Parts for Mastercut 13AJ775S059 / 2011: Transmission Parts

This replacement part is a drive shaft assembly intended for use in lawn mowers. This is a genuine replacement part made by MTD. Drive shaft assemblies are an important part of all lawn mowers. This part is responsible for rotating the cutting blades on the appliance so that the user is able cut grass effectively and efficiently. A new drive shaft assembly might be needed if the user notices that the cutting blade is no longer turning, or is unable to start. If the cutting blade stops turning in the middle of using the appliance, the drive shaft might need replacing. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. Working gloves will be needed as this part is close to sharp blades.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This replacement part is a gear. Gears typically have ridges along the edges that are used to connect multiple parts so they can rotate or turn during use.A new gear might be needed if the current one is missing or damaged. If the user hears unusual noises coming from the inside of the machine, it might be due to a missing or malfunctioning gear. Be sure the engine is completely turned off before replacing this part to prevent injury.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is a clutch collar and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. The clutch collar is the cast piece that the clutch release bearing mounts to. This is an important part of many different types of machinery as it helps the clutch and allows the engine to start and stop. A new clutch collar might be needed if the current one is visibly damaged or missing. If the user notices that the clutch is no longer working in tandem with the engine, the clutch collar might be to blame. Be sure the engine is fully turned off before starting these repairs. This should be a simple and quick repair and should not require more than common household tools. This is a genuine OEM replacement part and is sourced directly from the manufacturer. This part is sold individually.

This washer is compatible with most lawn mowers and lawn tractors. The smooth, round edges fit perfectly with 5/8-inch bolts to attach the bolts to parts on the mower, as necessary. The washer provides a buffer between the bolt and the surface that it is being attached to. They are highly recommended for protecting parts that are being fastened together.The lack of a washer can cause permanent damage to the piece that the bolt is attached to. If the bolt does not have a washer to prevent it from moving and rusting, it can cause the bolt to fail. With products such as lawn mowers, this can spell disaster for both the appliance and its handler. These washers are high-quality and will prevent excess corrosion for the bolt. However, moisture and residue left after use can cause the washers to fail. In this case, a replacement will be necessary. This replacement part is compatible with most lawn mowers and tractors. This includes Ace, Ryobi, and MTD. This is an OEM replacement part sourced directly from the manufacturer. Sold individually.

This replacement part is a washer. This part is small but important in various types of equipment. Washers work with other small parts like screws and nuts to ensure that multiple parts are secure and in place during use.A new washer might be needed if the current one is worn down or damaged. It is not uncommon for washers to become dented or otherwise damaged over time due to friction and normal wear and tear within the machine. Work gloves are recommended when working with small parts like washers. Be sure the engine is powered down before attempting to complete this job.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This part is a replacement washer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, lost, or defective flat washer in a variety of outdoor power equipment. Washers are a standard piece of hardware with a wide variety of uses. They can be used with various equipment components to ensure they are secured properly together by providing a greater surface bearing area for screws and bolts. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this washer, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this washer is suitable for use on several different models of line outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a thrust washer. It is a genuine replacement part made by MTD. Thrust washers are small but important component, allowing space between certain parts near and around the engine. Washers are typically used with screws and nuts to provide a tight and secure fit for many different parts in the machine.A new thrust washer might be needed if the current one is damaged or missing. Washers can become stripped over time due to friction and other motions inside the machine and need to be replaced. Be sure the engine is turned off before starting a repair. Typically washers are easy to replace and will only require a screwdriver or pliers.This thrust washer is a genuine OEM replacement part and is sourced directly from the manufacturer. Note that it is sold individually.

This is a replacement differential assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, damaged, or faulty differential assembly on a variety of different lawnmower models.The differential transmits the torque created by the engine to each of the wheels. A differential allows the wheels to each spin at a different speed, improving maneuverability. If the differential assembly malfunctions, the lawnmower may be difficult to drive or not move at all. Access to proper tools is required to install this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this differential assembly, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this differential assembly is suitable for use on several different lawnmower models manufactured by MTD, Cub Cadet, Yard Machines, Yard Man, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a hex screw. This part is small but important in many different kinds of equipment. Hex screws are able to work with other small parts such as washers or nuts to ensure that components are secure within the equipment.Overtightened screws might be stripped and could fall out or get stuck in place, necessitating replacement. Over time, exposure to the elements may lead to a screw becoming worn or corroded, which may cause it to break or get stuck.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This is a brake puck intended for use with lawnmowers. It is made from durable material and is part of the brake assembly. The purpose of the brake puck is to create pressure on the brake disk whenever the brake pedal is pushed. This part is essential to ensuring the lawnmower stops when a user presses down on the brake. Over time, the brake puck will start to wear down and may need to be replaced.One of the indications that the brake puck needs to be replaced is a squealing sound that occurs when the brake pedal is pressed. This happens because the brake puck wears down, and metal is able to rub against metal. If the problem isn't fixed, it can cause additional issues with the lawnmower. The brake puck should be replaced using a socket set and wrench set.This brake puck is designed for use in lawnmowers manufactured by Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. It is sold as an individual part. The puck is a genuine OEM replacement part sourced directly from the manufacturer.

This ball detent is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a ball detent is to temporarily keep two parts in place relative to one another, as one or both of the parts rotate.A ball detent might have to be replaced in the event that it suffers damage over time or is lost or misplaced. It is possible for ball detents to fall out of their spot, meaning that the parts that it ordinarily holds in place will not be able to rotate properly. Additionally, a ball detent might have to be replaced if there is material deterioration. If this occurs, a replacement ball detent part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ball detent is compatible with the following brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.