Trimmer Plus Trimmer

This oil line is a genuine MTD part, sold individually. This oil line can be used as a replacement part in a pole saw. The purpose of the oil line in a pole saw is to provide a safe and guided passageway through which oil can channel into the appliance when the appliance is low on oil and requires additional fuel in order to continue its standard use.The oil line in a pole saw might be damaged at any point within its typical lifespan. If this damage occurs to the extent that the oil line is compromised and oil cannot be safely passed into the oil tank in order for the appliance to consume the oil at regular intervals, the oil line might have to be completely removed and replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil line is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, and Cub Cadet.

This gearbox assembly is a genuine MTD part, sold individually. This gearbox assembly can be used as a replacement part in a hedge trimmer or a chainsaw. The purpose of the gearbox assembly in a hedge trimmer or a chainsaw is to facilitate the driving of the appliance through a series of gears located within the infrastructure of the component. Replacement might be necessary if the gearbox assembly suffers damage in the form of puncturing, scraping, denting, cracking, warping, or eroding. If this occurs, the gearbox assembly should be removed and replaced by this genuine OEM replacement part before using the hedge trimmer or chainsaw again. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This gearbox assembly is compatible with the following outdoor appliance brands: MTD.

The part listed is an MTD upper boom assembly. An upper boom assembly is manufactured for installation on various brands of string trimmers. The boom assembly is made up of the upper and lower assemblies, respectively. The purpose of the upper boom assembly on a string trimmer is to help power the trimmer head. Essentially, the boom assembly acts as the driveshaft of the string trimmer. The boom assembly can also be unlocked and extended, allowing the string trimmer to reach further distances or heightened elevations. When the boom assembly becomes damaged, the string trimmer may not function as a working unit. There is a possibility the machine still powers but still has issues with the trimmer head. To install, remove the handle assembly of the string trimmer. There are several screws and an anti-rotation screw that make up this assembly. Remove the trigger and trigger springs, and pull the handle assembly away from the throttle cable. Remove the anti-rotation screw from the shaft of the trimmer and loosen the clamp. This should allow the shaft to be separated from the motor. Repeat these steps in reverse to install the new boom assembly.This product is a genuine OEM part sourced directly from MTD. This product is compatible with MTD, Troy Bilt, RoboMow, and Remington trimmers.

This replacement part is a cutting head assembly. This part is commonly found in grass trimmers or edgers and allows the user to precisely trim grass. A new cutting head assembly might be needed if the current one is no longer staying attached to the main frame of the grass trimmer. This can be from normal wear and tear over time or from an impact that may have caused damage. Be sure the appliance is completely powered down before attempting to replace this part. Work gloves are also recommended when working near any type of blade or sharp object.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This aeroflex cap is a genuine MTD part, sold individually. This aeroflex cap can be used as a replacement part in a string trimmer. The purpose of the aeroflex cap in a string trimmer is to provide a secure component to house the aeroflex cutting head for the trimmer, which automatically replenishes a used line during the operation of the trimmer.If the aeroflex cap is dented, cracked, punctured, eroded, warped, or otherwise damaged, it should be removed and replaced by this genuine OEM replacement part as soon as possible. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This aeroflex cap is compatible with the following outdoor appliance brands: MTD.

This brush cutter is a genuine MTD part, sold individually. This brush cutter can be used as a replacement part in a string trimmer. The purpose of the brush cutter in a string trimmer is to clear grass and other greenery with more power than the usual blades attached to a string trimmer.The brush cutter in a string trimmer might need to be replaced if the blades attached to the brush cutter can no longer chop through greenery with the same force or with the same functionality as at its peak performance. If the brushcutter has been punctured, dented, warped, or eroded to the point of reduced functionality, the brush cutter should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This brush cutter is compatible with the following outdoor appliance brands: MTD.

This deflector is a genuine MTD part. It is designed to be a replacement part on certain makes and models of string trimmers and handhelds.On string trimmers, the deflector protects the user while the trimmer is in use from flying debris. Because it frequently comes into contact with debris, it is very common for it to break or become damaged through routine use. It is an important safety feature so it must be replaced before it is used again.This deflector is a genuine OEM part sourced directly from the manufacturer. It is sold individually, though it does come with the hardware necessary to replace it. It is compatible with machines made by ClickLink, Craftsman, Cub Cadet, MTD, and Trimmer Plus.

This replacement part is a drive shaft housing and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This drive shaft housing is found in trimmers and edgers and is the main part that connects the user controls to the bottom part of the trimmer. This part is important as it allows the user to control the power and settings of the trimmer from a standing position. A new drive shaft housing might be needed if the current one is damaged. The long pole that connects the user controls and the blade is the most important part of the trimmer and if it is damaged, the entire appliance may be unable to be used. Be sure to wear work gloves especially if the old drive shaft is damaged. The user might need to handle the blade so be careful of injury. This is an OEM This part is sold individually.

This is a replacement string trimmer head that is used for a range of makes and models of trimmer. The head, sometimes called a cap, is placed on the bottom of the cutting head assembly. The glide cap is simple, but it serves an important function. It helps to keep the head from contacting the ground, so it is not damaged. The string trimmer head often comes into contact with the ground, roots, concrete, and other materials. Therefore, it can become damaged. It might crack or it could simply start to suffer from normal wear and tear after a lot of use. When this happens, owners should always replace the part sooner rather than later. If it is broken or not functioning properly, it could cause problems with the other elements in the trimmer. The replacement is simple and should not take users more than a few minutes to complete. The replacement string trimmer head is a genuine OEM part and it is sold individually. This part is for use only with string trimmers and is compatible with certain models from MTD and Cub Cadet.

This part is a replacement blower nozzle. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a broken, detached, or defective blower nzle on snow blowers.The blower nzle helps the operator to control the direction of the debris they wish to move. No special tools are required to attach this blower nzle, simply twist and lock into place. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this blower nzle, reference the owner's manual or equipment diagrams for specific instructions and part location.This is an authentic OEM part and as such is sold individually and made from durable and high-quality plastic. This blower nzle can be used with a variety of blower models manufactured by MTD, Craftsman, Yard Machines, Bolens, Cub Cadet, Husky, and Troy-Bilt.

This gearbox spacer is a genuine MTD part, sold individually. This gearbox spacer can be used as a replacement part in a string trimmer. The purpose of the gearbox spacer in a string trimmer is to serve as a fastening component within the infrastructure of the gearbox.The gearbox spacer might have to be replaced at some point within the typical lifespan of a string trimmer due to the fact that the spacer is a small component that can be easily lost or misplaced; the gearbox spacer could also be stripped over time from general wear and tear with long-term use, in which case the gearbox spacer should be removed and replaced by this genuine OEM replacement part. It is a simple replacement process that requires simply installing the new spacer in its previous position.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This gearbox spacer is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

The flexible lower drive shaft is for use specifically with select models of trimmers. The drive shaft is used to rotate the cutting head on the line trimmer. If the owner notices that their cutting head is not rotating properly, it could be due to an issue with the drive shaft. If it is not replaced, it could reduce the effectiveness of the trimmer.Although the flexible lower drive shaft is made from high-quality materials, owners might find a need to replace it. It could become damaged due to wear and tear, for example. Owners should be sure to wear gloves to keep their hands safe during the replacement.The trimmer flexible lower drive shaft can work with certain machines from Craftsman and MTD. This is a genuine OEM replacement part that has been sourced from the manufacturer. It is sold individually.

This cutting head holds the line that trims weeds and grass on several specific handheld gasoline trimmers. It is covered with a thick plastic cap that is bumped against the ground so that line can be released from the spool. The plastic bump head can endure an indefinite number of bumps against the ground. The cutting head not only experiences all the same bumps but also turns at 12,000 and must stop and start rapidly. As a result, after continual use, the cutting head sometimes requires replacement. There are several clues to suggest that a cutting head needs to be replaced. Most often, the bump function ceases to work or works sporadically. To replace the cutting head, press the slots in the bump housing to release the lower part of the housing. After removing the bump head, a ratchet is needed to remove the old head. Reverse the process to install the new cutting head. If a user must replace a cutting head, it is essential that it be replaced with a genuine OEM part made by Cub Cadet such as this one. This replacement cutting head is guaranteed to perfectly match the specifications of the original part it is replacing.

This lower boom assembly is a genuine MTD part, sold individually. This lower boom assembly can be used as a replacement part in a lawn mower or a lawn tractor. The purpose of the lower boom assembly in a lawn mower or a lawn tractor is to affix to the gearbox of the appliance.The lower boom assembly might need to be replaced at some point in the lifespan of a lawn mower or a lawn tractor. To facilitate the replacement, the operator must unscrew the screws within the upper and lower shaft, remove the malfunctioning or damaged boom assembly, separate the gearbox from the shaft, secure the gearbox to the new shaft, and then place the new boom assembly where the old boom assembly was. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This lower boom assembly is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, and Cub Cadet.