Parts for Ge AJT10DGV1: 01 - Section1 Parts

Air conditioner not cooling or fan not spinning? This fan motor assembly restores airflow and cooling performance. Moderate DIY repair for most models.

This is a rotary-style main power switch that controls the on/off and mode selection functions of a room air conditioner. It connects to the unit's control panel and routes power to the compressor, fan, and other components based on the selected setting. Replace this switch if the air conditioner won't turn on, gets stuck on one setting, or the knob no longer clicks into position properly.

Traps dust and lint to maintain airflow and cooling performance in room air conditioners. Replace when damaged or missing to protect the evaporator coil.

Fix uneven cooling or freezing coils with this air conditioner capillary tube. Controls refrigerant flow between condenser and evaporator coils.

Secures louvers in your air conditioner. Replace if louvers are loose, rattling, or won't stay in position. Verify fit with your model number.

This cover for the drip tray replaces a cracked or missing surface that directs condensate and defrost water into the drain channel, helping keep the cabinet floor dry and the drain path clear. What it does:

• Covers and channels condensate/defrost water toward the drain to prevent pooling under the tray
• Restores proper fit where the original cover is cracked, warped, or missing
• Helps reduce water leaks and standing moisture that can cause odors or floor damage
• Visible, inexpensive part often replaced when water is observed under the fridge or ice/water systems

• One cover, drip tray

• Disconnect power to the appliance before beginning any service
• Remove any access panels or shelves blocking the drip tray to reach the cover
• Inspect surrounding drain components for clogs or damage while replacing the cover
• Handle trimmed plastic edges carefully; hand-tighten fasteners to avoid cracking the new cover

Fix excessive air conditioner vibration or noise with this compressor mounting grommet. Reduces operational sounds and stabilizes the compressor unit.

This replacement barrier snaps into a refrigerator shelf or bin to help keep items from sliding forward and falling. It restores the shelf edge/retainer function so stored items stay organized and contained. What it does:

• Acts as a shelf/basket retainer to keep food and containers from shifting or falling
• Replaces broken, cracked or missing plastic shelf barriers that allow items to slide forward
• Helps maintain an organized shelf edge or deli/drawer area
• Fits into existing shelf/bin slots and holds items in place during door use or drawer movement

• One replacement barrier

• Remove food and any loose items from the shelf or bin before starting
• Align the barrier with the shelf/bin slots and press until it snaps or seats securely
• No special tools usually required; use a flat tool only if needed to help seat or remove the old piece

This base pan drain valve channels defrost and condensation water from the refrigerator base pan to the drain system, preventing standing water and ice buildup. It's a direct-replacement part that restores proper draining and helps maintain normal cooling performance. What it does:

• Directs melt and condensation from the base pan into the drain line to prevent pooling.
• Re-establishes proper water flow when a cracked, clogged, or broken drain outlet is causing leaks or puddles.
• Reduces odor and freeze-up risk by preventing stagnant water in the base pan.
• Works with the fridge's drain system; not an electrical component.

• Disconnect power to the appliance before starting any repair; also shut off water if the model has a connected water supply.
• Remove the kick plate/base cover and access the base pan to reach the drain valve.
• Inspect mating seals and the drain tube; replace degraded seals or clear any obstructions to ensure proper drainage.
• After installation, test by pouring a small amount of water into the base pan drain area and confirm it flows through the valve without leaking.

This mounting bracket secures internal appliance components to their chassis, restoring proper alignment and reducing movement. It's a simple replacement that helps stop rattles and keeps parts seated for reliable operation. What it does

• Provides a stable mounting point for internal panels or assemblies, preventing vibration and noise
• Restores proper alignment when a bent or broken bracket allows components to sag or shift
• Helps eliminate rattling or knocking sounds caused by loose or missing hardware
• Supports safe, secure attachment so other parts can function without strain

• One mounting bracket

• Disconnect power (and water, if applicable) before servicing to avoid shock or injury
• Basic hand tools (screwdriver, nut driver) are typically required; keep removed fasteners for re-use if undamaged
• Inspect surrounding parts and mounting points; replace any stripped screws or damaged anchors
• Tighten hardware securely but avoid over-torquing which can strip threads or crack plastic