Parts for Frigidaire FFFU13F2VW: System Parts

This surface element infinite switch controls heat output for a cooktop or range burner, restoring reliable variable temperature control for affected elements. It replaces a failed or intermittent burner control to return proper heating regulation. What it does:

• Regulates current to a specific cooktop/range surface element for adjustable heat settings
• Allows smooth cycling between low and high heat instead of full-on/full-off behavior
• Commonly replaces switches that feel hot, click, spark, or fail to change heat levels
• Helps stop a burner from staying on a single setting or not heating at all

• Disconnect power at the breaker or unplug the appliance before starting work
• Access may require removing the cooktop or console panel
• Match mounting tabs and wiring terminals to the old switch before finalizing hookup

This replacement cabinet base provides the refrigerator's lower structural support, restoring proper alignment and helping reduce vibration and noise from the compressor area. It mounts under the cabinet to hold internal components in place. What it does

• Replaces a cracked, bent, or corroded cabinet base that can cause sagging or misalignment.
• Provides a stable mounting surface for the compressor, base pan, and lower components.
• Helps reduce vibration and rattling caused by a damaged or loose base.
• Restores proper clearance and support for the appliance cabinet.

• Disconnect power to the appliance before beginning any repair.
• Remove the toe grille and lower access panels to access the base; follow OEM disassembly steps.
• Handle edges carefully—sheet metal can be sharp; wear gloves and eye protection.
• Use correct fasteners and torque lightly; avoid overtightening to prevent distortion.

The Control Assembly is an OEM part for Frigidaire freezers. It works with the thermostat to regulate the temperature inside the freezer and maintain the desired cooling levels.

A bad control can be caused by electrical issues, sensor failure, or damage. Signs of a faulty control include inaccurate temperature readings, frequent temperature fluctuations, or the freezer not reaching the desired temperature.

Symptoms of a bad control can include:

• Inaccurate temperature readings
• Frequent temperature fluctuations
• The freezer not reaching temperature

Replace your malfunctioning control with this genuine OEM part to restore of your freezer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This is a dryer heating element assembly that restores normal drying performance by producing the hot air needed to remove moisture from laundry. Replace a failed heater to get consistent heat and reduce dry cycles. What it does:

• Generates heat for the dryer's tumbling cycle so clothes dry efficiently
• Closes the circuit when operating and opens when cool to help regulate heating
• Commonly linked to no-heat or low-heat symptoms and longer drying times
• Works with the dryer's thermostat and safety cutouts to maintain safe temperatures

• Disconnect electrical power before starting any repair to avoid shock
• Access typically requires removing the dryer's rear or front panel; keep track of fasteners
• Inspect related thermostats and thermal fuses while replacing the heater; replace failed safety parts as needed

The Sensor is an OEM part for Frigidaire refrigerators. It is responsible for monitoring and regulating the temperature inside the refrigerator by sensing the air temperature.

A bad sensor can be caused by electrical issues, damage, or improper calibration. Signs of a faulty thermistor air tower sensor include inconsistent temperature readings, improper cooling or freezing of food, or frequent temperature fluctuations.

Symptoms of a bad sensor can include:

• Inaccurate temperature display 
• Food spoiling quickly 
• Ice buildup or frost

Replace your malfunctioning sensor with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This replacement power cord supplies AC power to compatible refrigerators so the appliance can run reliably. Designed as a direct-fit replacement when the original cord is damaged or worn. What it does

• Replaces a damaged or frayed refrigerator power cord to restore safe power delivery.
• Ensures a secure connection to the appliance and household outlet for normal operation.
• Helps eliminate intermittent power loss, burning odor, or visible insulation damage symptoms.
• For use when the cord or plug shows wear, exposed wires, or bent/broken prongs.

• One replacement power cord.

• Disconnect power at the breaker or unplug the appliance before beginning any work.
• Handle wiring with care; secure connections and strain relief must be used where required.
• Do not modify the cord or plug; use only as intended by the appliance manufacturer.

This filter-drier removes moisture and contaminants from a refrigerator's sealed refrigerant circuit to help protect the compressor and improve cooling reliability. It's a service replacement for sealed-system repairs. What it does:

• Traps moisture and acid from refrigerant to reduce corrosion and oil breakdown.
• Captures particulate debris that can clog expansion devices and reduce cooling.
• Helps restore proper refrigerant flow after a compressor or tubing repair.
• Common symptom: system not cooling efficiently or refrigerant circuit contaminated after failures.

• One filter-drier (quantity: 1)

• Intended for certified HVAC/refrigeration technicians only; sealed-system service requires proper tools and refrigerant handling.
• Replace only when the system is opened for repair (compressor, tubing, or evaporator replacement).
• Must be brazed into the liquid line, evacuated, and charged per manufacturer refrigerant and service specs.
• Dispose of and handle used refrigerant and components according to local regulations.