Snow Champ Lawn Mower Parts

The torsion spring is designed to create tension between various components in lawn and garden equipment engines. This spring may have multiple applications depending on the type of machine. The torsion spring typically connects levers and other things that need pressure to operate properly. They create torque and help support various items in lawn and garden machines. Over time, they can become worn or the springs can stretch or snap. This will require a replacement of the entire spring, since the unit will typically not be able to function without a properly working torsion spring. This genuine OEM replacement spring is manufactured to exact standards by MTD. This part can be found in hundreds of models from MTD, Yard Machines, Cub Cadet, Troy-Bilt, Husky, Bolens, and Yard-Man. Check the parts diagrams and equipment manual for the exact location and application of this torsion spring. This high-quality spring is made of metal and is sold as an individual unit. Always wear gloves when performing repairs on lawn and garden machines. Beware of pinching and crushing injuries when working with springs, which are typically under a lot of pressure.

This replacement part is a hex screw. This part is small but important in many different kinds of machinery. Screws secure components within the equipment.Over time, screws can become stripped or corroded, causing them to break or get stuck in place. Excessive vibration during the use could also eventually lead to a screw coming loose and being lost.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This snow thrower track is a genuine OEM part sourced directly from the manufacturer for use on snow throwers that are track-driven. Tracks used on snowthrowers provide more traction than wheels and are better for steep inclines. These tracks roll over a shaft and propel the machine forward, like an army tank. Over time and with heavy use, the tracks may become damaged and need to be replaced. If one track is damaged, inspect both before ordering. These are sold individually, and it is best to have both on hand when doing repairs.Before replacing the track bracket, remove the spark plug and empty the gas from the snowblower. Wear safety gloves and safety glasses. Jack the snow thrower up on the side that is being repaired. Remove the nuts holding the track on the shafts to loosen it. Remove the track and put the new one. Ensure the track is on straight and tight. Tighten the nuts. Reinstall the fuel and spark plug.This snow thrower track is a black rubber part that is sold individually. It is designed for use in snow throwers manufactured by Craftsman and MTD.

This replacement part is a center sprocket. This is a genuine replacement part made by MTD. This part is used to connect certain pieces and use a turning or rotating mechanism to allow the engine to run properly and effectively. A new center sprocket might be needed if the current one has worn ridges. This can be due to a high level of friction after years of normal wear and tear. Because of the rotating motion, this part can be easily stripped over time and will need to be replaced. Wear work gloves during this repair to prevent injury to the user and those around them. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

An idler pulley is an essential part of many small and medium sized gasoline powered tools. This idler pulley is used in equipment such as tillers, lawn tractors, log splitters, edgers, snow blowers, and trimmers. The idler pulley is necessary so that the engine can run without the tool's moving parts being engaged. For instance, a lawn tractor running without the cutting blades turning or the wheels rolling. Once the idler pulley is engaged, the blade begins to turn. There is a great deal of resistance encountered by the idler pulley each time the equipment's tools begin to turn. Over time, the pulley can become worn and will eventually need to be replaced. If there is a squealing sound whenever the moving parts of a lawn tool are engaged, it is probably a sign that the idler pulley is about to fail. The pulley itself is attached to the engine housing with 9/16 hex bolts and requires an adjustable wrench and 9/16 ratchet to remove and replace. Always use a genuine OEM manufactured replacement part such as this one when replacing the original, as this part is identical to the original. This part is compatible with equipment manufactured by Bolens, MTD, Cub Cadet, Huskee, and Troy Bilt.