Parts for Dixon 115148427: Steering Parts

This flange bearing is a genuine Husqvarna part, sold individually. This flange bearing can be used as a replacement part in a lawn mower. The purpose of the flange bearing in a lawn mower is to manage both radial and axial loads by maintaining two rings that rotate in different manners to facilitate different ranges of motion within the appliance.The flange bearing in a lawn mower might have to be completely replaced if the flange bearing cannot perform its critical function due to damage from general wear and tear or as the result of an accidental collision with a hard object. If the flange bearing is dented, punctured, torn, eroded, warped, or damaged, the flange bearing should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This flange bearing is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

Husqvarna brand Pivot Section Drive Control/Pivot Bar

This bolt is a genuine Husqvarna part, sold individually. This bolt can be used as a replacement part in a lawnmower. The purpose of the bolt in a lawnmower is to serve as a fastening component, in conjunction with a nut, so that the placement of one or more components can be ensured while the appliance is in operation.The bolt in a lawnmower might have to be replaced if the bolt is subject to stripping or wearing away over time as a result of general wear and tear from long-term use. The bolt can also be lost or misplaced while the appliance is in operation, in which case the bolt should be replaced by this genuine OEM replacement part. It is a simple replacement that will require only basic tools to properly execute. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This bolt is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This is a single washer for use with an assortment of lawn and garden equipment. The location of the washer will vary by tool and model. It's made of durable metal and can be used to distribute pressure across another component or can be used to add spacing between two parts. Since washers are small and experience a great deal of pressure, they can become damaged or even lost. If this occurs, other parts will make contact and pressure may not be appropriately distributed in a piece of lawn and garden equipment. If a replacement is needed, locate the area with the washer. Disassemble as needed to visually inspect the part. The washer can be removed by hand or with the help of a flathead screwdriver to pry it up. Replace the original washer with the replacement part and reassemble the equipment. The washer is priced as a single unit and is directly sourced from the manufacturer. It is an authentic OEM replacement component. It's compatible with a variety of string trimmers, tillers, snowblowers, and lawn mowers manufactured by Weed Eater, Husqvarna, and Craftsman.

This shock absorber is a genuine Husqvarna part, sold individually. This shock absorber can be used as a replacement part in a lawn mower. The purpose of the shock absorber in a lawn mower is to prevent excessive motion and vibration from the steering lever so that oversteering is avoided while the lawn mower is in operation.The shock absorber in a lawn mower might need to be replaced at some point within the typical lifespan of the appliance. If the shock absorber cannot function, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shock absorber is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Jonsered, and Craftsman.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower. The purpose of a nut in a lawn mower is to serve as a small fastening component used in conjunction with a bolt.The nut in a lawn mower can be easily lost, misplaced, or stripped away from general wear and tear with long-term use or as the result of a collision with a hard object such as a rock or a curb. The nut could be dented, punctured, scraped, cracked, chipped, or otherwise damaged to the point that it loosens from its placement and cannot be secured. If this occurs, the nut should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This part is a replacement hex bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or misplaced hex bolt in several types of power equipment.The hex bolt gets its name from its hexagon shape and is a standard piece of hardware with many different uses. Bolts are important for securely holding equipment together but can become stripped, corroded, lost, or otherwise defective over time, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex bolt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This hex bolt can be used with small engine power equipment that has been manufactured by Husqvarna, Poulan, and other brands. Sold individually.

This is a steering lever assembly with grip that is used with a variety of lawnmowers and lawn tractors. The lever is located where the user puts their hands while using the lawn and garden equipment. It's made of metal and has a foam grip for comfort. The purpose of the steering lever assembly is to help the user control the direction and speed of the lawnmower while it is in use. The component can be damaged or lost and will need to be replaced to operate the mower.When replacing this part, a wrench and a pair of work gloves will be required. The lawnmower should be turned off and placed on a level surface while making the repair. Disconnect the spark plug wire to prevent the engine from turning on during the replacement. Access the lever assembly and use the wrench to remove it from the lawn equipment. Replace with the replacement part before use.This part is sold individually. It is made to be compatible with many lawnmowers and lawn tractors manufactured by Husqvarna, Poulan, and Craftsman. The steering lever assembly with grip is a genuine OEM replacement part that is sourced directly from the manufacturer.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. This particular spring is found in different types of lawn mowers and provides torque and other energy so that the engine works properly and efficiently. A new spring might be needed if the current one is missing or damaged in any way. It is common that they are put under too much pressure and can snap and need to be replaced. It is recommended that working gloves be worn since these parts can be dangerous to those handling them. Be sure to reference the appropriate user guide for more instructions on how to replace this part.This part is sold as a single piece. This spring is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure proper fit and long lasting use.