Parts for Ge AJT08DGV1: 01 - Section1 Parts

This main switch is the appliance's primary power control, providing a reliable on/off interface so the unit responds correctly when you start or stop it. It replaces a failed or worn switch to restore normal power control. What it does:

• Opens and closes the appliance's main electrical circuit to turn power on and off
• Restores user control when the appliance will not power up or respond to the control panel
• Helps eliminate intermittent power loss or unresponsive operation caused by a faulty switch
• Works with the unit's existing wiring and mounting locations for a direct replacement

• One main switch

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle wiring carefully and note terminal locations or take a photo before disconnecting
• Tighten terminal connections securely and check operation before reassembling the appliance

This air filter traps dust and lint before they reach the evaporator in your room air conditioner, helping maintain airflow and cooling performance. Replacing a damaged or missing filter protects the coil and keeps the unit running efficiently. What it does:

• Screens incoming air to help keep the evaporator coil clean
• Helps maintain proper airflow and cooling performance
• Replace if torn, warped, or excessively soiled
• Common symptoms: weak airflow, reduced cooling, or a filter that won't stay seated

• 1 air filter

• Disconnect power before opening the front panel
• Open the grille/access panel, remove the old filter, and note its orientation
• Slide the new filter fully into the track; ensure it sits flat and secure
• Do not operate the air conditioner without a filter; follow the owner's manual for care

This cover for the drip tray replaces a cracked or missing surface that directs condensate and defrost water into the drain channel, helping keep the cabinet floor dry and the drain path clear. What it does:

• Covers and channels condensate/defrost water toward the drain to prevent pooling under the tray
• Restores proper fit where the original cover is cracked, warped, or missing
• Helps reduce water leaks and standing moisture that can cause odors or floor damage
• Visible, inexpensive part often replaced when water is observed under the fridge or ice/water systems

• One cover, drip tray

• Disconnect power to the appliance before beginning any service
• Remove any access panels or shelves blocking the drip tray to reach the cover
• Inspect surrounding drain components for clogs or damage while replacing the cover
• Handle trimmed plastic edges carefully; hand-tighten fasteners to avoid cracking the new cover

This replacement barrier snaps into a refrigerator shelf or bin to help keep items from sliding forward and falling. It restores the shelf edge/retainer function so stored items stay organized and contained. What it does:

• Acts as a shelf/basket retainer to keep food and containers from shifting or falling
• Replaces broken, cracked or missing plastic shelf barriers that allow items to slide forward
• Helps maintain an organized shelf edge or deli/drawer area
• Fits into existing shelf/bin slots and holds items in place during door use or drawer movement

• One replacement barrier

• Remove food and any loose items from the shelf or bin before starting
• Align the barrier with the shelf/bin slots and press until it snaps or seats securely
• No special tools usually required; use a flat tool only if needed to help seat or remove the old piece

This base pan drain valve channels defrost and condensation water from the refrigerator base pan to the drain system, preventing standing water and ice buildup. It's a direct-replacement part that restores proper draining and helps maintain normal cooling performance. What it does:

• Directs melt and condensation from the base pan into the drain line to prevent pooling.
• Re-establishes proper water flow when a cracked, clogged, or broken drain outlet is causing leaks or puddles.
• Reduces odor and freeze-up risk by preventing stagnant water in the base pan.
• Works with the fridge's drain system; not an electrical component.

• Disconnect power to the appliance before starting any repair; also shut off water if the model has a connected water supply.
• Remove the kick plate/base cover and access the base pan to reach the drain valve.
• Inspect mating seals and the drain tube; replace degraded seals or clear any obstructions to ensure proper drainage.
• After installation, test by pouring a small amount of water into the base pan drain area and confirm it flows through the valve without leaking.

This mounting bracket secures internal appliance components to their chassis, restoring proper alignment and reducing movement. It's a simple replacement that helps stop rattles and keeps parts seated for reliable operation. What it does

• Provides a stable mounting point for internal panels or assemblies, preventing vibration and noise
• Restores proper alignment when a bent or broken bracket allows components to sag or shift
• Helps eliminate rattling or knocking sounds caused by loose or missing hardware
• Supports safe, secure attachment so other parts can function without strain

• One mounting bracket

• Disconnect power (and water, if applicable) before servicing to avoid shock or injury
• Basic hand tools (screwdriver, nut driver) are typically required; keep removed fasteners for re-use if undamaged
• Inspect surrounding parts and mounting points; replace any stripped screws or damaged anchors
• Tighten hardware securely but avoid over-torquing which can strip threads or crack plastic