Parts for Weedeater YM600: Trimmer Parts

This flex shaft is a genuine Husqvarna part, sold individually. This flex shaft can be used as a replacement part in a string trimmer. The purpose of a flex shaft in a string trimmer is to affix to the drive shaft assembly where it can propel the motion of the cutting trimmer head.The flex shaft may become dented, kinked, cracked, warped, or completely broken, and if this occurs, the component should be removed and replaced by this genuine OEM replacement part; this replacement should be in accordance with the relevant instructions in the appliance manual. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flex shaft is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, and Poulan.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This is a screw designed to be used in many types of lawn and garden equipment. The screw can be used in several locations but is most commonly located in a place where it can secure the trigger housing or the two sides of a handle. Screws can be used on their own or with a nut using a pre-drilled hole. If a nut is going to be used, it should have the same threading and finish as the screw.A screw can be damaged or broken and will need to be replaced. High temperatures, corrosion, and stress can cause the screw to break. Due to its small size, a screw may also be easily lost during other repairs. A visual inspection will provide information about whether the screw is broken, stripped, or lost. If any of these things are true, the screw should be removed using a screwdriver. A bolt remover can be used to replace the screw if it has become stripped.This screw is a genuine OEM replacement component that is directly sourced from the manufacturer. It is sold as a single screw. The screw is designed to be used with string trimmers, pole pruners, and leaf blowers manufactured by Paramount, Weed Eater, Craftsman, Poulan Pro, and Poulan.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Normally screws are found in many different types of appliances. These parts are important in holding different pieces together so that the user is able to operate the machine effectively. A new screw might be needed if some parts of the appliance are loose or missing from place.Screws can become stripped over time with normal equipment use. If this is the case it is recommended that they be replaced. The repair for this screw is simple and will most likely require common household tools as well as pliers. This screw is made of durable metal made for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.

This trimmer head is a genuine MTD part, sold individually. This trimmer head can be used as a replacement part for string trimmers. The purpose of a trimmer head is to provide a housing around which the string can coil and from which the string can dispense in order to chop through grass and greenery.The trimmer head might have to be replaced if it shows signs of damage. If the trimmer head is not properly dispensing string or if the trimmer head is not coiling or maintaining the coil of string as it usually does, a visual assessment of the component should be performed. If, upon assessment, there is damage that renders the component broken or malfunctioning, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This trimmer head is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, and Yard Man.

This hub is a genuine Husqvarna replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The hub is a crucial piece of a lawn trimmer that turns the string with enough force to cut through plant material. The hub contains the string that is unspooled when the engine is running and a cap with piercings through which the string is unspooled. A lawn trimmer hub might have to be replaced if an incompatible string is used on the lawn trimmer, such as a heavier string that cannot be properly spooled and unspooled by the hub. Additionally, a hub might have to be replaced from general overuse or long-term use. To remove and replace the hub, one will need a Phillips screwdriver, a flathead screwdriver, and an adjustable wrench. If the hub is damaged to the point that the lawn trimmer is unusable, the hub should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This hub is compatible with the following brands: Husqvarna, Poulan, and Weed Eater. This part sold individually.

This replacement part is a hex nut. This is a genuine replacement part made by Husqvarna. Hex nuts are small but important to the overall workings of different types of machinery. These parts work with other small pieces like screws and washers to ensure that all parts of the machine are in place and secure.A new hex nut might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of extended use or a single incident. It is not uncommon that hex nuts experience large amounts of friction over time and can become worn down after a while. Refer to the owner's manual for specific directions on how to replace this part.This hex nut is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part in string trimmers, edgers, chainsaws, and pole pruners.The screw in a small engine outdoor appliance might eventually have to be replaced in the case that the screw is lost, misplaced, or damaged from general wear and tear with long-term use. If the screw is lost or misplaced and its absence is noted by the operator, the screw should be replaced by this genuine OEM replacement part as soon as possible. If the screw is dented, cracked, punctured, or otherwise damaged, it should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.