Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This part is discontinued by the manufacturer and is no longer available for purchase.
The cylinder head gasket sits between the cylinder head and the engine block. It has seals that allow the internal combustion process to occur, while also ensuring that coolant and oil do not blend as they leave the engine block and go to the head. This repair will require the use of wrenches, screwdrivers, pliers, and other equipment, and it will be necessary to purchase any other components in need of replacement at the time of the repair. This OEM cylinder head gasket replacement is a part for engines on lawn mowers, pressure washers, chipper and shredders, as well as other gas-powered devices from Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, Simplicity, and other manufacturers.
This genuine replacement crankcase gasket creates an airtight seal on the crankcase so that oil and air do not leak out of the engine when it is running. Over time, this gasket is exposed to extreme pressure and high heat and will naturally deteriorate. It could become faulty and create leaks or it could break entirely. In either case, a full replacement of the gasket is the only solution. This OEM part can provide an exact fit for compatible lawn and garden equipment engines. This genuine crankcase gasket is manufactured to strict standards by Briggs & Stratton and is compatible with select engines on lawn mowers and generators from Briggs & Stratton, Lawn Boy, and Toro. This gasket is made of durable composite material and it is sold as an individual unit. Other gaskets, hardware, or related parts are all sold separately. The repair can be done with just a wrench, but be sure to allow the engine to cool entirely before beginning any repairs. Always wear gloves and disengage the spark plug for safety when performing engine work.
This genuine Midwest Engine screw can be used as a replacement part for a variety of outdoor lawn and garden appliances including lawn mowers, snowblowers, tillers, pressure washers, generators, leaf blowers, edgers, and wood chippers. A screw might have to be replaced within the lifespan of one of these types of outdoor appliances. Tthis is a common occurrence as screws are small components that are easily lost and misplaced. Screws can also loosen over time, necessitating a replacement. If this is the case, the screw should be replaced with this OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, Simplicity, and MasterCut.
This facia panel is the outer trim for the appliance's control area, restoring the finished look and protecting the underlying control components. It gives a clean appearance and helps keep controls secure and covered. What it does:
This screw is a genuine Midwest Engine replacement part for small engine appliances, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to tightly link materials together through rotation that pierces into the material. A screw might have to be replaced in the event that it is lost or misplaced, a common occurrence due to its size. A screw might also be replaced if it deteriorates over time, through erosion, cracking, or piercing, thereby reducing its efficacy in holding materials together. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately, as the materials held together by the screw must continue to be held together. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: Briggs & Stratton, Toro, Cub Cadet, and Lawn Boy.
This valve retainer is an authentic replacement part for use with many types of small lawn and garden engines. The retainer valve helps to keep the lock valve spring on the valve. It is shaped similarly to a washer, which will fit over the top of the valve spring. The piece also helps to add space between the valve spring and the head of the valve. The valve retainer is made from metal, and it is a small piece. The retainer could become lost and need replacement when performing other maintenance on the engine's valves. The metal could also become corroded or break. In those cases, it will need to be replaced as soon as possible. This is a genuine OEM replacement part that is sold individually. The part can be used with many types of equipment including lawn mowers, snowblowers, tillers, pressure washers, edgers, leaf blowers, log splitters, and wood chippers. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, MTD, Simplicity.
This OEM starter grip is a replacement for select Briggs & Stratton engines. The starter rope grip provides the handle that is used to pull the starter rope. When it is pulled, the starter recoil spring engages the flywheel puller, which then causes the flywheel to rotate and starts the rotation of the blade as the engine fires. The starter rope grip is made of durable plastic but it can become damaged or cracked over time. If it is broken, the rope will be unable to be pulled to engage the engine until the part is replaced. This is a genuine starter grip designed to work with a variety of lawn and garden equipment that features a Briggs & Stratton engine with a pull-start. The starter grip is sold in two pieces with the grip and a cap that snaps on once the rope has been tied inside of the handle to secure it in place. The unit is sold individually. This item does not include the rope or any additional parts.
This is a replacement screw that can be used on various types of lawn and garden equipment. The type of equipment will affect where the screw is used on the tool. A screw is used to attach various components together so nothing comes loose while the tool is in use. It can also be used with a nut. It's best to choose a nut that has the same finish and threading as the screw.A screw can be damaged in many ways. If this occurs, it will need to be replaced. Corrosion, wear and tear, extreme stress, and high temperatures can all cause a screw to fail. Inspecting the screw can indicate whether it will need to be replaced. Use a screwdriver to take off the old screw, or use a pair of pliers if the screw has become stripped. Replace it with a new screw.This is an authentic OEM replacement part sourced directly from the manufacturer. Each screw is sold individually. The component is designed for use with lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, edgers, chainsaws, generators, and wood chippers manufactured by Briggs & Stratton, Simplicity, Toro, MTD, Cub Cadet, Lawn-Boy, Homelite, and Murray.
Flange screws have a flange located near the top of the screw, which helps to distribute the connection force over a larger area to reduce potential damage to the machine. It also allows the screws to be used in oversized or irregular holes, and it helps to ensure they stay in place. This flange screw also has a hex top. Screws can last for a long time. However, they may become corroded or worn over time and need to be replaced. They could also become lost and need a replacement. Without all of the screws in the proper places in a machine, it could vibrate too much, which could render it less effective or unsafe to use. The flange screw is a genuine OEM part that can be used with many types of machines including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, generators, wood chippers, and other small engines. The screws are compatible with Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, Simplicity, and MTD.
This is a carburetor overhaul kit for 3.5 to 4 HP Max Series Quantum and 5 HP Industrial Plus Engines. It is secured to the side or top of a lawnmower engine, depending on the manufacturer. The carburetor is crucial to the overall performance of an engine because it is responsible for mixing the right amounts of air and fuel. The fuel from the fuel tank flows through a hose into the carburetor, which allows it to drip into a bowl. The carburetor can become dirty or clogged over time for a variety of reasons. When this happens, it is often a good idea to take it apart and replace the components inside. There are other telltale signs that the carburetor needs an overhaul or repair. These include an engine that won't start, an engine that's running lean, an engine that's running rich, and one that's flooded. This high-quality carburetor overhaul kit comes with everything needed to repair or rebuild a carburetor, including gaskets, needle, float, seals, and an instruction manual. Aside from lawnmowers, it works with specific models of leaf blower/vacuums, generators, pressure washers, wood chippers, and small engines from Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, MTD, Murray, Simplicity, and Toro. It is an OEM product sourced directly from the manufacturer and is sold individually. Please refer to the diagram of the specific model for the correct location and application of the components.
The carburetor float is housed in the carburetor and is used to help control the fuel flow. It adjusts the needle valve and ensures that the appropriate amount of fuel reaches the carburetor bowl. This helps provide the right mixture of air and gasoline for the engine to operate at optimal performance. Over time, the float can become worn or detached, or the pin could come loose. When this happens, the flow is affected, and the engine will not operate correctly. If the float isn't working correctly on a lawnmower or another small engine, it might be time for a replacement. This replacement part is a genuine OEM product designed to be used with many Briggs & Stratton engines, including lawnmowers, pressure washers, generators, and other lawn and outdoor equipment engines. It is sold as a single unit with the metal cotter pin included. There are more than 150 compatible machines that this unit will work with. If your lawnmower isn’t working as it should or if the float has come loose and can't control the flow appropriately, this OEM replacement can get things back in working order.
This fan belt transfers motor power to the appliance fan so the fan can move air as designed. Replacing a worn or broken belt restores proper airflow and helps reduce noise or overheating from reduced circulation. What it does:
This genuine Briggs & Stratton governor link can be used as a replacement part for appliances operated by small engines, including lawn tractors, lawnmowers, snowblowers, leaf blowers, vacuums, tillers, and generators. The function of a governor link on a small engine appliance is to set the throttle to run at a steady speed. A governor link might have to be replaced if it withstands enough damage to prevent the governor link from keeping the throttle running and keeping the rest of the engine's governor assembly in place. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor link is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, and Simplicity. This part is sold individually.
The choke return spring is a part that is used on many small engines in lawn and garden equipment. The part is a component in the choke system that ensures that the correct tension is applied to keep the choke lever in the appropriate position. If the choke return spring is broken or begins to malfunction, the lawnmower may have issues keeping power and running correctly.If the choke return spring is damaged or weak, it will prevent the choke from returning to the correct position. This can cause the engine to speed up and accelerate more quickly than desired. The air filter housing will need to be unscrewed to access the choke return spring. Take the wire off the spark plug and remove the boot from the plug. Remove the spring from the linkage and then clip on the new one. Replace the other components to get the equipment to work again.This choke return spring is an authentic OEM replacement part directly sourced from the manufacturer. It is sold individually. The spring is compatible with various wood chippers, lawnmowers, and pressure washers by Briggs and Stratton, Simplicity, Toro, Lawn-Boy, and Cub Cadet.
This fuel filter is a genuine MTD part, sold individually. This fuel filter can be used as a replacement part for lawn mowers, snowblowers, pressure washers, generators, tillers, log splitters, lawn tractors, and wood chippers. The purpose of the fuel filter is to prevent the accumulation of external materials such as dirt, debris, and pebbles from entering the fuel line.If the fuel filter is punctured, torn, scraped, or eroded to the point that external materials can pass through it and enter the fuel line and the fuel tank, the component must be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel filter is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Toro, Cub Cadet, Murray, Wheel Horse, Lawn Boy, Snapper, and Simplicity.
The muffler on a lawn or garden machine is meant to cut down on the amount of noise that comes from the engine. It will also prevent sparks from the exhaust system from igniting materials beneath the machine (such as dried grass or other debris). A muffler can wear out after only a few seasons because of the amount of use, the level of dried soot from the engine, and from any holes or cracks that can form in the housing or hoses. This OEM replacement muffler works on a long list of brands of lawn and garden machines, including those from Briggs & Stratton, Cub Cadet, Toro, and Simplicity. It will work with an array of small engines, pressure washers, chippers, and lawn mowers. It ships as a full replacement, including gasket and bolts as well as muffler assembly.
This blower housing is a genuine Midwest Engine part, sold individually. This blower housing can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, pressure washers, leaf blowers, generators, and wood chippers. The purpose of the blower housing is to provide the internal combustion engine with a means of channeling and regulating the intake of air, which mixes with fuel to ignite the spark plugs and power on the engine. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This blower housing is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Toro, and Simplicity.
This part has been discontinued by the manufacturer and is no longer available.
This is a screw that is used in many types of lawn and garden equipment, including lawnmowers and wood chippers. It comes with a black finish and is made of durable metal. The screw can be used in many locations on a tool to attach two components together. Screws can also be used in tandem with nuts, but the two components should have the same threading and finish.Screws can become damaged, break, or be stripped and will need to be replaced. Corrosion, extreme temperatures, and unexpected stress can all lead to issues with a screw. A visual inspection can indicate whether the screw should be replaced. If it does need replacement, a screwdriver can be used to remove the original screw. The new component can be placed and tightened.This screw is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as a single component. The screw can be used with many types of lawn and garden equipment, including lawnmowers, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and snowblowers manufactured by Briggs & Stratton, Cub Cadet, Craftsman, Murray, Wheel Horse, Lawn-Boy, MTD, MasterCut, Simplicity, and Toro.
This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.
The pawl friction plate on lawn and garden engines is an essential part of the starter assembly that is needed to crank start the machine. It provides power to the starter cup. If the engine on a machine will not start, it could be due to a broken or worn pawl friction plate. Replace the plate immediately to ensure your machine is working properly. This is genuine OEM part is compatible with a range of product types, including lawnmowers, snowblowers, tillers, pressure washers, generators, log splitters, wood chippers, leaf blowers, and chippers. Compatible brands include Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, Snapper, Simplicity, and Toro. The part is sold individually. Keep in mind that this only includes the pawl friction plate. It does not contain the screw or spring, and these will need to be purchased separately.
The breather tube is responsible for filtering out exhaust gases from the crankcase. It has special fibers in the tube to remove contaminants as it moves the exhaust gases through the ventilation valve and out into the air. The tube also helps ensure that the engine air stays cool for optimal performance. This rubber tube can become dry and cracked over time, or it could be damaged due to an incident or impact. In any case, the tube should be fully replaced when it is not functional to ensure optimal performance at all times. This genuine OEM breather tube is manufactured to exact standards and made by Briggs and Stratton. It is compatible with select engines on more than 150 lawn mowers and generators from Toro, Briggs & Stratton, and Lawn Boy. This replacement tube is made of high-quality materials and sold as an individual part. No hardware or other parts are included with the purchase. This part should only be replaced once the engine is cool and all work should be done in a well-ventilated area. A screwdriver and socket set will be required to replace this part.
This is a replacement screw to secure the pawl friction plate used in many types of lawn and garden equipment. The part is also sometimes called a flange bolt. It is identical to the original screw that came with the machine and will replace a lost or damaged screw. The screws could become damaged due to corrosion or an incident that causes the screw to bend or break. They also serve as replacements in case the screw was lost. Replacing the screw is a simple repair to make. This is an authentic OEM replacement screw that is sold individually. Some buyers might want to have an extra screw on hand. The replacement screw for the pawl friction plate can be used on lawn mowers, snowblowers, tillers, pressure washers, generators, edgers, log splitters, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.
The stop switch, sometimes called a kill switch, is triggered to stop the engine when the operator is no longer on the seat ,This is important for safety. If the stop switch is not functioning properly, inspect it for damage and replace it right away. Operating a machine without a functional stop switch can be dangerous. The stop switch is a genuine OEM part, and it is sold individually. The switch can work for many types of equipment including lawn tractors, lawnmowers, log splitters, wood chippers, pressure washers, and tillers. The replacement part is compatible with a range of brands, including Midwest Engine, Toro, Craftsman, Briggs & Stratton, Lawn-Boy, Murray, Snapper, and MTD.
This replacement friction spring is a genuine OEM part meant for any number of small appliance engines run using a starter rope. This spring absorbs large amounts of kinetic energy that could damage the starter rope pulley system. It helps keep the pulley from being overstretched, which would create enough pressure to break the entire system. This spring sits at the center of the pulley system and creates resistance as the user yanks the starter rope. Friction springs can become worn out after repeated use, especially if a user tends to yank the starter rope quite forcefully. The most obvious sign of a worn of friction spring is if the pulley system lacks any resistance. As the user pulls the cord, they should feel a little pull back, but if the friction spring is worn, there will be much less resistance. Replacing this part is straightforward and will only require a screwdriver. Simply open the pulley system, carefully remove the old spring, and install the new one. This part is compatible with a wide number of appliances from Toro, Vanguard, Briggs & Stratton, and Lawnboy. It comes sourced from the original manufacturer and ships individually.
This exhaust gasket is a genuine Midwest Engine replacement part for appliances operated by small engines, such as chipper shredders, snowblowers, leaf blowers, and lawn mowers. An exhaust gasket's purpose in the engine is to create a sealed layer between the carburetor and the exhaust tube to keep dirt and debris out of the infrastructure of the engine. A malfunctioning or broken exhaust gasket could compromise the seal between the carburetor and the exhaust tube, meaning that dirt and debris could get into the engine and cause damage. An exhaust gasket could be subject to damage from overuse and is generally known to require replacement over time from general wear and tear. If the exhaust gasket seal is compromised, it should be replaced immediately. Evidence of dirt and debris compromising an engine could take the form of oil leaking from the carburetor, black smoke pluming from the exhaust tube, and lower engine pressure than usual. This exhaust gasket is compatible with the following brands: Briggs and Stratton, Cub Cadet, and Toro. This part sold individually.
This OEM air cleaner cover from Briggs & Stratton fits over the air cleaner and filter system, protecting the filters from excess dirt, debris, and other potential damage. This cover is also designed to help hold the air filter in place. The plastic housing is durable, but it can be subject to damage over time. This replacement is a snap-on cover, so no tools are required. Be sure to wear gloves when performing any kind of work on lawn and garden equipment. This air cleaner cover is designed to work with multiple types of lawn and garden equipment from Briggs & Stratton, Lawn-Boy, and Toro. It works with various engines on generators and lawnmowers, including hundreds of different specific models. It is sold individually and does not include the actual air filter or the bottom part of the housing.
This genuine Midwest Enginescrew can be used as a replacement part for appliances operated by small engines, including lawn tractors, lawnmowers, snowblowers, leaf blowers, vacuums, tillers, and pressure washers. The function of a screw on a small engine appliance is to fasten materials together through rotating such that the screw pierces into the materials to attach them. There are several reasons why a screw might have to be replaced. As they are a small part, screws might have to be replaced if they are lost or misplaced. These misplacements are a common occurrence for owners of small engine appliances while they do repairs. Additionally, screws may suffer damage over time in the form of rusting, stripping, erosion, or other deterioration and should be replaced if the damage hampers their ability to keep materials fastened to each other. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This OEM screw is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, and Snapper. This part is sold individually.