Parts for Frigidaire FFHT1814VB0: Shelves Parts

The Freezer Glass Shelf is an OEM part for Frigidaire side-by-side refrigerators. Crafted from durable tempered glass with raised edges, the shelf provides an organized storage surface for frozen items. 

Causes of a bad freezer glass shelf include cracking or chipping of the glass surface from falls or impacts over time. The plastic edge trim could also show wear and loose or brittle areas.

Symptoms of a bad freezer glass shelf include:

• Glass surface with cracks or chips that compromise integrity  
• Shelves that tip or become unstable while loaded
• Warped or deformed plastic trim no longer fitting properly
• Missing or damaged supporting brackets

This genuine Frigidaire shelf is compatible with some Electrolux and KitchenAid bottom freezer models.

This replacement shelf restores a flat, stable surface for storing food and containers in your refrigerator. Swap in a new shelf to regain lost space, keep items organized, and prevent spills from a broken or missing original.

• Provides a sturdy, level surface inside the fresh food or freezer compartment
• Helps organize contents and maximize usable storage capacity
• Engineered to fit designated rails/tabs for the correct position in compatible models
• Replace if cracked, broken, warped, missing, or if it no longer seats securely/level

• Handle carefully; support the shelf evenly to avoid stress or breakage
• If working with a cold glass shelf, let it warm slightly to room temperature before handling
• Make sure side tabs/slots are fully engaged on the correct rails and the shelf sits level
• Disconnect power if moving interior light assemblies or working near electrical components

The Clip is an OEM part for Frigidaire refrigerators. It is a small but crucial component that helps secure and hold various parts in place within the refrigerator's interior or exterior.

Causes of a bad clip in a refrigerator can include wear and tear over time, brittleness due to age or exposure to temperature changes, or accidental breakage during cleaning or maintenance.

Symptoms of a bad clip in a refrigerator may include:

• Loose or detached shelves, bins, or door components
• Rattling or vibration noises coming from the interior
• Improper alignment or fit of shelves or door components
• Potential safety hazards if electrical wiring is not properly secured

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Clip is an OEM replacement part for Frigidaire refrigerators. It works to securely hold various refrigerator components such as shelves or baskets in place. The clip applies tension to prevent shelves from shifting or drawers from opening unintentionally during regular usage and cleaning. 

Causes of a bad clip can include cracks or breaks from over-tightening or repetitive fastening and unfastening over time. The clip’s plastic material can also become brittle or misshapen with age.

Symptoms of a bad clip include: 

• Shelves or baskets that no longer stay firmly in place and slide around easily inside the refrigerator 
• Gaps appearing around refrigerator shelves where the clip has failed to hold tightly
• Difficulty accessing certain refrigerator areas if shelves or other components now slide freely

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This pan assembly is the lower drip tray that sits in the appliance base. It collects and channels water away from sensitive components to help protect floors and reduce moisture-related damage.

• Collects incidental water in the base and directs it away from components
• Helps support leak/overflow protection systems where equipped
• Replace if cracked, warped, or leaking
• Symptoms can include water under the unit, pooling in the base, or repeated leak alarms
• Visual damage or staining on the pan indicates it's time to replace

• Disconnect power; shut off the water supply
• Access the base by removing lower panels or sliding the unit out
• Transfer any reused sensors, switches, or hardware from the original pan to the new one
• Inspect seals, re-level the unit, and test for leaks before final placement

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator and freezer compartments, making it easier to see and organize food items. This energy-efficient LED bulb ensures bright, long-lasting light with minimal energy consumption.

Causes of a bad LED light bulb can include electrical issues such as power surges, wear and tear over time, or damage due to impact or moisture exposure.

Symptoms of a bad LED Light Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Discoloration or reduced brightness

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding and connecting the light bulb in the refrigerator, allowing for proper lighting inside the appliance.

A bad light socket can be caused by electrical issues, physical damage, or wear and tear over time. Signs of a faulty light socket include a non-functional light bulb, flickering or dim lighting, or a loose connection.

Symptoms of a bad light socket can include:

• The refrigerator light not turning on 
• Intermittent flickering or dimming of the light
• Difficulty in installing or removing the light bulb
• Visible damage on the socket

Replace your malfunctioning light socket with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This housing assembly replaces a damaged or cracked outer housing to restore proper fit and protect internal components. It helps stop drafts, reduce vibration, and keep internal parts properly aligned for reliable operation. What it does:

• Protects internal components and wiring from damage and debris
• Maintains correct alignment for attached components and controls
• Helps reduce noise and vibration caused by a broken or loose housing
• Prevents gaps that can lead to leaks, drafts, or improper sealing

• Disconnect power to the appliance before beginning any repairs.
• Some disassembly of surrounding panels may be required; keep fasteners organized.
• Use basic hand tools; avoid forcing parts to prevent further damage.

This replacement control knob restores tactile control for a stove or oven burner, giving a safe, easy way to select heat settings and operate the appliance. It's a direct-fit user control designed to replace worn, cracked, or missing knobs. What it does

• Replaces a damaged, loose, stripped, or missing control knob used to set burner or oven temperature/function.
• Provides a clear grip and indicator for accurate setting selection.
• Restores safe manual control when the original knob is broken or won't turn.
• Simple push-on design aligns with splined valve/stem for reliable operation.

• Disconnect power (and gas supply on gas ranges) before removing or installing parts.
• Pull the old knob straight off the splined stem; push the replacement knob fully onto the splines until seated.
• If the knob does not fit or turn smoothly, do not force it.

This replacement screw fastens appliance components so panels, brackets, and covers stay securely in place. Replace a missing, stripped, or damaged screw to restore a tight fit and help prevent vibration or noise. What it does:

• Secures panels, brackets, trim, or covers as designed for your model
• Replaces missing, rusted, or stripped hardware
• Helps correct loose or misaligned components
• Reduces vibration and rattling from loose fasteners

• Includes: 1 screw

• Disconnect power before servicing
• Wear gloves and eye protection
• Use the correct driver to avoid stripping the screw head
• Tighten snugly without overtightening; refer to your model's parts diagram for exact location