Parts for Electrolux CGIS3065PFA: 05 - Top / Drawer Parts

This control panel is the front console for the appliance that houses and protects the user controls and display, restoring the unit's appearance and providing a stable surface for keypad and switch operation. What it does

• Provides the finished front surface for the appliance control area and supports the keypad/display assembly
• Protects internal control electronics from spills and debris that can cause malfunction
• Restores worn, cracked, or faded console appearance for improved usability and aesthetics
• Helps keep buttons and switches correctly aligned for reliable input

• One control panel

• Intended for appliance service; disconnect power before starting any repair
• May require removal of surrounding trim or bezels; keep screws and fasteners organized
• Handle panel carefully to avoid scratching painted or printed surfaces
• If replacing due to control or display failure, verify associated components separately

Used on the 1200 watt element

This bake element is the oven heating element that produces consistent radiant heat for baking and roasting. It restores oven temperature performance so food cooks evenly and recipes finish as expected. What it does

• Heats when the oven is set to bake, converting electrical energy into radiant heat
• Restores proper oven baking temperature and helps eliminate undercooked or unevenly cooked food
• Commonly replaced when the oven won't reach temperature, heats slowly, or the element is visibly damaged
• Works as the lower rear/underside heating element used during standard bake cycles

• One oven bake element

• Always disconnect power at the breaker or unplug the appliance before starting work
• Handle element terminals and sharp sheet-metal edges carefully; use gloves and eye protection
• Basic electrical reconnection required; verify secure terminal connections and proper grounding

This oven bake element replaces a failed or damaged heating element to restore even baking and broiling performance. It heats the oven cavity so cookware reaches set temperatures for proper cooking and roasting. What it does:

• Heats the oven cavity to provide bake and broil heat for cooking
• Commonly linked to symptoms like no heat, weak heating, or uneven baking
• Operates as the primary radiant heating element mounted in the oven rear or bottom
• Works with existing oven terminals and mounting brackets to deliver consistent heat

• Disconnect power to the appliance at the breaker before beginning work
• Handle terminals and element carefully to avoid bending or damaging mounting points
• Installation generally requires removing the oven racks and possibly the oven floor/panel to access the element

This 100W radiant element replaces a failed warming element to restore gentle, even heat in the appliance's warmer/drawer. It delivers low-profile radiant heat for keeping food warm between cooking and serving. What it does:

• Radiates low-level heat to maintain food temperature in the warmer or drawer
• Replaces a broken or non-heating warmer element
• Common symptom: warmer drawer not holding temperature or not heating
• Works as the heating element that sits under the warming surface to provide consistent warmth

• Disconnect power to the appliance before attempting service
• Inspect mounting and wiring; replace any damaged connectors or mounting hardware as needed
• Handle the element carefully to avoid bending or damaging the heating surface

The Main Cooktop Assembly is an OEM part for Frigidaire ranges. It provides a cooking surface for your range. It consists of a cooktop surface that is resistant to heat, stains, and scratches, making it easy to clean and maintain.

A bad main cooktop assembly can be caused by accidental impacts, thermal stress, or wear and tear over time. Signs of a faulty cooktop assembly include cracks, discoloration, or a warped surface.

Symptoms of a bad main cooktop assembly include:

• Cracked or damaged surface
• Discoloration or stains
• Uneven heating during cooking

Replace your damaged or worn-out main cooktop assembly with this genuine OEM Frigidaire part to restore your range. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Handle is an OEM part for Frigidaire ranges. Crafted from durable heat-resistant metal, these handles provide safe, ergonomic access to oven interiors during cooking cycles.  

Prolonged exposure to elevated oven temperatures causes typical discoloration of painted finishes as well as looseness from load stresses reducing tactile control over years. Cooking convenience decreases without gripable surfaces.

Symptoms indicating handle wear include:

• Faded, chipped, or flaking handle finishes  
• Loose, rattling, or awkward movement from placement
• Deteriorating mounting attachments risking accidental falls

Replacing with this OEM Frigidaire handle restores tactile guidance into the cooking cavity. Compatibility also fits some Kenmore, Electrolux, and Gibson ranges renewing secure doorknob function through authorized maintenance. 

This replacement storage box provides a secure, removable bin for holding food and small items inside the appliance. It restores organized storage and keeps contents contained for easy access and cleaning. What it does:

• Serves as a removable storage bin for shelving or drawer locations
• Holds produce, deli items, or other small food packages to prevent shifting
• Replaces cracked, chipped or missing bins that cause spills or poor organization
• Helps maintain proper airflow and visibility on the shelf when installed

• Remove food and empty surrounding shelves before installing
• Slide or snap the bin into its track until it clicks or seats fully; avoid forcing
• Inspect mounting rails or support tabs for damage and replace if worn
• Clean with mild soap and water; do not use abrasive cleaners or sharp tools

This is a replacement mounting screw used to secure panels and components in compatible Frigidaire appliances. It restores proper fit and helps prevent rattles, loose panels, and parts that shift during operation. What it does:

• Fastens trim, panels, brackets, or controls to the appliance frame
• Restores secure attachment to reduce vibration, noise, and movement
• Replaces stripped, missing, or corroded screws that prevent proper assembly
• Works wherever the OEM screw with this part number is specified

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not overtighten to avoid stripping threads or damaging parts
• Keep removed hardware organized and compare parts to the old screw for correct fit

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.

• Fastens the switch body to a bracket or chassis panel
• Helps keep the switch aligned for consistent actuation
• Replaces stripped, corroded, or missing mounting hardware
• Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area

• Disconnect power to the appliance before servicing
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Verify thread size and length match the original hardware
• If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment