Parts for Frigidaire FFHT1832TP0: Shelves Parts

The Freezer Shelf is an OEM replacement part for  Frigidaire freezers. It is a sturdy and durable wire or glass shelf designed to provide ample storage space within the freezer compartment, allowing you to organize and easily access frozen items. Measuring approximately 24-1/2" W x 12-1/2" D x 5/32" H, the shelf requires no hardware or tools for installation.

Causes of needing to replace a freezer shelf can include physical damage from impact or excessive force, warping or deformation due to temperature fluctuations or moisture over time, or general wear and tear from repeated use.

Symptoms of a bad freezer shelf include:

• Visible cracks or bends in the shelf material
• The shelf becoming loose or unstable, causing items to slide off
• Difficulty sliding the shelf in and out of its designated position

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This plate diffuser directs and evens refrigerator/freezer airflow to help maintain consistent temperatures and efficient cooling performance. It mounts inside the compartment and channels cold air where needed. What it does:

• Guides chilled air from the evaporator into the fresh-food or freezer section for improved circulation
• Helps reduce hot spots and uneven cooling inside the compartment
• Can prevent excessive frost buildup caused by disrupted airflow
• Restores proper venting when cracked or warped diffusers are blocking flow

• One plate diffuser

• Designed for simple replacement; remove the old diffuser and snap or screw the new piece into place
• Power off the appliance and unplug before doing any repairs
• Inspect surrounding vents and seals during replacement; replace any damaged fasteners

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator, making it easier to see and access food items.

Causes of a bad LED light bulb can include burnout from prolonged use, electrical surges, or damage from physical impact. Additionally, issues with the bulb's connection or internal circuitry can result in malfunction.

Symptoms of a bad LED light bulb include:

• The refrigerator interior remaining dark when the door is opened
• Flickering or dim light
• Intermittent lighting
• Complete failure to light up

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replacement refrigerator interior light socket that secures the interior lamp and connects it to the cabinet wiring, restoring reliable interior illumination. Use this when the light fails to come on, flickers, or the bulb sits loosely. What it does:

• Holds the interior lamp and provides the electrical connection for lighting
• Restores consistent contact to prevent flicker or intermittent operation
• Common repair for a light that won't turn on or a bulb that won't stay seated
• Fits into the interior housing to maintain proper lamp alignment

• Disconnect power to the appliance before inspecting or replacing the socket
• Remove the bulb before swapping the socket to avoid breakage or shock
• Inspect wiring and connectors for damage; replace if wiring is frayed
• Avoid getting the socket wet and use only the correct bulb type and wattage specified by the appliance

This temperature control knob replaces a worn or broken fridge temperature dial so you can set the refrigerator temperature accurately. It restores a solid grip and clear pointer for reliable, easy adjustments. What it does:

• Fits onto the temperature control shaft to select colder or warmer settings
• Provides a clear pointer for precise temperature selection
• Replaces cracked, stripped, or missing knobs that make adjustments difficult
• Helps eliminate loose or slipping knob operation

• One temperature control knob

• Push-fit installation onto the control shaft; no special tools typically required
• Ensure power is off and remove food before working in the appliance for safety
• Inspect the control shaft for damage; replace the control if the shaft is stripped

This heat shield protects the oven cavity and nearby components from excessive heat, helping prevent damage and maintain safe operation. It replaces a damaged or missing oven heat shield to restore proper thermal protection. What it does:

• Deflects and dissipates heat away from sensitive oven components and wiring
• Helps prevent heat-related discoloration, warping, or premature part failure
• Restores proper oven airflow and thermal shielding after a bent, rusted, or missing shield
• Useful when inner liner damage or excessive radiant heat is observed

• Disconnect power to the appliance before beginning service
• Handle sharp edges with gloves; use caution when working around metal panels
• Verify correct orientation and secure with original mounting screws or clips

This temperature control thermostat—often called the cold control—regulates your refrigerator's cooling by cycling the compressor based on the dial setting. Replace it to restore consistent temperatures and dependable start/stop operation.

• Senses compartment temperature via a capillary bulb and opens/closes contacts to control the compressor circuit
• Maintains the set temperature range in the fresh food section
• Can help resolve: refrigerator too warm or freezing food, unit runs constantly or won't start, temperatures not responding to knob adjustments
• Restores normal on/off cycling and more stable cooling performance

• Unplug the appliance before servicing
• Remove the control knob and cover to access the thermostat; note wire positions or take a photo before transfer
• Route the capillary sensing tube exactly as original; avoid kinks or sharp bends and secure in the same clips/locations
• After installation, set to a mid-range setting and allow up to 24 hours for temperatures to stabilize

The Defrost Timer is an OEM replacement part for Frigidaire refrigerators. Located within the control housing inside the fresh food section, it controls the defrost cycles to clear frost from the evaporator coils.

Causes of timer malfunction include: cracking/fatigue of plastics from extended usage; breakdown of delicate electronic components over many years of operation; and failures inhibiting regulated defrost intervals.

Symptoms of a failed defrost timer include:

• Refrigerator fails to automatically initiate scheduled defrost periods
• Frost/ice builds up excessively on evaporator coils obstructing airflow
• Erratic refrigerator temperatures as heat exchange degrades
• Refrigerator stuck in the defrost cycle
• Compressor is not running

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore ranges.

The Refrigerator Shelf is an OEM part for Frigidaire refrigerators. It is designed to provide a sturdy, flat surface inside the refrigerator compartment, offering a convenient space for storing and organizing food items. This shelf is made from materials that are designed to withstand the typical wear and tear of daily use, as well as the cold temperatures within the fridge.

Causes of a bad Refrigerator Shelf can include cracking due to excess weight, damage from sharp objects, or warping from exposure to extreme temperatures or moisture.

Symptoms of a bad Refrigerator Shelf include:

• Visible cracks or breaks in the shelf,
• Sagging or inability to hold items securely,
• Difficulty sliding the shelf in or out if it is designed to do so.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Shelf is an OEM part for Frigidaire refrigerators. It is designed to provide a sturdy, flat surface inside the refrigerator compartment, offering a convenient space for storing and organizing food items. This shelf is made from materials that are designed to withstand the typical wear and tear of daily use, as well as the cold temperatures within the fridge.

Causes of a bad Refrigerator Shelf can include cracking due to excess weight, damage from sharp objects, or warping from exposure to extreme temperatures or moisture.

Symptoms of a bad Refrigerator Shelf include:

• Visible cracks or breaks in the shelf,
• Sagging or inability to hold items securely,
• Difficulty sliding the shelf in or out if it is designed to do so.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Humidity Control Slide is an OEM part for Frigidaire refrigerators. This part regulates the humidity levels within the crisper drawers, helping to keep fruits and vegetables fresh for longer periods. The slide allows users to adjust the ventilation in the crisper, providing optimal storage conditions for different types of produce.

Causes of a bad humidity control slide can include regular wear and tear, accidental breakage, or misalignment that prevents it from moving smoothly.

Symptoms of a bad humidity control slide include:

• Difficulty adjusting the humidity settings
• The slide feeling loose or falling off
• Produce not staying fresh as long as expected
• Visible damage or cracks on the slide mechanism

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Frigidaire humidity control slide is an OEM replacement part responsible for regulating and adjusting the humidity levels within the crisper drawers of a refrigerator. This slide is found on the fresh food drawer to allow adjustment of the amount of moisture retained in the crisper drawers, which is essential for preserving the freshness and crispness of fruits and vegetables.

By adjusting the humidity control slide, users can create an ideal environment for different types of produce, ensuring that they stay fresh for longer periods and preventing food waste from wilting or drying out prematurely.

This part fixes the following symptoms

• Inability to adjust or control the humidity levels within the crisper drawers.
• Produce items wilting or drying out quickly due to improper humidity regulation.
• The control slide becoming loose, stuck, or difficult to move.

This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Refrigerator Crisper Drawer Cover is an OEM part for Frigidaire refrigerators, designed to offer a stable platform for the crisper drawers, providing organization and storage capacity. This part supports the crisper drawers and helps to maintain the ideal humidity level to keep fruits and vegetables fresh longer. 

Causes of a bad Refrigerator Crisper Drawer Cover can include cracks or breaks from heavy items being placed on top, warping due to temperature variations, or normal wear and tear over time.

Symptoms of a bad Refrigerator Crisper Drawer Cover include:

• Difficulty sliding the crisper drawers in and out.
• Visible cracks or damage leading to items falling through.
• A decrease in fruit and vegetable storage options.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Crisper Pan is an OEM replacement part for Frigidaire refrigerators. This high-quality crisper pan measures approximately 18 inches in length, 12 inches in width, and 8 inches in height. It is made of durable plastic material that is designed to withstand the rigors of everyday use. This crisper pan features a clear design that makes it easy to see the contents inside. It also has a humidity control feature that helps keep fruits and vegetables fresh for longer periods of time.

Symptoms of a failing Crisper Pan include:

• Cracks or breaks in the pan 
• Warping or damage that prevents the pan from sliding in and out  
• Scratches or cloudiness on the surface that impairs visibility  

Causes of a bad Crisper Pan can range from overloading it with too much weight, which can lead to cracks or warping, to normal wear and tear from sliding the pan in and out of the refrigerator. Accidental impacts, such as dropping the pan while cleaning, can also cause damage.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Meat Pan is an OEM part for Frigidaire refrigerators. This drawer is specifically designed to store meats and other perishables at an optimal temperature within your refrigerator. Its placement often allows for slightly different temperature conditions than the rest of the refrigerator, helping to keep meats fresher for longer. This bin measures approximately 18 inches long and 13 inches wide,

Symptoms of a failing meat pan include:

• Cracks or breaks in the pan that compromise its structural integrity
• Difficulty sliding the pan in and out due to damage or warping
• The pan not sealing properly, which can affect temperature regulation within the compartment

Causes of meat pan damage usually stem from overloading the drawer beyond its capacity, frequent and forceful use, or accidental damage from items being dropped on or in it.

This OEM part is compatible with Kenmore, Frigidaire, Crosley, Westinghouse, Electrolux, Kelvinator, and Gibson brands.

The Glass Shelf Insert is an OEM replacement part for Frigidaire refrigerators. It provides versatile storage space by allowing items to be viewed clearly and easily rearranged. This insert measures approximately  23.82 x 15.50 inches

Causes of a bad shelf insert may include cracks, chips or other damage due to repeated handling or excessive weight loads not suitable for glass. Normal wear over time can also affect the shelf surface.

Symptoms of issues include: 

• Visible damage detracting from shelf appearance and function
• Increased risk of items stored atop the shelf getting damaged 
• Difficulty cleaning due to cracks or irregular surfaces

This OEM replacement part is compatible with models by Electrolux, Kelvinator and Kenmore as well.

This grille clip is a small plastic retainer that secures a refrigerator grille or trim piece to the cabinet, keeping the front panels aligned and preventing rattles or gaps for a tidy appearance. What it does:

• Secures the lower/front grille or trim to the appliance cabinet to hold it in place
• Prevents grille movement, rattling, or sagging that can occur with worn clips
• Helps maintain a tight fit between trim and cabinet for a finished look
• Simple replacement part when existing clip is cracked, broken, or missing

• One grille clip

• Typically snaps into place; inspect mating slot and clip orientation before installing
• Replace any damaged adjacent clips for even support and fit
• Work carefully to avoid damaging the grille or surrounding trim

This is a replacement mounting screw used to secure the defrost timer assembly to the refrigerator control housing, restoring proper fastening and preventing the timer from shifting or vibrating during operation. What it does:

• Secures the defrost timer to the control housing so the timer stays in position.
• Prevents vibration or movement that can cause intermittent contact or noisy operation.
• Helps maintain reliable defrost cycle timing by keeping the timer properly aligned.
• Addresses symptoms such as a loose or missing fastener, rattling behind the control panel, or a timer that shifts when the door is opened.

• Unplug the appliance before starting work to prevent electrical shock.
• Access the control housing or timer bracket per your model's service instructions.
• Use the correct screwdriver or driver bit; do not overtighten—stop when snug to avoid stripping.
• Retain removed hardware for reference and compare screw length/threads before installing.

This refrigerator shelf spacer positions and supports a shelf so it sits secure and level. Replacing a worn or missing spacer helps eliminate wobble or shifting and restores proper fit and alignment inside the compartment. What it does

• Maintains correct spacing and alignment for the shelf
• Helps keep the shelf level and secure in its track or frame
• Replaces cracked, deformed, or missing spacers
• Symptoms can include a loose, tilted, or rattling shelf, or visible gaps where the shelf should seat

• One shelf spacer

• Disconnect power to the refrigerator before servicing
• Remove the shelf to access the spacer location
• Gently pry out the old spacer; avoid stressing plastic or glass components
• Press the new spacer firmly into place and reinstall the shelf, ensuring proper orientation