Parts for Dacor RGC304BNGH: Upper Assembly Parts

This Torx-head #6-32 replacement screw secures the refrigerator service pan and related trim pieces, restoring proper fit and preventing pan movement. Use it when a screw is missing, stripped, or corroded. What it does:

• Fastens the service pan or service-panel trim to the cabinet to keep parts aligned
• Prevents rattling or shifting that can occur from a missing or loose fastener
• Replaces stripped or corroded factory screws for a secure hold
• Works with standard Torx drivers for straightforward removal and installation

• Disconnect power to the appliance before starting any repair
• Remove the access panel or service pan per the manufacturer's instructions to reach screw locations
• Use the correct Torx driver to avoid cam-out or screw head damage
• Do not overtighten; snug until secure to avoid stripping threads or deforming plastic parts

This LED socket assembly restores the high-intensity indicator lighting used on select cooktops to show an active cooking zone. Replace a failed module to bring back clear, consistent illumination. What it does:

• Provides bright LED illumination for a cooking zone indicator
• Restores visual feedback that a burner/zone is in use
• Replaces a failed or damaged LED socket/module
• Common symptoms: no light, dim or flickering light, intermittent operation, or physical damage

• One LED socket assembly

• Disconnect power at the breaker before servicing
• Allow the appliance to cool and protect the glass surface while working
• Access the module from beneath the cooktop; match connector orientation and mounting position
• Test illumination before final reassembly

This service wire harness routes 110 VAC power between dryer components to restore electrical connections and enable normal operation. It replaces damaged or burnt wiring to help resolve power-related faults. What it does:

• Provides a factory-style 110 VAC wiring connection between control and internal components
• Restores broken, frayed, or heat-damaged wires that can cause intermittent power loss or no-power conditions
• Helps prevent arcing and poor connections that may trigger safety shutdowns or error codes
• Matches OEM connector types and routing for reliable fit and function

• One complete service wire harness as shown

• Disconnect power before servicing to avoid shock or injury
• Replace only with the specified harness; secure all connectors and routing clips per original layout
• Inspect nearby components for heat damage and replace if necessary

This blue indicator light restores the appliance's status illumination in the control area. Replace it if the original light is dim, flickering, or no longer illuminates so you can quickly see when a function is active.

• Provides a blue visual indication of operation/status on the control panel
• Helps at a glance when a feature is on
• Common fix for a light that won't turn on, is dim, flickers, or is physically damaged
• Direct-fit service part designed to connect to the original wiring and mounting points

• Disconnect power at the breaker or unplug the appliance before service
• Allow nearby surfaces and components to cool
• Access the indicator light from the control area; remove panels as needed
• Move connectors one at a time and route wiring as originally installed; test before reassembly

This right-side igniter insulation protects the oven igniter and surrounding wiring from heat and debris, helping maintain reliable ignition and prolong component life. Fits OEM-design ovens that use the matching insulation piece. What it does

• Shields the igniter and nearby wiring from high oven temperatures
• Helps prevent heat-related damage that can cause ignition issues
• Supports correct igniter positioning for consistent spark/ignition
• Common symptom: cracked, charred, or missing insulation causing intermittent ignition or burnt odors

• One right-side igniter insulation piece as shown

• Follow OEM service manual for safe removal and replacement procedures
• Disconnect power and gas supply (if applicable) before servicing
• Avoid damaging the igniter; handle insulation and wiring gently

This Torx-head #6-32 replacement screw secures the refrigerator service pan and related trim pieces, restoring proper fit and preventing pan movement. Use it when a screw is missing, stripped, or corroded. What it does:

• Fastens the service pan or service-panel trim to the cabinet to keep parts aligned
• Prevents rattling or shifting that can occur from a missing or loose fastener
• Replaces stripped or corroded factory screws for a secure hold
• Works with standard Torx drivers for straightforward removal and installation

• Disconnect power to the appliance before starting any repair
• Remove the access panel or service pan per the manufacturer's instructions to reach screw locations
• Use the correct Torx driver to avoid cam-out or screw head damage
• Do not overtighten; snug until secure to avoid stripping threads or deforming plastic parts

The Lawn Mower Washer No. 6 Type B is a crucial component for maintaining your Samsung walk-behind lawn mower. This genuine OEM part is designed to ensure a perfect fit and reliable performance, helping to keep your mower operating smoothly. Made specifically for Samsung models, the Washer No. 6 Type B provides essential support and stability, reducing vibrations and preventing unnecessary wear on other parts. Installing this washer is straightforward, allowing you to quickly restore your lawn mower's functionality without the need for professional assistance. By choosing the Lawn Mower Washer No. 6 Type B, you are investing in quality and durability, ensuring your equipment remains in excellent working condition for years to come. Enhance the efficiency and longevity of your walk-behind lawn mower with this dependable genuine OEM part, and enjoy a hassle-free mowing experience every time.

This LED isolator board supplies and protects the LED lighting/display circuitry on compatible Samsung appliances. It restores proper LED operation by isolating and regulating the LED power feed for reliable lighting and display performance. What it does:

• Routes and isolates power specifically for LED modules and display LEDs
• Helps stop LED flicker, dimming, or intermittent lighting caused by a failing isolator board
• Supports stable LED backlight and control signals to the appliance display
• Serves as a direct replacement for the original service board when the LED circuit is at fault

• One LED isolator/service board (DE81-06682A)

• Disconnect all power to the appliance before starting any repairs
• Handle the PCB by its edges and avoid static-sensitive contact with components
• Verify correct board orientation and connector seating during installation

This retaining ring secures the LED assembly in place, keeping indicator lights and display components stable for reliable operation. It's a small but important part that helps prevent loose or misaligned LED modules. What it does:

• Holds the LED assembly securely to the control/display area
• Prevents movement or rattling of indicator lights during operation
• Helps maintain proper alignment so LEDs remain visible and functional
• Can address symptoms like loose display trim, vibrating noises, or intermittently obscured LEDs

• Disconnect power before starting any repair to avoid shock or damage
• Handle the LED assembly and connectors gently to avoid breaking LEDs or wiring
• Use basic hand tools; avoid forcing the ring—align and snap into place per OEM guidance