Parts for Electrolux EW3LDF65GSD: 09 - Top / Drawer Parts

This spacer provides precise separation and support for appliance components to maintain proper alignment and reduce friction or chafing. It helps keep panels and parts positioned to prevent vibration, wear, and unwanted noise. What it does:

• Keeps parts and panels spaced correctly to maintain alignment and fit
• Prevents rubbing, chafing, or contact between adjacent components
• Helps reduce vibration and rattling caused by loose or misaligned parts
• Supports secure mounting of components where a small gap or standoff is required

• Includes: One spacer

• Disconnect power to the appliance before attempting any repair
• Inspect the mounting area for damage and replace any cracked or deformed spacers
• Install in the same orientation and location as the original; use only the correct fasteners

This replacement cooktop grate provides a stable support for cookware over a gas burner, restoring safe, even placement for pots and pans. Ideal when the original grate is chipped, cracked, or warped. What it does:

• Supports cookware above the burner so flames heat pots and pans evenly
• Replaces damaged, chipped, or warped grates that cause wobbling or instability
• Helps prevent direct flame contact with cookware edges or cooktop surface
• Restores a flat, secure cooking surface for safer use

• Always turn off all burners and let the cooktop cool completely before handling
• Handle with care—grates can be heavy and may have sharp edges if damaged
• Position the grate so it sits securely on the burner supports before use
• Clean with non-abrasive cleaners to avoid damaging the finish; do not use while wet

This removable cooktop griddle provides a flat, durable cooking surface for preparing pancakes, sandwiches and other foods over range burners. It restores a smooth, even surface for stovetop griddle cooking when the original is damaged or worn. What it does:

• Replaces a worn, warped or damaged cooktop griddle to restore an even cooking surface
• Provides a flat, continuous surface for foods that need consistent contact with heat
• Helps reduce hot spots and sticking when the original griddle surface is compromised
• Works with compatible range/cooktop configurations that accept a removable griddle plate

• One removable cooktop griddle plate

• Disconnect power to the appliance (and turn off gas if applicable) before handling parts
• Allow the appliance and griddle to cool completely before removal or installation
• Fit the griddle into the cooktop openings so it sits flat and level; verify proper seating before use
• Clean per manufacturer guidance; avoid abrasive tools that can damage the cooking surface

The Screw is an OEM replacement part for Frigidaire appliances. This screw is used to securely fasten components, such as panels, brackets, or internal parts, ensuring the appliance remains stable and functions correctly. Its precise design ensures a snug fit and reliable performance in the designated area of the appliance.

Over time, screws can become stripped, corroded, or loosened due to vibrations, frequent use, or environmental factors. A damaged or missing screw may lead to instability, misaligned components, or operational issues with the appliance.

Symptoms of a bad or missing screw include:

• Loose or misaligned panels or components
• Rattling or unusual noises during operation
• Difficulty in securing parts during repairs or adjustments
• Parts becoming detached or unstable

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This shield is a molded protective cover that helps protect internal refrigerator components from damage and keeps wiring and small parts out of the way. It's a simple replacement that restores the appliance's original protection. What it does:

• Covers and protects internal components from knocks, debris, and incidental contact
• Keeps wiring and small harnesses routed and secured away from moving parts
• Helps maintain proper clearance around critical components for safe operation
• Can reduce the chance of component damage during normal use or service

• Disconnect power to the appliance before starting any service.
• Remove any adjacent panels or fasteners as needed to access the mounting location.
• Handle carefully to avoid cracking the plastic; reinstall with the original fasteners.

This replacement control panel restores the appliance's front console so you can access controls and maintain the unit's appearance. It fits where the original panel mounted and matches OEM form and function. What it does:

• Provides the front console surface and button/selector openings for normal control operation
• Replaces cracked, scratched or cosmetically damaged panels to restore appearance
• Helps resolve issues where the panel surface is broken or buttons cannot be used due to damage
• Matches OEM mounting points for a direct-fit replacement

• Disconnect power to the appliance before beginning any repair
• Handle edges gently; panels can have sharp sheet-metal or plastic edges
• Basic hand tools are typically required; keep mounting screws and clips for reuse

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

Size: 3/4 inch od x 1/4 inch id.