Parts for Frigidaire FGIS3065PFJ: Top Parts

This control panel is the front console for the appliance that houses and protects the user controls and display, restoring the unit's appearance and providing a stable surface for keypad and switch operation. What it does

• Provides the finished front surface for the appliance control area and supports the keypad/display assembly
• Protects internal control electronics from spills and debris that can cause malfunction
• Restores worn, cracked, or faded console appearance for improved usability and aesthetics
• Helps keep buttons and switches correctly aligned for reliable input

• One control panel

• Intended for appliance service; disconnect power before starting any repair
• May require removal of surrounding trim or bezels; keep screws and fasteners organized
• Handle panel carefully to avoid scratching painted or printed surfaces
• If replacing due to control or display failure, verify associated components separately

Used on the 1200 watt element

This bake element is the oven heating element that produces consistent radiant heat for baking and roasting. It restores oven temperature performance so food cooks evenly and recipes finish as expected. What it does

• Heats when the oven is set to bake, converting electrical energy into radiant heat
• Restores proper oven baking temperature and helps eliminate undercooked or unevenly cooked food
• Commonly replaced when the oven won't reach temperature, heats slowly, or the element is visibly damaged
• Works as the lower rear/underside heating element used during standard bake cycles

• One oven bake element

• Always disconnect power at the breaker or unplug the appliance before starting work
• Handle element terminals and sharp sheet-metal edges carefully; use gloves and eye protection
• Basic electrical reconnection required; verify secure terminal connections and proper grounding

This oven bake element replaces a failed or damaged heating element to restore even baking and broiling performance. It heats the oven cavity so cookware reaches set temperatures for proper cooking and roasting. What it does:

• Heats the oven cavity to provide bake and broil heat for cooking
• Commonly linked to symptoms like no heat, weak heating, or uneven baking
• Operates as the primary radiant heating element mounted in the oven rear or bottom
• Works with existing oven terminals and mounting brackets to deliver consistent heat

• Disconnect power to the appliance at the breaker before beginning work
• Handle terminals and element carefully to avoid bending or damaging mounting points
• Installation generally requires removing the oven racks and possibly the oven floor/panel to access the element

Restore reliable heat with this replacement heating element. A worn or damaged element can cause long heat-up times, uneven temperatures, or no heat at all. Swapping it out helps return consistent, dependable heating performance.

• Converts electrical energy to heat when energized
• Common symptoms: no heat, slow to heat, or uneven/inconsistent temperatures
• Visual clues: cracks, breaks, burn spots, or terminals damaged/corroded
• Helps resolve heat-related error codes after proper diagnosis

• Disconnect power at the breaker before servicing; verify no voltage present
• Note wire positions and terminal orientation before removal
• Handle carefully; avoid stressing terminals and element sheath
• Inspect wiring and connectors; replace any heat-damaged spade terminals before reassembly

The Range Lamp Assembly is an OEM part for Frigidaire stoves and ranges. It consists of the halogen light bulb, lens cover, and wiring harness necessary to illuminate the oven cavity. This lamp assembly provides light to the cooking and baking space, making it easier to view food and monitor cooking progress.  

Symptoms of a bad range lamp assembly include:

• The oven light not turning on at all  
• Dim, flickering, or intermittent light
• Burned out or blown light bulb
• Cracks or damage to the lens cover

Causes of failure can be a burned out light bulb, broken wiring, or damage from impact or heat over time. 

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Main Cooktop Assembly is an OEM part for Frigidaire ranges. It provides a cooking surface for your range. It consists of a cooktop surface that is resistant to heat, stains, and scratches, making it easy to clean and maintain.

A bad main cooktop assembly can be caused by accidental impacts, thermal stress, or wear and tear over time. Signs of a faulty cooktop assembly include cracks, discoloration, or a warped surface.

Symptoms of a bad main cooktop assembly include:

• Cracked or damaged surface
• Discoloration or stains
• Uneven heating during cooking

Replace your damaged or worn-out main cooktop assembly with this genuine OEM Frigidaire part to restore your range. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This rubber bumper cushions doors and panels to reduce noise, prevent metal-on-metal contact, and protect finishes for smoother, quieter operation. Replace worn or missing bumpers to help restore proper seating and reduce rattling. What it does:

• Absorbs shock between moving parts to prevent bangs and scratches
• Keeps doors and panels aligned for a tighter seal and quieter close
• Reduces vibration and rattling during operation
• Helps protect painted or plated surfaces from wear at contact points

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Typically a push-in or snap-in replacement; press into the original mounting hole until seated
• Inspect nearby bumpers and replace in matched sets if others are cracked or missing

The Handle is an OEM part for Frigidaire ranges. Crafted from durable heat-resistant metal, these handles provide safe, ergonomic access to oven interiors during cooking cycles.  

Prolonged exposure to elevated oven temperatures causes typical discoloration of painted finishes as well as looseness from load stresses reducing tactile control over years. Cooking convenience decreases without gripable surfaces.

Symptoms indicating handle wear include:

• Faded, chipped, or flaking handle finishes  
• Loose, rattling, or awkward movement from placement
• Deteriorating mounting attachments risking accidental falls

Replacing with this OEM Frigidaire handle restores tactile guidance into the cooking cavity. Compatibility also fits some Kenmore, Electrolux, and Gibson ranges renewing secure doorknob function through authorized maintenance. 

This replacement storage box provides a secure, removable bin for holding food and small items inside the appliance. It restores organized storage and keeps contents contained for easy access and cleaning. What it does:

• Serves as a removable storage bin for shelving or drawer locations
• Holds produce, deli items, or other small food packages to prevent shifting
• Replaces cracked, chipped or missing bins that cause spills or poor organization
• Helps maintain proper airflow and visibility on the shelf when installed

• Remove food and empty surrounding shelves before installing
• Slide or snap the bin into its track until it clicks or seats fully; avoid forcing
• Inspect mounting rails or support tabs for damage and replace if worn
• Clean with mild soap and water; do not use abrasive cleaners or sharp tools

This is a replacement mounting screw used to secure panels and components in compatible Frigidaire appliances. It restores proper fit and helps prevent rattles, loose panels, and parts that shift during operation. What it does:

• Fastens trim, panels, brackets, or controls to the appliance frame
• Restores secure attachment to reduce vibration, noise, and movement
• Replaces stripped, missing, or corroded screws that prevent proper assembly
• Works wherever the OEM screw with this part number is specified

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not overtighten to avoid stripping threads or damaging parts
• Keep removed hardware organized and compare parts to the old screw for correct fit

This trim is a decorative finishing panel that restores the appliance's original appearance and covers exposed edges for a clean, factory look. It replaces damaged, cracked, or missing trim to improve cosmetic appearance. What it does

• Covers and protects exposed edges on the appliance surface for a finished look
• Hides gaps and fasteners for a clean, factory appearance
• Replaces cracked, chipped, or otherwise damaged trim that detracts from appearance
• Helps keep dirt and moisture out of exposed seams

• One trim piece as shown

• Disconnect power (and water, if applicable) before beginning any repair
• Remove any retaining screws or clips and carefully pry away old trim to avoid damaging adjacent surfaces
• Align new trim and secure with original screws or clips; do not overtighten fasteners
• Handle painted or chrome-finish trim with care to avoid scratching during installation

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.