped or broken shelves to reduce spills and improve safety.
• Restores adjustable shelving positions and refrigerator organization.
• Helps keep items level and prevents food from sliding during door use.

• Always unplug the appliance or disconnect power before working inside the refrigerator.
• Remove food, loose shelves and drawers as needed to access the mounting area.
• Handle edges with care—wear cut-resistant gloves if the shelf is glass or has exposed trim.
• Align shelf with existing supports and seat clips without forcing; if mounting hardware is damaged, replace hardware.

This shelf assembly replaces a cracked, chipped, or missing refrigerator shelf to restore stable storage and proper organization inside the fresh food compartment. Durable glass provides a flat surface for storing food and containers while keeping items visible. What it does:

• Replaces a damaged or missing interior refrigerator shelf so items sit level and won't shift
• Restores usable storage space and helps keep food organized and accessible
• Supports typical refrigerator containers, bowls and packaged foods
• Helps maintain airflow and visibility between compartments without blocking vents

• One shelf assembly

• Remove food and store safely before installing; handle glass carefully to avoid damage
• Slide shelf into existing shelf tracks or supports until it seats securely; do not force
• Wear gloves and eye protection when handling broken glass
• No special tools required for most installs; refer to your appliance manual for model-specific guidance

This support is a structural mounting piece that secures and stabilizes a component inside your appliance. Replacing a cracked or missing support restores proper alignment, keeps parts level, and helps prevent wobble, vibration, or parts slipping out of place.

• Provides a mounting point and structural stability for the mated part
• Maintains correct position and spacing for reliable operation
• Helps reduce movement, rattling, and premature wear
• Common signs of failure: cracks, broken tabs, looseness, or the attached part sagging/falling

• Disconnect power; also shut off water or gas
• Wear cut-resistant gloves; cabinet edges and components can be sharp
• Remove the damaged support and transfer/reuse original screws or clips if required
• Install in the same orientation and verify the supported part seats securely before restoring service

This replacement drawer assembly restores a refrigerator crisper bin for organized cold-food storage and smooth sliding access. Ideal when a drawer is cracked, broken, missing, or no longer slides properly. What it does:

• Provides a secure bin for fruits, vegetables and other refrigerated items.
• Restores smooth sliding and containment when an original drawer is damaged or missing.
• Helps prevent items from falling onto lower shelves or the refrigerator floor.
• Works with existing drawer slides; does not repair worn or bent slide hardware.

• Remove all contents and empty the existing drawer before starting.
• To remove old drawer, pull fully forward and lift/tilt to disengage from the slide rails; reverse to install the new drawer.
• Inspect slide rails and mounting points; replace damaged slide hardware before installing the new drawer.
• Handle carefully to avoid breakage or injury; wear gloves if edges are sharp and dispose of broken parts properly.

Restore safe, level storage space with this refrigerator shelf assembly. Replace a broken or missing shelf to regain capacity and keep items organized and stable inside your appliance.

• Provides a flat, supportive surface for food storage in the designated compartment
• Helps keep items level and organized when properly seated in the support rails or clips
• Replace if the shelf is cracked, warped, or has broken end tabs/supports
• Common symptoms: shelf won't sit level or stay in place, wobbles/rattles, or is missing

• Remove food from the area; wear cut-resistant gloves and handle carefully to avoid damage or injury.
• Lift slightly and slide the old shelf out of the side rails; do not force against liners or tabs.
• Transfer any trim/end caps from the original shelf to the new one if required by your model.
• Slide the new shelf into the rails until fully seated and level.

The Crisper Drawer Assembly is an OEM part for Frigidaire refrigerators. Located in the refrigerator door, the crisper drawer provides a humidity-controlled storage space for fruits and vegetables. It consists of removable crisper bins nestled securely within an outer frame and guided tracks.

Causes of a bad crisper drawer can include worn slide tracks, broken supporting structures, or failed humidity control systems. 

Symptoms of a bad Crisper Drawer Assembly include:

• Produce drying out more quickly  
• Difficulty smoothly opening or closing drawer
• Loose or detached crisper bins  
• Drafts or cold air leakage from drawer area

This genuine Frigidaire assembly is compatible with some Electrolux, Kelvinator, Gibson and Kenmore models as well.

This replacement frame is the outer panel that supports and finishes the appliance opening, restoring a secure fit and clean appearance. It replaces a damaged, bent, or worn frame to help the door or control area seal and align correctly. What it does:

• Provides the exterior trim and structural support around the appliance opening
• Restores proper alignment and fit when the existing frame is bent, cracked, or loose
• Helps maintain a proper seal and prevents gaps that can affect performance or allow debris
• Returns the appliance to a finished, factory appearance after damage or wear

• One replacement frame

• Disconnect power (and water if applicable) before beginning any repair
• Typical installation requires removing screws and gently prying the old frame; keep fasteners for reuse if undamaged
• Handle edges carefully to avoid cuts and cosmetic damage

The Sensor is an OEM part for Frigidaire refrigerators. It monitors and regulates the temperature of your refrigerator. It is responsible for accurately measuring and regulating the temperature inside the refrigerator, ensuring stable cooling.

A bad sensor can be caused by electrical issues, sensor failure, or physical damage. Signs of a faulty temperature sensor include inconsistent cooling, incorrect temperature readings, or the refrigerator not maintaining the desired temperature.

Symptoms of a bad sensor can include:

• Inconsistent cooling
• Incorrect temperature readings
• Failing to maintain the set temperature 

Replace your malfunctioning sensor with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This duct routes internal airflow to help maintain even cooling and proper ventilation inside the appliance. It replaces a damaged, cracked, or missing duct to restore correct air distribution and reduce temperature or frost issues. What it does

• Channels cold air from the evaporator to the compartment to support consistent cooling.
• Prevents air leaks that can cause uneven temperatures or frost buildup.
• Stops rattling or vibration caused by a broken or loose duct.
• Helps maintain efficiency by directing airflow where the appliance was designed to circulate it.

• One duct

• Always disconnect power before beginning any repair.
• Remove outer panels or shelving as needed for access; handle plastic parts carefully to avoid breakage.
• Ensure proper orientation and secure mounting so the duct seals against mating surfaces.
• If other airflow components are damaged, inspect and replace them as needed for best results.

This wiring harness is a factory-style replacement that restores electrical connections between appliance components, helping return controls, lights and powered features to normal operation. Fits the original connector layout for straightforward swap-out. What it does:

• Routes power and signal between control components and modules
• Replaces damaged, frayed or burned wiring that can cause intermittent operation
• Helps resolve symptoms like controls not responding, lights or displays failing, or intermittent power to components
• Preserves original connector types and terminal positions for correct electrical fit

• Always disconnect power before inspecting or replacing wiring to avoid shock or damage
• Match connector shapes and pin positions to the original before installing
• Avoid pinching or sharply bending wires; secure harness with factory clips or ties

This LED interior light assembly provides bright, long-lasting illumination for the refrigerator compartment so you can see contents clearly. Designed to replace a dim, flickering, or non-working interior light. What it does:

• Replaces a failed or flickering refrigerator interior light to restore visibility
• Provides cool-running LED illumination with immediate full brightness
• Fits into the refrigerator light housing and connects to the factory wiring
• Helps you locate items quickly and reduces the need to keep the door open

• One LED light assembly

• Disconnect power to the appliance before installing to avoid shock hazard
• Remove the existing lens/cover and unplug the old light assembly from its connector
• Plug in the new assembly, secure the lens/cover, and restore power to test

This is a replacement mounting screw used to secure appliance panels and small components so parts stay firmly in place during normal use. Installing the correct screw restores proper fit and reduces rattles or loose trim. What it does:

• Fastens panels, brackets, or trim to the appliance frame
• Keeps components aligned to prevent vibration and noise
• Replaces a lost or stripped screw to restore secure attachment
• Helps maintain safe, stable operation by holding parts where they belong

• One replacement mounting screw

• Disconnect power and water before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can damage threads or panels
• Keep removed fasteners organized so you reinstall them in the original locations