Parts for Craftsman 917250842: Steering Parts

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This steering shaft is a genuine Husqvarna replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a steering shaft is to connect the steering wheel to the steering gearbox. This allows the wheels of the small engine appliance to turn smoothly.A steering shaft might have to be replaced in the event that it suffers damage over time; this could be a result of regularly steering through uneven and irregular terrain or of turning the steering wheel too far in either direction too often, which can be overwhelming to the gears. Additionally, a steering shaft might have to be replaced if there is material deterioration over time. If this occurs, a replacement steering shaft part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This steering shaft is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This steering shaft adapter is a genuine Husqvarna replacement part for lawn mowers and lawn tractors. The function of a steering shaft adapter is to affix the steering shaft to the steering wheel.Steering shaft adapters can suffer damage from general overuse, exposure, or age, which is likely within the lifespan of a tractor or mower; they can also be damaged in the process of trying to reach surrounding parts for maintenance, such as changing the bushings. Damage to the steering shaft adapter might result in the inability of the front wheels to turn properly. If the front wheels are not turning and other simpler remedies are not solving the issue, the steering shaft adapter should be replaced immediately. The lawn tractor or lawn mower should not be used until the adapter is replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This steering shaft adapter is compatible with the following lawn mower and lawn tractor brands: Husqvarna and Poulan. This part sold individually.

This part is a replacement steering shaft bearing kit. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current steering shaft bearings are broken, faulty, or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The steering shaft bearing kit provides support for the steering shaft and the steer plate. The bearings may become corroded or worn over time, necessitating replacement. Proper tools such as a socket and wrench set are required to install this part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this steering shaft bearing kit, the appropriate owner's manual and equipment diagrams should be referred to. This bearing kit is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a lawn mower. The purpose of the screw in a lawn mower is to serve as a small fastening component within the internal mechanisms of the appliance, holding components together and in place.The screw in a lawn mower is a small component that can be easily misplaced, lost, or stripped away during the typical lifespan of the appliance. The screw can be stripped away due to general wear and tear from long-term use or as the result of collision with a hard object so as a curb, a rock, or a landscaping block. If this occurs, the screw should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.