Parts for Husqvarna 502140: Steering Parts

This is a left-hand weldment spindle that is intended for use with lawn tractors. This part attaches the front wheel to the axle. If this part is damaged, it could cause a range of problems for the tractor. The wheel might stick and not move, which would render the tractor useless. It might also mean that the wheel is unstable or that it wobbles. This could make the tractor inefficient at best and dangerous at worst. If there is damage, replace the weldment right away.The weldment is made from durable metal. It is built to last. However, it may still need to be replaced at some point. If it is bent due to an accident, or if parts of it begin to corrode, replace it.This left-hand weldment spindle replacement will work for certain models of lawn tractors from Husqvarna and Craftsman. The piece is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This replacement part is a tractor spindle and is intended for use in a variety of lawn equipment, including tractors. This is a genuine replacement part made by Husqvarna. Spindles are important to many different types of machinery and are responsible for allowing things inside the machine to turn or spin properly. A new spindle might be needed if the user can hear a buzzing or vibrating noise coming from the inside of the machine. This means that the spindle may be damaged and not working properly. It is common that spindles become stripped overtime due to normal wear and tear as they are used very frequently inside the machine. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

Here is a replacement thrust washer that can be used in lawn mowers. A thrust washer is a type of flat washer that is used between a stationary component and a surface that rotates, and they are used for a range of applications, not just for engines. The thrust washer is made from metal and it is durable. However, there may be a time when one or more thrust washers need to be replaced. This might be due to corrosion or damage to the washer. It could also result from the thrust washer becoming lost when the owner is working on the machine. Many buyers will choose to purchase several thrust washers at once so they can have them on hand if they need them in the future. The genuine OEM replacement thrust washer is sold individually. This washer can be used in various models of lawn mower and lawn tractor. It is compatible with more than 150 models. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Murray, and Ariens.

A flat washer is used in conjunction with threaded screws or bolts. Before inserting and fastening a bolt into the surface, the fastener is inserted through its end. This is a typical application of washers because they distribute the fastener's load. It also helps with heat and friction reduction as the fastener is tightened. In some implementations, a flat washer also works as a spacer, as well as additional electrical insulation. A flat washer is made from metal. However, it can break down. One of the warning signs of a bad washer is that it doesn't have its distinct circular shape, appearing bent or cut in half. Replacing a flat washer is easy, however, and only requires a screwdriver or socket wrench (depending on the type of fastener). Loosen and remove the fastener. Then, take the broken fastener out. Insert the new flat washer into the fastener. Then, screw the fastener back. This flat washer is an original Husqvarna product. It is made for lawnmower models manufactured by Craftsman, Murray, Husqvarna, Ariens, Poulan, and Weed Eater. It is made of metal and is sold individually. Fasteners are not included.

This split lock 3/8 washer can be used in a variety of lawn and garden tools. It functions as a component that prevents nuts and bolts from loosening due to vibration when a tool is in use. It’s a split ring with a helical shape, and when fastened together, it exerts a force on the fastener for resistance to motion and increased friction. Typically, this washer is attached on the nut side of a fastener. Over time, the split lock 3/8 washer can start to wear, degrade, or fall apart. This leads to a need for replacement in order to keep the other tool components in the best shape. A flathead screwdriver can be used to pry the washer loose from the bottom or from the split in the washer. Tools needed might include ratchets, wrenches, and a screwdriver. This is a genuine OEM washer known as a 3/8 lock or 3/8 split lock washer and comes as an individual item. It’s gold in color and made out of metal. It can be used for lawnmowers, snowblowers, string trimmers, tillers, wood chippers, and edgers by Husqvarna, Craftsman, Ryobi, Poulan, Weed Eater, Ariens, Murray, and Dixon.

This steering shaft is a genuine Husqvarna replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a steering shaft is to connect the steering wheel to the steering gearbox. This allows the wheels of the small engine appliance to turn smoothly.A steering shaft might have to be replaced in the event that it suffers damage over time; this could be a result of regularly steering through uneven and irregular terrain or of turning the steering wheel too far in either direction too often, which can be overwhelming to the gears. Additionally, a steering shaft might have to be replaced if there is material deterioration over time. If this occurs, a replacement steering shaft part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This steering shaft is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This part is a replacement steering shaft bearing kit. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current steering shaft bearings are broken, faulty, or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The steering shaft bearing kit provides support for the steering shaft and the steer plate. The bearings may become corroded or worn over time, necessitating replacement. Proper tools such as a socket and wrench set are required to install this part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this steering shaft bearing kit, the appropriate owner's manual and equipment diagrams should be referred to. This bearing kit is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

The gear sector will be a replacement for certain lawn tractor models and riding mowers. The gear sector attaches to the steer plate using a bolt and a washer. The purpose of the gear sector is to help pivot the wheels in different directions. If there is a problem with the part, it can be more difficult to turn and operate the machine properly. Replace the part as soon as possible to ensure the efficiency of the machine.Over time the teeth on the gear sector might start to wear down, which will require a replacement. There is also the chance of the item being bent, corroded, or otherwise damaged. Replacement for the piece is not too difficult. A wrench is needed to complete the install. Ensure the mower or tractor is on a flat surface, powered down and completely cool before starting any work.This gear sector will work as a replacement for some tractor models and riding mowers from Husqvarna, Poulan, Weed Eater, and Jonsered. The part is sold individually and has been sourced from the manufacturer as a genuine OEM replacement part.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This replacement part is a flange nut. This is a genuine replacement part made by Husqvarna. This part is small but important in many types of machinery and appliances. Flange nuts work with other small parts to keep things secure and in place during use. A new flange nut might be needed if the current one is missing or damaged in any way. It is possible that the nut becomes stripped or worn down over time and should be replaced. Be sure the engine is completely powered down before replacing any part. This should be a simple repair and only require common household tools such as a screwdriver or pliers. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure a proper fit and long-lasting use.

This drag link is part of the drive mechanism. It connects the spindle and the sector gear, helping to steer the mower in the appropriate direction when the steering controls are engaged. Over time, this part is subject to constant friction, vibration and repetitive motion, which can cause wear and damage. A replacement may be needed if the part becomes too damaged to function or breaks entirely. This genuine OEM drag link is manufactured by Husqvarna and made to exact standards. It is compatible with select lawn mowers from Craftsman and Husqvarna. It is made of durable metal and requires a wrench to replace. This drag link is sold as an individual unit. Hardware and other parts of the steering assembly are not included and will require a separate purchase. Always wear gloves when performing repairs on lawn equipment. Allow the engine to cool completely before doing any work.

This drag link is a genuine Husqvarna replacement part for lawn mowers, though drag links are found in most small engine operated appliances with steering features, such as lawn tractors, snowblowers, and chipper shredders. The function of a drag link is to link the steering gearbox to the tie rod ends.A drag link might have to be replaced in the event that it suffers damage over time. Symptoms of an overused or damaged drag link could include drifting steering requiring the lawn mower or other small engine appliance to be constantly steered and supervised, a loose steering wheel or abnormal shimmy from the wheel, or inordinate and uneven stress that is visually noticeable on the tires. If any of these symptoms occur, a replacement drag link part should be ordered and secured to the small engine appliance immediately to mitigate any possible further damage to the appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This drag link is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This replacement part is a steering shaft and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. The steering shaft is a large rod that assists the user in being able to steer the device. This is commonly found in lawn mowers. The steering shaft is an important part of the mower as it controls the movement of the machinery. A new steering shaft might be needed if the current one is misplaced from the device or not working at all. It's possible that the steering shaft can become damaged or worn down after many years of normal use. In this case, it is best to replace the part as soon as possible.Be sure to reference the owner's manual for specific instructions on how to replace this part. This steering shaft is sold individually and is a genuine OEM replacement part.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a lawn mower. The purpose of the screw in a lawn mower is to serve as a small fastening component within the internal mechanisms of the appliance, holding components together and in place.The screw in a lawn mower is a small component that can be easily misplaced, lost, or stripped away during the typical lifespan of the appliance. The screw can be stripped away due to general wear and tear from long-term use or as the result of collision with a hard object so as a curb, a rock, or a landscaping block. If this occurs, the screw should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This is a thrust washer that can be used as a replacement for the washers in many models of lawn and garden equipment. The thrust washers are flat and are used to ensure that there is no extra space between pieces connected in the machine. The tight fit can help to reduce vibration and prolong the life of the pieces that are being connected. If the washers are missing or have been damaged, it could result in added vibration and sound from the machine.The metal washers tend to be durable. However, they may still need to be replaced. Over time, they could wear down or become corroded. Other times, they might be lost when working on the machine. The replacement is easy.The thrust washer can work in a range of machines including riding mowers, tillers, and tractors from Craftsman and Husqvarna. Each washer is sold individually. Owners might want to have several of these on-hand. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This part is a replacement tie rod. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or defective tie rod on lawn tractors. The tie rod is an essential component of the lawn tractor and enables it to maneuver properly by keeping the front wheels aligned. If this part is dented, broken, or defective in any way, the user may struggle to drive the lawn tractor. Wear work gloves to protect the hands when installing this tie rod. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this tie rod, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This tie rod can be used with a variety of different lawn tractor models manufactured by Husqvarna and Poulan.

This is a subasm pivot that's used for tractors. The part is used to connect the tie rods to the spindle, which will turn the wheel. If the subasm pivot is damaged, it can mean that it will be more difficult to properly turn the lawn tractor. This will make it more difficult to operate the machine efficiently and safely. Replace the part if it has any issues.This piece is made from metal and it is highly durable. Although it is built to last, there is a chance that it might need to be replaced. It could be damaged and bent or broken when the tractor is in use. There is also the possibility that it could rust or wear down over time, which would require a replacement.The subasm pivot will work with certain lawn tractor models from Craftsman and Husqvarna. This piece is sold individually. It is a genuine OEM replacement part that has been sourced right from the manufacturer.

This replacement part is a gear cap. This is a genuine replacement part made by Husqvarna. This part is small but used to keep different gears within the lawnmower safe and secure during use. This part is made of durable plastic and meant to be a strong protector for many gears. A new gear cap might be needed if the current one is missing or damaged in any way. This can include being dented, bent, cracked, or chipped. If the gear cap is not able to stay in place, it might be time to replace it. Be sure to wear work gloves during this repair. It is also recommended that the user refers to the appropriate user manual before replacing this part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.