Parts for Ryobi 41AJTP-A034: Tree Pruner Add-On Parts

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

This is a replacement drive shaft used in pruners, trimmers, and pole saws. The drive shaft connects the trimmer head to the engine, and usually runs the length of the trimmer stem. Any straight stem or curved stem trimmer will use the drive shaft as the primary means of turning the head of the trimmer (where all the cutting is done). If the equipment is not spinning, the drive shaft may need to be replaced.This is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with these manufacturing brands: Ryobi, Troy-Bilt, Yard Man, Bolens, MTD, and Cub Cadet equipment for trimmers and pruners.

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.

This coupler features a split-boom design that includes the knob, coupler, and the screws required to attach the upper shaft and lower boom before using the trimmer. Because of constant exposure and potential debris impacts, the coupler can become damaged over time and with regular use. The knob and screws can also become damaged or lost, which would require replacing the entire unit with an OEM replacement like the one here. This genuine OEM drive shaft coupler is manufactured by RYOBI and designed for use with their trimmers, as well as machines from MTD, Yard Man, Yard Machines, Bolens, Troy-Bilt, and Cub Cadet. It can also be used with select models of edgers and pruners from these brands. This coupler is sold as an individual assembly with all of the pieces required to complete the installation. The shaft is made of durable metal and the knob is a sturdy plastic piece. It will require a screwdriver with a Philips head to replace this part. Always wear gloves when working on lawn and garden equipment.

This part is a replacement bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, stripped or defective bolt in outdoor power equipment.Bolts are important for holding together various components of the equipment. They are a standard piece of hardware that can become easily lost, stripped, corroded, or defective, requiring replacement. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this bolt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This bolt can be used with different models of outdoor power equipment that have been manufactured by MTD, Craftsman, and other brands. Part sold individually.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement in lawnmowers, snowblowers, string trimmers, pole pruners, and pole saws. The purpose of a screw in these devices is to affix and fasten components to one another through the process of rotation and piercing through the materials. A screw might have to be replaced in the standard lifespan of an outdoor appliance if it is lost, misplaced, or damaged. Check for punctures, tears, loosening, warping, or corrosion to the metal. This damage can stem from general wear and tear or from direct impact with a falling object or a surface. It can warp the component beyond repair, in which case it must be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, Murray, and Yard Man.

This is an extension boom and flex shaft assembly that is used in pole pruners and string trimmers. It is made to offer extra extensions so the pruner or trimmer can be used on items farther away from the user. It adds additional reach to make yard and garden tasks easier. The tube comes with an internal flexible drive shaft. It arrives to the user in a pre-assembled state and is ready to be installed. This shaft assembly can be used to replace a broken part or purchased to add reach to a pruner or trimmer that didn't come with one.This boom and flex shaft assembly requires no tools to be installed. Make sure the equipment it will be installed on is turned off, and the spark plug wire has been disconnected. Access the shaft and remove the broken boom and flex shaft assembly. The new replacement part can be installed by hand.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The extension boom and flex shaft assembly is designed to be used with string trimmers and pole pruners manufactured by MTD and Ryobi.

A shoulder strap is a strap made to be attached to machinery in order to make the use of the machine easier, less awkward, and more comfortable for the user. It designed for use with outdoor lawn and garden equipment such as string trimmers, leaf blowers, and pole pruners. Fortunately, if a shoulder strap breaks, it will be very obvious and is easily fixed. Signs of a faulty shoulder strap include frayed edges, worn or thin fabric, or faulty attaching mechanisms holding the strap to the machine. The replacement or repair process is incredibly simple, as it requires no technical savvy or internal part replacement. Everything requiring replacement is visible from the outside of the machine.This shoulder strap is also sometimes referred to simply as a backpack harness assembly strap. The purchase of the shoulder strap does include any necessary mounting hardware needed to attach it to outdoor equipment. The shoulder strap is built to last and create a more pleasant experience while using a blower, vacuum, or pruner.This shoulder strap is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. In most cases, since each strap is sold separately, if the user prefers to attach the shoulder straps in a way that resembles a backpack or harness instead of just a single shoulder strap, the purchase of two separate shoulder straps will be necessary. This particular backpack harness assembly strap is compatible for use with machines made by Craftsman, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.