Parts for Ge VTW565ASV0WB: Top Panel Lid Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This thermistor clip secures a refrigerator/freezer temperature sensor in the correct position so the control can read accurate temperatures and keep the appliance cycling properly. Simple replacement of a damaged clip restores proper sensor placement. What it does:

• Holds the refrigerator thermistor/sensor against the evaporator tube or cabinet to ensure stable temperature readings
• Prevents the sensor from shifting or falling away, which can cause incorrect temperature control or erratic cooling
• Keeps wiring routed and protected from contact with moving or hot components
• Small, durable clip designed for a snug fit without damaging the sensor

• Disconnect power before servicing to reduce risk of shock or injury
• Handle the thermistor sensor carefully; avoid kinking or pulling the sensor leads
• Clip the sensor gently into place so it contacts the evaporator tube or designated mounting point without crushing the sensor
• After installation, restore power and verify proper temperature control and normal compressor/defrost cycles

This silicon controlled rectifier (SCR) is an electronic switching device used in appliance control circuitry to regulate power to motors or heating circuits. Replacing a faulty SCR restores reliable power control and helps resolve intermittent or failed operation. What it does:

• Controls and modulates electrical current in control boards and power circuits
• Allows timed or variable power delivery to heating elements or motors in appliances
• Helps stop intermittent operation caused by a failed switching device
• Commonly replaced when an appliance experiences no heat, no motor run, or erratic performance

• Disconnect power to the appliance before servicing to avoid electric shock
• Handle with ESD precautions; avoid touching terminals and static-sensitive areas
• Install the replacement SCR with the same orientation and secure mounting as the original

This SCR (silicon controlled rectifier) is a replacement power-control semiconductor used in appliance circuits to switch and regulate current. It restores proper control of heater/motor circuits when the original SCR fails. What it does:

• Controls current flow in high-power appliance circuits for timed heating or motor control.
• Replaces a failed SCR that causes intermittent or no power to the controlled component.
• Common symptom: appliance elements or motors do not turn on or cycle correctly.
• Common symptom: visible burn, cracking, or open circuit at the SCR.

• Disconnect power to the appliance before accessing electrical components to avoid shock.
• Handle the SCR carefully to avoid static or mechanical damage; use original mounting and hardware.

A single replacement screw used to secure appliance panels, trim, and internal brackets so components stay aligned and reduce rattling. Simple, direct-fit fastener for restoring proper mounting and stable operation. What it does:

• Secures panels, mounting brackets, trim pieces and other appliance components
• Helps stop rattling, vibration, or loose panels caused by missing or stripped fasteners
• Restores proper alignment of doors and access panels when original screw is lost or damaged
• Matches the OEM fastening point for a straightforward hardware replacement

• Disconnect power to the appliance before working on electrical components or access panels
• Use the correct screwdriver to avoid stripping the head; match drive type to the screw
• Tighten firmly but do not overtighten—stop when snug to avoid damaging threads or parts
• Keep removed fasteners organized and compare with the replacement to ensure correct fit

Fix bleach pooling or uneven dispensing in your laundry center. This funnel directs bleach into the wash tub, preventing spills and odor issues.

Replacement clip cover that snaps over mounting clips to conceal hardware on your washer dryer combo. Restores finished appearance when original is cracked or missing.

Replacement door hinge bushing for laundry centers. Restores smooth pivot operation when original is worn, cracked, or causes door misalignment or sticking.

This lid bumper cushions the lid of your top-load washer as it closes, absorbing impact to reduce slamming noise and protect the top panel's finish. Replace a worn or missing bumper to restore smooth, quiet lid operation. What it does

• Absorbs impact between the lid and cabinet to reduce slamming and vibration noise
• Helps protect the top panel finish from chips and scratches near the lid area
• Restores proper cushioning when the original bumper is missing, cracked, or flattened
• Common symptoms: lid slams or clunks when closing, increased noise, visible missing bumper

• 1 lid bumper

• Disconnect power before servicing
• Open the lid and pull the old bumper straight out of its mounting hole; needle-nose pliers can help if it's stuck
• Clean the hole and surrounding surface for a secure fit
• Press the new bumper fully into the hole until seated flush; for even cushioning, consider replacing both if your model uses two

Left-side hinge cover for laundry center washer lids. Restores appearance and protects hinge assembly. Replace if cracked, broken, or missing.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Washer not heating water correctly or wonky water temperature? The thermistor monitors water temp during cycles. Common DIY fix, takes about 30 minutes.

The Lid Lock Assembly is an OEM replacement part for GE washing machines. This assembly ensures the washer lid remains securely locked during operation, preventing accidental openings and ensuring safety during high-speed spin cycles. It also helps the machine operate only when the lid is properly closed.

Causes of a bad lid lock assembly can include wear from frequent use, electrical issues affecting the locking mechanism, or damage to the lock's housing or wiring. These issues can impair the washer's ability to lock and operate properly.

Symptoms of a bad lid lock assembly include:

• Washer not starting or stopping mid-cycle
• Error codes related to the lid lock mechanism
• Lid not locking or unlocking as expected
• Audible clicking without the lid securing

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures the lid lock mechanism on your washer. Mounts around the strike area where the lid lock engages. Replace if cracked, broken, or missing.

Washer won't start or spin? Lid lock light stays off or cycles? This lid lock service kit restores proper lid locking. Video guide included.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.