Parts for Frigidaire FFHT1514TS2: Shelves Parts

The Freezer Shelf is an OEM part for Frigidaire freezers. It provides additional storage space within the freezer, allowing for organized storage of frozen foods. The shelf is designed to fit securely within the freezer compartment, supporting the weight of various frozen items.

Common causes of a bad freezer shelf include cracking or breaking due to heavy loads, wear and tear from frequent use, or damage from accidental impacts.

Symptoms of a bad Freezer Shelf include:

• Visible cracks or breaks in the shelf
• Difficulty in fitting the shelf securely within the freezer
• The shelf not staying in place or collapsing under weight

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This door gasket seals the refrigerator or freezer door to maintain proper temperature and efficiency. Replaces a worn or damaged seal to help prevent air leaks, frost buildup, and uneven cooling. What it does:

• Creates an airtight seal between the door and cabinet to keep cold air in
• Helps reduce frost and ice buildup in freezer compartments
• Can improve temperature consistency and energy efficiency when functioning correctly
• Common symptom fix: visible gaps, torn or compressed seal, or frequent frosting

• One door gasket

• Turn power to the appliance off before starting any work
• Remove the old gasket and clean the door flange thoroughly before installing the new seal
• Press the gasket into the channel evenly; allow time for the gasket to form to the door if recommended by the OEM
• Refer to model-specific instructions for any clips, screws, or heating steps required to seat the gasket fully

The Light Switch is an OEM replacement part for Frigidaire refrigerators. This switch controls the interior light of the refrigerator, turning it on when the door is opened and off when the door is closed. It ensures that the refrigerator is properly illuminated, making it easier to find items inside.

Causes of a bad light switch can include electrical malfunctions, physical damage from repeated use, or wear and tear over time.

Symptoms of a bad Light Switch include:

• Interior light not turning on when the door is opened
• Light flickering or intermittently turning on and off
• The refrigerator light staying on even when the door is closed

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

• The oven interior remains dark when the light switch is engaged.
• Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
• Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This refrigerator light socket holds and powers the interior bulb so you can clearly see inside. Replace a cracked, heat-damaged, or loose socket to restore reliable illumination when the interior light won't work or flickers.

• Provides the electrical connection and mounting point for the compartment light bulb
• Fixes symptoms such as no interior light with a known-good bulb
• Addresses intermittent flickering when the door is opened or closed
• Helps resolve visible charring, melting, or broken contacts on the socket
• Corrects a loose bulb that won't stay seated or lit

• Disconnect power to the refrigerator before servicing; remove the light lens/cover and bulb
• Note wire positions; release the old socket from its mount
• Transfer wires to the new socket one lead at a time and seat the socket fully
• Reinstall the bulb and cover; restore power and test
• Use only the bulb type and wattage specified for your model

This electronic control module manages and coordinates the appliance's functions, restoring responsive controls and timed cycles when the original module fails. Replaces a faulty control board to help return normal operation to the unit. What it does:

• Receives inputs from the user interface and sends commands to motors, valves, heaters, and other components
• Regulates timed cycles and sequencing for proper operation
• Common symptom: no response from controls, display blank, or unresponsive buttons
• Common symptom: appliance runs only on a single cycle, won't start, or shows recurring error codes tied to control faults

• One control box (electronic control module)

• Disconnect power to the appliance before testing or replacing the module
• Handle the board carefully and avoid touching circuit traces or connectors; use ESD precautions when possible

The Control Box Assembly is an OEM part for Frigidaire refrigerators. This complete assembly includes the electronic components and housing necessary to manage the refrigerator’s operations, such as temperature regulation, defrost cycles, and other vital functions.  

Causes of a bad control box assembly can include electrical surges, moisture damage, or normal wear and tear over time. Additionally, physical damage or faults in the wiring can lead to control box failure.

Symptoms of a bad control box assembly include:

• The refrigerator not cooling properly
• Error codes displayed on the control panel
• Inconsistent or fluctuating temperatures
• The refrigerator or freezer not defrosting as needed
• Unresponsive control buttons

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Temperature Sensor (10K NTC) is an OEM replacement part for Frigidaire refrigerators. This sensor monitors the internal temperature of the refrigerator or freezer compartment, sending signals to the control board to regulate cooling cycles. It ensures the appliance maintains the correct temperature for optimal food preservation.

Temperature sensors can fail due to wear over time, electrical issues, or exposure to moisture. A malfunctioning sensor can cause inaccurate temperature readings, leading to improper cooling or freezing.

Symptoms of a bad temperature sensor include:

• Fluctuating or incorrect temperatures in the refrigerator or freezer
• Food spoiling faster than expected or freezing inappropriately
• Error codes related to temperature regulation
• The refrigerator running continuously or cycling too often

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Control Board is an OEM part for Frigidaire refrigerators. It functions as the central processing unit for the refrigerator, overseeing and coordinating the appliance's various operations, including cooling efficiency, defrost cycles, and temperature management. 

Causes of a bad control board can range from electrical surges that damage the circuits, to moisture infiltration, or simple wear and tear over time that degrades its components. 

Symptoms of a bad control board include:

• Inconsistent cooling or unexpected temperature fluctuations
• The refrigerator cycling too frequently or not running long enough
• Digital displays or controls malfunctioning or becoming unresponsive
• Unusual noises or the refrigerator abruptly stopping and starting

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Refrigerator Shelf is an OEM part for Frigidaire refrigerators. This shelf provides sturdy storage space within the refrigerator, helping to organize food items and maximize the use of available space. The shelf measures approximately 24 inches in width and 16.25 inches in length.

Over time, refrigerator shelves can become damaged or worn due to heavy loads, spills, or accidental impacts. These issues can compromise the shelf's stability and usability.

Symptoms of a bad refrigerator shelf include:

• Cracks or breakage in the shelf material
• Difficulty fitting the shelf securely in its slots
• The shelf sagging or failing to support items properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Humidity Control Slide is an OEM part for Frigidaire refrigerators. This part regulates the humidity levels within the crisper drawers, helping to keep fruits and vegetables fresh for longer periods. The slide allows users to adjust the ventilation in the crisper, providing optimal storage conditions for different types of produce.

Causes of a bad humidity control slide can include regular wear and tear, accidental breakage, or misalignment that prevents it from moving smoothly.

Symptoms of a bad humidity control slide include:

• Difficulty adjusting the humidity settings
• The slide feeling loose or falling off
• Produce not staying fresh as long as expected
• Visible damage or cracks on the slide mechanism

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Frigidaire humidity control slide is an OEM replacement part responsible for regulating and adjusting the humidity levels within the crisper drawers of a refrigerator. This slide is found on the fresh food drawer to allow adjustment of the amount of moisture retained in the crisper drawers, which is essential for preserving the freshness and crispness of fruits and vegetables.

By adjusting the humidity control slide, users can create an ideal environment for different types of produce, ensuring that they stay fresh for longer periods and preventing food waste from wilting or drying out prematurely.

This part fixes the following symptoms

• Inability to adjust or control the humidity levels within the crisper drawers.
• Produce items wilting or drying out quickly due to improper humidity regulation.
• The control slide becoming loose, stuck, or difficult to move.

This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This crisper cover frame sits above the refrigerator's produce drawers, supporting the glass shelf and forming the slide rails the drawers use. Replacing a damaged frame restores smooth drawer operation and safe, level storage space.

• Supports the crisper cover glass and the weight of stored items
• Provides integrated tracks for crisper drawers to slide properly
• Helps keep drawers aligned and prevents shelf sagging
• Common symptoms: cracked/broken frame, sagging shelf, drawers that stick, bind, or drop

• Empty the area and remove the crisper drawers
• Lift out and set aside the glass insert carefully, if present
• Remove the old frame and transfer any reusable trim from the original
• Seat the new frame, then reinstall the glass and drawers; handle glass with care and watch for sharp edges

This Crisper Drawer is an OEM replacement part for Frigidaire refrigerators. It is designed to store your fruits and vegetables, keeping them fresh and crisp for longer.

Symptoms of a bad crisper drawer include:

• Excessive moisture in the drawer
• Difficulty opening or closing the drawer
• Visible cracks or damage on the drawer

Causes of crisper drawer issues generally stem from overloading, which can lead to cracks and damage, or wear and tear over time that affects the drawer's smooth operation and sealing capabilities.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Crisper Glass is an OEM replacement part for Frigidaire refrigerators. This transparent glass covers the crisper drawers storing fruits and vegetables.

Causes of damaged crisper glass can include chip or crack damage from overloading/slamming the drawer, prolonged exposure to cold air causing glass to become brittle, or mineral etching obstructing visibility over time.

Symptoms involve:

• Reduced visibility and lighting inside crisper drawer storage
• Potential safety hazards from sharp broken glass edges if cracked
• Inability to efficiently view contents or organize drawer items

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This control box is the protective enclosure that supports and secures an appliance's control components. Replacing a damaged box restores proper fit, alignment, and protection for the controls so they operate as designed.

• Houses and protects the control components, keeping them properly mounted and aligned
• Provides the correct mounting points for knobs/buttons and any attached light lens in the control area
• Helps route wiring and airflow around the control area per design
• Common symptoms: cracked or broken plastic, loose/sagging control assembly, misaligned controls, rattling/vibration from the control area

• Disconnect power to the appliance before servicing
• Remove panels/shelves as needed to access the control area; take off knobs/lens and the fasteners securing the box
• Support the assembly and transfer existing controls, wiring, and hardware from the old box to the new one; match connectors and wire routing
• Reinstall fasteners, restore power, and verify proper control operation before returning the unit to service

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This refrigerator shelf spacer positions and supports a shelf so it sits secure and level. Replacing a worn or missing spacer helps eliminate wobble or shifting and restores proper fit and alignment inside the compartment. What it does

• Maintains correct spacing and alignment for the shelf
• Helps keep the shelf level and secure in its track or frame
• Replaces cracked, deformed, or missing spacers
• Symptoms can include a loose, tilted, or rattling shelf, or visible gaps where the shelf should seat

• One shelf spacer

• Disconnect power to the refrigerator before servicing
• Remove the shelf to access the spacer location
• Gently pry out the old spacer; avoid stressing plastic or glass components
• Press the new spacer firmly into place and reinstall the shelf, ensuring proper orientation