Parts for Wizard 13AI607H098 / 2000: Single Speed Transmission Assy Parts

This replacement part is a hex screw. This part is small but important in many different kinds of equipment. Hex screws are able to work with other small parts such as washers or nuts to ensure that components are secure within the equipment.Overtightened screws might be stripped and could fall out or get stuck in place, necessitating replacement. Over time, exposure to the elements may lead to a screw becoming worn or corroded, which may cause it to break or get stuck.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This ball detent is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a ball detent is to temporarily keep two parts in place relative to one another, as one or both of the parts rotate.A ball detent might have to be replaced in the event that it suffers damage over time or is lost or misplaced. It is possible for ball detents to fall out of their spot, meaning that the parts that it ordinarily holds in place will not be able to rotate properly. Additionally, a ball detent might have to be replaced if there is material deterioration. If this occurs, a replacement ball detent part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ball detent is compatible with the following brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

This replacement part is an input shaft for lawnmowers. The input shaft transfers torque from the clutch disk to the countershaft allowing for the lawnmower to switch gears. If the mower is no longer shifting properly, the input shaft might need to be replaced. Luckily replacing an input shaft is a relatively simple process.Before beginning, make sure that the mower engine has cooled. Open the hood cover, and locate the gearbox. Remove the mounting screws that attach the gearbox to the mower. Once removed, remove the gearbox and locate the damaged input shaft. Using a pipe wrench remove the old shaft by rotating it till it comes undone. Once removed, rethread the new input shaft into its proper position. Reattach the gearbox to the mower. After replacing, make sure to power the mower to see if the gears switch properly.This genuine OEM part is sold individually and is compatible with MTD brand lawnmowers.

This input pinion is a genuine MTD part, sold individually. An input pinion can be used as a replacement part in a lawn mower. This genuine OEM part facilitates the rotation of one or more components within the internal machinery of the appliance, and it is made out of durable, high quality metal material meant to withstand frequent exposure to the elements and long-term usage.The input pinion in a lawn mower might need to be replaced at some point within the typical lifespan of the appliance if it has been damaged. The input pinion could be chipped, scraped, cracked, dented, punctured, or eroded, and if this is the case, it should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This input pinion is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Yard Machines, Huskee, Montgomery Wards, Bolens, and Yard Man.

This replacement part is a transmission kit. This is a genuine replacement part made by MTD. This kit is used to assist the transmission and allow the part to work properly while the engine is in use. A new transmission kit might be needed if the engine is no longer starting as efficiently as before. This can be due to a worn down transmission and should be replaced. The transmission is a frequently used part in a machine and can easily become damaged after years of normal use. Refer to the proper user guide for more specific instructions on how to replace or repair this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This clutch collar is an authentic OEM part sourced directly from the manufacturer for use in lawnmowers and lawn tractors. If there are problems with the lawnmower jerking and sputtering after changing gears, the clutch collar should be removed and replaced to keep the lawnmower running properly. The clutch collar is part of the clutch bearing. The clutch collar is used between bevel gears as spacers and allows them to move in sync with the pinion gear. If the clutch collar is deteriorated, broken, or missing, a new one should be installed.Make sure the lawnmower is on a flat surface. Remove the spark plug and disconnect the battery. A screwdriver, pliers, socket set, wrench set, and nut driver are required to make this repair. Take the transmission out of the lawnmower. Open the case on the transmission and remove the broken clutch collar. Install the new clutch collar. Reverse the process to reassemble the lawnmower. This clutch collar is a high tensile metal part that is sold individually. It is designed for use in lawn tractors manufactured by Craftsman.

This is a part designed for a lawn mower. It is a single speed, complete transmission assembly that comes pre-greased in a sealed package. A mower transmission turns the engine, moving the mower back and forth, and provides a controlled application of power to the machine. The single speed transmission is responsible for moving the mower from 1 mph to whatever its top speed may be. This is an OEM part sourced directly from the manufacturer. It is sold individually.A single speed transmission is designed to deliver high torque output, have minimal transmission losses, minimum wear, and should operate smoothly. It is important to ensure that the fluids in the machine are checked regularly. Low transmission fluid is one of the most common causes of a slipping transmission. Unless properly maintained, the single speed transmission will perform poorly or stop working altogether which will result in it needing to be replaced.This part is compatible with lawn tractors, pedal drive lawn tractors, and automatic lawn tractors from MTD, Craftsman, Troy-Bilt, Yard Machines, and Husky.