Parts for Mtd 13AN772G729: Steering Parts

Replace your lawn tractor's main wiring harness if you're experiencing electrical failures, non-starting engine, or intermittent power issues.

Steering gear assembly for lawn tractors. Pivots wheels left and right when you turn the steering wheel. Replace if cracked, worn, or damaged.

Hex cap screw for securing components on lawn mowers, tractors, and outdoor power equipment. Replace if stripped, rusted, or missing hardware.

Hex screw for outdoor power equipment. Replacement fastener for lost, stripped, or damaged screws. Installs in various assembly locations.

This hex bolt is a necessary component used in a variety of small to medium sized gasoline powered engines used primarily in yard work, gardening, and landscaping. The primary use of this hex bolt is to secure the idler pulley assembly to the body of the machine. The idler pulley functions to engage the turning mechanism of the yard tool when engaged. The power yard tools that require an idler pulley which would use this screw are tillers, riding mowers, yard tractors, tillers, snow blowers and chippers. Engaging the rotating part of the yard tool places a great deal of resistance on the idler pulley, which may eventually result in it needing to be replaced. When replacing the idler pulley assembly, it's important to remember that the attaching hardware, such as the hex bolt, has also experienced a great deal of wear and should be replaced as well. This hex bolt attaches the idler pulley assembly directly to the machine housing and can be removed with a 9/16 wrench. Make sure when replacing the bolt to use a genuine OEM manufactured part that is identical to the manufacturer's original piece. This bolt is compatible with the following brands: Yard-Man, Bolens, Craftsman, Yard Machines, Troy-Bilt, Cub Cadet, Huskee, Ryobi, Murray, MTD, MasterCut, and Montgomery Wards.

Ratchet fastener for lawn mowers and tractors. Secures components in place. Replace if broken, stripped, or missing to properly fasten parts together.

Fix loose or vibrating parts with this jam nut. Used as a locknut to secure standard nuts in place on mowers and tractors. Easy 5-minute installation.

Hex jam nut for lawn tractors, tillers, and mowers. Secures components and prevents loosening. Replace if stripped, corroded, or missing.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

Black plastic wheel hub cap for lawn tractors and riding mowers. Replaces cracked, broken, or missing hub caps. Snaps onto wheel hub for a finished look.

Ball joint assembly for lawn tractor front suspension steering. Replaces worn, damaged, or broken ball joints that affect wheel alignment and control.

Shoulder screw for lawn tractors and riding mowers. Secures components with precise spacing. Replace if damaged, stripped, or missing during repairs.

Steering drag link for front-engine lawn tractors. Connects steering components to control wheel direction. Replace if bent, worn, or damaged.

Steering block for lawn tractors and riding mowers. Mounts to the frame to support steering linkage. Replace if cracked, broken, or worn from wear.

Replacement spacer for lawn tractors and riding mowers. This hardware component maintains proper spacing between parts during assembly or repair.

Spacer for lawn tractor assembly. Provides proper spacing between components. Replace if worn, damaged, or missing to maintain correct part alignment.

Lawn tractor pulling to one side or wheels misaligned? This front axle ensures proper wheel positioning and straight steering on riding mowers.

This axle assembly is a genuine MTD part, sold individually. This axle assembly can be used as a replacement part for a lawn mower. The purpose of the axle assembly is to affix the wheels the appliance and to create an adjustable height mechanism for the deck of the appliance.The axle assembly might have to be replaced if it has been damaged or is malfunctioning to the point that it cannot perform its dual function. If any of the components loosen over time or if the axle assembly is punctured, scraped, cracked, or otherwise damaged, the axle assembly should be removed and replaced by this genuine OEM replacement part. It is a simple replacement that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This axle assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, troy-Bilt, Yard Machines, Murray, Yard Man, MasterCut, and Huskee.

Front right axle assembly for lawn tractors. Mounts to the front of your riding mower. Replace if bent, damaged, or broken from impact or wear.

This axle is a genuine MTD part. It is a front left-hand axle made for lawn tractors and riding mowers. It is located on the front left side of the tractor. Wear and tear to the axles is expected over time, especially on the front axles.This axle is a genuine OEM part sourced directly from the manufacturer. It is sold individually. Lawn tractors typically have more than one axle. If one of them is worn, check the others and buy appropriate replacements.This particular axle is compatible with many makes and models of lawn tractors, including several manufactured by Bolens, Brute, Columbia, Craftsman, Huskee, Husky, MasterCut, MTD Gold, Murray, White Outdoor, Yard Machines, and Yard-Man. Since it works with so many models, the easiest way to check is by using the parts compatibility checker. This manufacturer also replaced obsolete part number 938-04014 with this axle.

This replacement part is a hex screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This screw can be used in a variety of ways depending on the repair needed. Hex screws are similar to normal screws except they have a six-sided head, like a hexagon. A new hex screw might be needed if the current one is damaged or missing. It is common that screws may become stripped or loose overtime, causing them to fall out. If any parts of the lawn mower are becoming loose or falling off, the hex screw might be missing. This replacement should be fairly easy and should only require a screwdriver and possibly pliers. This part is a genuine OEM replacement part and is sold individually. Be sure to purchase the correct amount as some appliances require more than one hex screw.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

Secures wheels and attachments to axles on lawn mowers and tractors. Replace if bent, rusted, broken, or lost to restore safe equipment operation.

Replacement cap for lawn mowers and tractors. Installs on various locations to cover openings or protect components. Order if your original cap is cracked, broken, or missing.

This is an OEM replacement for the pivot bar end cap, which is designed to fit on select models of outdoor tractors. The pivot bar end cap covers the pivot bar on the machine and provides the steering support for the lawn tractor. This durable metal part is subject to constant vibrations and repetitive motion, which can lead to damage or wear over time. Without a properly functioning end cap, the pivot bar will not seat correctly and the unit will not be able to steer. This unit is compatible with lawn tractors from MTD, Ryobi, Yard Man, Yard Machines, Troy-Bilt, Husky, and Bolens. The part is sold individually and does not include any additional hardware or components. This durable metal part is made of premium materials and provides an exact OEM fit in compatible models. Replacing this part requires a wrench, socket set, and screwdriver. Be sure to allow the engine to cool entirely and work in a well-ventilated area for safety. Disconnect the power from the unit and wear gloves for hand protection, as well.

Axle cap for riding mowers and lawn tractors. Replaces cracked, broken, or missing caps that cover and protect the axle end. Direct-fit component.

Flat washer for riding mowers and lawn tractors. Replaces worn, missing, or damaged washers on various mounting points and fastener assemblies.

This bearing flange is used on a wide variety of lawnmowers and lawn tractors. Unlike other bearings, the flange bearing is used to ensure the axle assembly stays securely attached to the pivot axle. The purpose of the flange bearing is to make sure the axle is able to move freely and in an effortless manner. The bearing undergoes a large amount of friction and stress while in use, so it can start to wear down.If the lawnmower is showing signs of wear at the flange bearing, it should be replaced. It's a good idea to regularly inspect the part to be sure it is in good shape. To replace the flange bearing, remove the bolt from the steering shaft and remove the old bearing. Grease the new bearing and the shaft before reinstalling the part. Reassemble and tighten all parts.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The flange bearing is made to be compatible with lawnmowers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

Replace the steering tie rod on your lawn tractor. This rod connects steering components and requires replacement when bent, damaged, or worn.

Steering wheel for lawn tractors and riding mowers. Replaces cracked, broken, or worn steering wheels. Installs on the steering column for safe control.

Steering wheel for riding mowers and lawn tractors. Mounts to the steering shaft to control direction. Replace if cracked, broken, or missing.

Steering wheel cap for lawn tractors. Covers the center hub of the steering wheel. Replace if cracked, broken, faded, or missing for a finished look.

Steering wheel cap for lawn tractors and walk-behind mowers. Covers the center hub of the steering wheel. Replace if cracked, broken, or missing.

Replacement tire for riding lawn tractors. Mounts on wheel hub for maneuverability and traction. Replace if popped, leaking air, cracked, or worn.

Push nut fastener for lawn tractors with 3/4-inch inner diameter. Replace if cracked, worn, or missing to secure components properly on your mower.

Flat washer for lawn tractors and riding mowers. Replace when worn, damaged, or during maintenance to ensure proper fastener tension and fit.