Parts for Troy-Bilt 41AS2BVG966: Tubes / Impeller / Handle Parts

This replacement part is an upper tube. This part is commonly found in leaf blowers and allows the user to direct leaves in the proper direction according to the airflow. The upper tube could be cracked, dented, or punctured by impact. Additionally, if the tube has been clogged and cannot be cleaned, it should also be replaced. Be sure the engine is completely turned off and cooled down before attempting to replace this part to prevent injuries. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This part is a replacement screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a stripped or misplaced screw in a variety of outdoor power equipment. This screw is a genuine piece of standard hardware that can have many potential uses. It's important to use screws sourced from the manufacturer to ensure a proper fit and high quality. Screws are essential for securing parts and holding the equipment together and should be replaced if worn, broken, or lost. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this screw is suitable for use on several different models of blowers, edgers, and trimmers manufactured by MTD, Ryobi, Yard Man, Cub Cadet, and Troy-Bilt. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement screw is useful for many different types of handheld outdoor equipment. Screws are used as a means to hold parts of the machine together. The screws also help to reduce the amount of vibration that occurs in the machine.These screws are used in outdoor equipment, so there is a chance they could corrode over time. In some cases, the screws may also lose their thread, or the heads of the screws could start to become worn down. Owners who notice issues with the screws, or who notice a missing screw should replace them to ensure the proper function of the machine. Failure to replace damaged screws could result in more difficulty replacing them after they wear down further.The screw works on various types of equipment including blowers and trimmers. It is compatible with a range of brands including Murray, Craftsman, Yard Machines, Bolens, Yard-Man, Craftsman, Ryobi, and McCulloch. This is a genuine OEM part sourced from the manufacturer, and it is sold individually.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This flat washer is a genuine MTD part, sold individually. This flat washer can be used as a replacement part in a leaf blower.The flat washer in a leaf blower might need to be replaced if the component is lost, misplaced, or damaged. The flat washer can loosen and fall off during the typical operation of a leaf blower, in which case it should be replaced with this genuine OEM replacement part. Additionally, the flat washer could suffer damage in the form of general wear and tear over time, in which case it should also be replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flat washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Man.

This impeller can be used as a replacement part for the small engine of a leaf blower or a leaf vacuum. The function of an impeller, which operates by rotation, is to take in the leaves and eject them out of the chute.An impeller might have to be replaced if it suffers damage that impedes it from properly ejecting the leaves from the chute. A common symptom of an impeller that needs to be replaced is that the leaves are not ejected with enough force from the chute or that the ejection process stalls or does not occur at all. If this is the case, the impeller should be removed and replaced with this genuine OEM replacement part immediately before using the leaf blower or leaf vacuum again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD, and it is sold individually. This impeller is compatible with the following brands: MTD, Troy-Bilt, and Yard Man.

The leaf blower starter adapter will work with many blower models. The part will connect the speed star accessory to start the engine. When the starter motor spins, it turns the shaft on the starter adapter. Inside the adapter, the shaft is connected to a coil spring. When the starter is spinning, the spring grabs the driveshaft and cranks the engine. If the starter adapter is not working properly, the engine may not start.The starter adapter is made of metal and is durable. However, it could become damaged from an accident, such as being dropped. There is also the chance that it could wear down or corrode over time. When it is not working correctly, owners will need to replace it. They should make sure to remove the spark plug before starting to work in the blower.This leaf blower starter adapter is compatible with some models from Troy-Bilt, Craftsman, Remington, MTD, and Yard-Man. It is sold individually and is an authentic OEM replacement part sourced from the manufacturer.

This is a grass catching bag designed to attach to several types of leaf blowers. Instead of blowing all of the leaves around the yard, it helps by accumulating the leaves so they can later be disposed of or turned into mulch for a garden. The bag attaches to the back of the leaf blower and can carry large amounts of leaves for someone who is doing yard work. Sometimes, using a grass catching bag for an extended period can lead to damage. If the grass bag ends up dragging against the ground or rubbing up against other things, it may develop a hole and will need to be replaced. The leaf blower should be off during this process to prevent injury. Find the area where the bag is mounted and unhook or unclamp it so it can be removed. Once it has been taken off, the replacement grass catching bag can be installed. Turn the blower back on and use the grass catcher bag as needed. This grass catching bag is a genuine OEM product designed for use with several leaf blowers by Craftsman, Yard-Man, Cub Cadet, and MTD. No additional tools are needed to install this component.