Parts for Craftsman 247290005: Top Cust Prts Parts

This is an oil filter designed to fit a variety of small, gasoline-powered motors used primarily on lawn equipment. This genuine OEM replacement filter removes contaminants that otherwise would wear down the internal working parts of the engine. While the filter works very well, it should be replaced annually as a part of regular maintenance. Depending on use, the filter may need to be replaced more often. When replacing the oil filter, the crankcase oil must be drained and safely discarded as well. To remove oil from the gasoline engine, start the engine and let it run for a couple of minutes. This circulates the oil and heats the internal engine parts so oil is better able to drain. Next, remove the drain plug located on the bottom of the oil pan and collect the oil. Remember to dispose of the oil safely where it cannot contaminate streams or aquifers. Once the oil has been removed, remove the old filter and discard it properly. The new filter should only be hand-tightened in place as using a wrench may cause the filter gasket to seal to the engine block. This filter will fit Yard Machine mower engines and MTD equipment.

This is a replacement air filter. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a defective, broken, or clogged air filter in various models of outdoor power equipment. The air filter works to help keep the engine in good working order by filtering out contaminants and debris from the air that enters the engine. Over time and with regular use, air filters need to be replaced. Proper tools are required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working with engines, ensure the equipment has cooled down for replacing any parts. For more accurate information on how and where to install this air filter, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this air filter is suitable for use on several different models of outdoor power equipment manufactured by MTD, Cub Cadet, and Troy Bilt. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

This fuel filter is a genuine MTD part, sold individually. This fuel filter can be used as a replacement part for lawn mowers, snowblowers, pressure washers, generators, tillers, log splitters, lawn tractors, and wood chippers. The purpose of the fuel filter is to prevent the accumulation of external materials such as dirt, debris, and pebbles from entering the fuel line.If the fuel filter is punctured, torn, scraped, or eroded to the point that external materials can pass through it and enter the fuel line and the fuel tank, the component must be removed and replaced with this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel filter is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Toro, Cub Cadet, Murray, Wheel Horse, Lawn Boy, Snapper, and Simplicity.

This is a replacement V-belt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a snapped, worn, or otherwise damaged V-belt on a variety of different lawnmower models. This is a 5L belt.The belt fixes directly to the flat idler and engine pulleys. This allows a balanced amount of force to be efficiently supplied to the engine. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. Proper tools are required to replace this part, including a wrench. For more accurate information on how and where to install this V-belt, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this V-belt is suitable for use on several different lawnmower models manufactured by Craftsman, Yard Machines, MTD, and Troy-Bilt. This is a genuine part made of high-quality, durable rubber and is sold individually.

This is a set of two keys that are used with lawn tractors. Keys are put into the ignition and turned to start the engine.A new set of keys will be needed if the originals are cracked, broken, bent, or damaged in any way such that the key will not slide into the ignition. Keys can also be easy to misplace, which is another reason why someone may want to replace their keys. It's also a good idea to have extras on hand in the event that the keys are lost.This key set is a genuine MTD part. It is sold individually. This particular key set is compatible with lawn tractors that are manufactured by the MTD brand and Craftsman brand.

This replacement part is a fuel cap and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. The fuel cap is one of the most important tools in many lawn devices. This part is connected with a wire to the body of the machine, and ensures that the fuel cap does not go missing. The fuel cap is able to attach to the device and seals the fuel tank shut. This is so that no fuel leaks during use.A new fuel cap might be needed if the current one is damaged, broken, or missing from the wire that connects it to the machine. Be aware that while replacing the fuel cap the device can leak fuel. To ensure a swift clean-up, have a towel handy or perform the repair outside. This replacement part is a genuine OEM part and is sourced directly from the manufacturer.

This is a replacement fuel cap with a tether that works for many models of lawn tractors. The fuel cap is used to seal the fuel tank. If the cap is damaged, it could mean that there is a chance of debris getting into the fuel tank. A damaged fuel cap should be replaced for safety.The cap is made from durable plastic, but it may need to be replaced occasionally. If the threads are damaged and it is no longer fitting properly or if it is cracked, the cap should be replaced. In some cases, the fuel cap might be lost. Do not operate the tractor without the fuel cap. The cap can be replaced easily as it simply screws onto place on the fuel tank.This cap works with models of lawn tractors from MTD, Yard-Man, Yard Machines, Troy-Bilt, Cub Cadet, and Bolens. This genuine OEM replacement part is sold individually.

This mulching kit is a genuine MTD part, sold individually. This mulching kit can be used as a replacement part in a lawn mower. The purpose of the mulching kit for the lawn mower is to provide all of the necessary components to facilitate the mulching of grass clippings assembled in the grass catching bag during the typical operation of the appliance.The mulching kit might have to be ordered as a complete replacement part in a mulching plug or chute that has suffered damage. If the mulching plug or chute is punctured, torn, scraped, cracked, dented, or otherwise damaged, this mulching kit should be ordered in order to replace the individual components of the mulching mechanism within the lawn mower. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This mulching kit is compatible with the following outdoor appliance brands: MTD and Craftsman.