Parts for Ge GTW860SPJ0MC: Top Panel & Lid Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This 8-32 x 1/2 machine screw replaces a small fastener used on appliances to secure panels and components, restoring a snug fit and reducing vibration or rattling. What it does

• Secures panels, brackets, and internal components to prevent movement
• Stops rattling or vibration caused by a missing or loose screw
• Provides a direct replacement for the original 8-32 x 1/2 fastening point
• Works where a standard 8-32 machine screw is specified

• Turn power off and unplug the appliance before accessing internal components
• Use the correct screwdriver or nut driver to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic

Illuminates your washer tub for easy loading and unloading. Replace when light is dim, cracked, or not working. Verify fit with your model number.

Size: 8 - 18 ab.

Original OEM Phillips wafer head screw 8 - 18 X 3/8 inch

Replacement clip retainer for washers. Secures interior panels and components to prevent rattling or loose trim. Installs to restore proper fit.

Fix a washer that won't spin or stops mid-cycle with a new lid lock assembly. Restores safe operation when the lid isn't detected or won't lock securely.

Fix a washer that won't start or shows lid lock errors with this lid lock bezel. Restores proper lid locking function. Moderate DIY repair.

Washer detergent dispenser assembly distributes detergent during wash cycles. Replace if cracked, leaking, or not dispensing properly. Verify fit with your washer model number before ordering.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Secures water hoses in your washer to prevent leaks. Replace if loose, corroded, or during hose replacement. Verify fit with your model number.

Replacement flexible hose for washers. Connects water supply or drainage lines. Replace if cracked, leaking, worn, or deteriorated to prevent damage.

Spring-style hose clamp secures washer hoses to fittings to prevent leaks. Replace when clamps lose tension or show rust. Verify fit with model.

Replace missing or stripped mounting screws in your washer dryer combo. This 12-pack secures panels, components, and internal parts during assembly or repair.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

8-18 x 9/16-inch hex washer head screw secures panels, brackets, and trim in appliances. Replace missing, damaged, or stripped screws for proper fit.

Fill nozzle assembly that directs water into the washer tub during fill cycles. Replace if cracked, broken, or leaking to restore proper water flow.

Fix washer not filling, slow fill, or incorrect water levels. This 6-solenoid water inlet valve controls water flow to multiple outlets. DIY repair.

Replace your washer's water valve flat washer if you're experiencing leaks during fill cycles. This small seal prevents water seepage at valve connections.

A flat washer used at the water valve connection to create a reliable seal and help prevent leaks. Small, simple replacement that restores a tight water inlet connection and reduces drip or seepage around the valve. What it does:

• Seats between the water valve fitting and hose or tube to form a watertight seal
• Helps stop leaks or slow drips originating at the valve connection
• Stabilizes the connection to reduce movement-related wear
• Common symptom: visible leaking or dripping at the valve or hose connection

• Turn off water supply and unplug the appliance before servicing
• Remove the hose or fitting, replace the old washer, and reseat the connection
• Hand-tighten fittings, then snug slightly with a wrench—avoid over-tightening
• Inspect valve/gasket surfaces for debris or damage and replace if worn

Leaking water valve connection? This flat washer creates a watertight seal between the valve and hose or fitting. Simple DIY fix for water leaks.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.