Parts for Kenmore 790.95073312 (79095073312, 790 95073312): Top / Drawer Parts

Replacement control panel for electric ranges. Covers the control area and houses buttons or displays. Needed when original is cracked, damaged, or worn.

Replacement drawer glide for electric and gas ranges. Guides storage drawer along its track for smooth opening and closing. Replaces cracked or worn glides.

Oven rack glide for electric ranges. Installs along the oven cavity wall to guide racks smoothly. Replace if worn, broken, or missing for proper support.

This is an induction surface element designed for the right front position on an induction cooktop. It generates electromagnetic energy to heat compatible cookware directly on the cooking surface. Replace this element if the right front burner fails to heat, heats unevenly, or displays an error code when cookware is placed on it.

Replace your range's main top panel if the original is cracked, chipped, scratched, or stained. This component covers the burner assembly and provides the cooktop surface.

This is a metal hinge bracket that secures the main cooktop to the range frame and allows it to be lifted for access to components underneath. It connects the cooktop panel to the body of the range at the hinge point. Replace this bracket if it is bent, broken, or missing, which can cause the main top to sit unevenly or not stay properly secured.

This replacement channel is the support bracket that guides and stabilizes a refrigerator drawer or shelf, helping keep components aligned for smooth opening and closing. Use it to replace damaged or worn channels. What it does

• Guides and supports a drawer or shelf to maintain proper alignment
• Reduces sticking, binding, or uneven drawer movement
• Helps eliminate rattling or excessive play in the drawer/shelf assembly
• Restores the intended fit of the drawer/shelf to prevent gaps or misalignment

• One channel

• Disconnect power to the appliance before starting any repairs
• Remove the drawer or shelf per the appliance disassembly steps to access and replace the channel
• Inspect mounting tabs and fasteners; replace any damaged clips or screws as needed

Secures internal components and panels in your range. Replace this mounting bracket if cracked, broken, or missing to restore proper support and alignment.

Mounting bracket for electric and gas ranges. Secures components in place. Replace if bent, cracked, or broken to restore proper fitment and stability.

This is a stainless steel door handle for a range or oven. It provides a grip point for opening and closing the oven door during everyday use. Replace this handle if it is cracked, loose, broken at the mounting points, or if the finish is worn or damaged.

This shield is a protective cover designed to guard internal appliance components from debris, moisture, and accidental contact. It helps keep parts secure and can reduce noise caused by loose or exposed components. What it does:

• Covers and protects vulnerable parts from dirt, spills, and physical damage
• Helps prevent contact with moving or hot components for safer operation
• Can reduce rattling or vibration noise when a damaged shield is replaced
• Maintains proper airflow or spacing when the original shield is in place

• One shield/protective cover

• Disconnect power to the appliance before beginning any work
• Remove any panels or shelves necessary to access the damaged shield
• Handle edges carefully; use basic hand tools to remove and replace fasteners

This replacement part is a black element mounting clip used in ranges or wall ovens. This clip is used for surface elements on electric ranges and ovens. The clip itself connects the surface of the element to the support bracket which allows the stove to heat up. The user might need a new clip or clips if the heating element on the stove is loose, if the heating element is completely detached, or if the clip itself is bent or broken. This clip is black and made of sturdy metal that can withstand heat as well as strain on the clip itself. Installation of this clip is very simple as it just requires replacing the old one with a new one and making sure it is secure. Pliers might be required if the old clip is bent or stuck near or on the heating element. There are no special tools needed for this repair. This is an OEM part sourced directly from the manufacturer. It is sold individually. This part is compatible with machines from Frigidaire and other brands like Electrolux, Gibson, Kelvinator, Crosley, Westinghouse, and more.

Replacement mounting screw for electric ranges. Secures panels, brackets, or components. Order a new screw if yours is stripped, missing, or damaged.

This is a heating element designed for the warming drawer of a range. It provides low, consistent heat to keep food warm after cooking. Replace this element if your warming drawer no longer heats, heats unevenly, or has visible damage such as cracks or burn marks.

Mounting bracket that secures the heating element in your range. Replace this bracket if it's bent, broken, cracked, or missing to properly support the element.

Range won't heat or shuts off unexpectedly? A faulty thermal fuse may be the cause. This safety component protects against overheating. DIY repair.

This metal rack fits inside the warming drawer beneath the oven, providing a flat surface to hold plates, dishes, or cooked food at a warm serving temperature. It slides in and out of the drawer on built-in guides. Replace it if the rack is bent, warped, rusted, or missing, which can prevent proper food placement and even heat distribution in the warming drawer.

This damper is the refrigerator air inlet that controls airflow between compartments to help maintain even temperatures. Replaces a worn or stuck damper to restore proper cold-air distribution and reduce temperature imbalance. What it does:

• Regulates airflow from the freezer to the fresh-food compartment to help stabilize interior temperatures.
• Helps correct symptoms like uneven cooling, warm spots in the fridge, or overly cold freezer-to-fridge balance.
• Prevents over-working of the compressor by allowing proper air circulation when functioning.
• Can become stuck or fail to open/close, producing reduced airflow or unusual noises.

• One damper assembly.

• Disconnect power to the appliance before beginning any repair.
• Access typically requires removing interior liners or control housing—handle panels and clips gently to avoid damage.
• Compare the new part to the removed component to fit before reinstalling panels.

This is the exterior handle mounted on the oven door, used to open and close the door during cooking. It attaches to the door with mounting brackets or screws. Replace this handle if it is cracked, broken, loose, or if the mounting points have become damaged, making it difficult to safely open the oven door.

Black mounting screw that secures range body side panels. Replace if stripped, missing, or corroded. 8-18 x 11/16 inch fastener for structural assembly.

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

Replaces damaged or frayed wire harness that connects electrical components in your range. Install when wiring is cracked, melted, or corroded.

Replacement mounting screw for ovens and ranges. Secures panels, brackets, trim, and internal components. Replace missing or stripped screws to restore fit.

Size: 6-20 x 0.312 inch.

Replacement mounting screw that secures panels, trim, and components in ranges and ovens. Needed when original screws are lost, stripped, or damaged.

Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.

Size: 8-32t x 0.500 inch. Color: Black.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.