Parts for Ge ZET2SH2SS: Upper Door Parts

This top pad channel secures and spaces the appliance's top or cooktop panel, helping keep surfaces aligned and reducing vibration. It replaces a worn or damaged channel to restore proper fit and panel stability. What it does

• Provides structural support and spacing for the appliance top or cooktop panel
• Helps prevent rubbing, rattling, or misalignment caused by a damaged channel
• Restores proper panel fit after wear, bending, or impact
• Works with existing fasteners and mounting points to hold the top in place

• One top pad channel

• Designed for direct replacement; verify orientation before removing the old channel
• Use appropriate tools to remove screws or clips holding the top; support the panel while working
• Disconnect power (and gas, if applicable) and follow safety precautions before servicing
• If fasteners are corroded or damaged, replace them with OEM-specified hardware

This bottom pad channel secures and supports the appliance pad/insulation and helps keep internal panels and trim aligned for quieter, more stable operation. It replaces a worn or damaged lower channel that can allow vibration or misalignment. What it does

• Provides a mounting channel for the lower appliance pad or insulation, holding it in place
• Helps keep panels and trim aligned to prevent gaps, rubbing, or rattling noises
• Restores proper seating of the pad to reduce vibration and movement during operation
• Used when the original channel is bent, cracked, missing, or corroded

• One bottom pad channel

• Disconnect power before starting any repair and work with the appliance powered off
• Access typically requires removal of lower access panels or trim; keep fasteners organized
• Inspect adjacent pads, clips, and mounting hardware and replace if damaged
• Follow model-specific service instructions for correct positioning and torque on fasteners

This lower door trim cover replaces a worn, cracked or missing bottom trim on the appliance door to restore appearance and protect the door edge from debris and further damage. Durable black finish matches original styling. What it does:

• Covers and protects the lower edge of the appliance door from dings, dirt and wear
• Restores a finished, uniform look when the original trim is scratched or broken
• Helps keep the door seal area free of debris that can affect closing
• Provides a direct cosmetic replacement where the original lower trim is damaged

• Disconnect power to the appliance before beginning any repair
• Installation typically requires removing the door trim screws or detaching the door; handle the door carefully to avoid damage
• Use proper tools and follow the appliance service manual for step-by-step instructions

The Oven door gasket is an OEM part for GE wall ovens and ranges. It fits around the inner rim of the oven door, creating an essential heat and air seal when closed. 

Symptoms of a bad door gasket include: 

• Excessive heat loss around the door when preheating or cooking  
• Ghosting or condensation buildup visible on the door glass
• Worn or misshapen gasket that no longer presses firmly against the door rim

Gasket material naturally hardens over time through repeated exposure to temperature changes. Accidental damage from cleaning can also impact the gasket's integrity. Replacing it with this genuine GE part helps maintain an efficient cooking environment. 

This OEM GE replacement gasket is also compatible with some Kenmore, Hotpoint, and RCA wall oven and range models. Proper sealing is important for energy efficiency as well as consistent cooking results.
 

This is the inner pad glass for the appliance door that restores the door's sealed inner surface and original appearance. Replacing a damaged inner glass helps maintain safe operation and a clean, finished look. What it does:

• Replaces cracked, chipped, or broken inner pad glass on the appliance door
• Restores the smooth inner surface that helps protect internal components
• Helps prevent heat/steam escape caused by damaged door glass
• Improves the door's appearance and makes cleaning easier

• One inner pad glass panel

• Disconnect power to the appliance before starting any repair
• Handle glass with care and wear cut-resistant gloves and eye protection
• Follow manufacturer disassembly steps — some models require removing the door and fasteners to access inner glass
• Only install OEM-matching glass to ensure proper fit and safety

A door handle spacer that fits behind a range of GE appliance handles to ensure correct fit and alignment, restoring a snug, finished appearance. Helps keep the handle positioned and prevents contact rubbing. What it does:

• Positions the door handle at the correct distance from the door surface for proper fit and operation
• Helps prevent handle wobble, rubbing, and cosmetic gaps
• Supports secure attachment of the handle to the door assembly
• Useful when replacing a damaged or missing spacer during handle repair

• One door handle spacer

• Install with the handle hardware in the correct order; confirm orientation before tightening
• Use proper-size screwdrivers; avoid over-tightening fasteners to prevent cracking the spacer
• Disconnect power or follow appliance-specific safety instructions when working near electrical components or heating elements
• Replace those components as well for a reliable repair

This deflector is the glass panel that directs heat and protects the interior of an over-the-range microwave door. Replacing a damaged or missing deflector helps restore proper shielding and appearance. What it does:

• Covers and protects the inner door area from heat and splatter
• Directs airflow and heat away from sensitive components behind the door
• Restores a sealed, finished look when original glass is cracked, chipped, or broken
• Helps reduce light and heat leakage through the door assembly

• One door glass deflector

• Disconnect power to the appliance before beginning any repair
• Handle glass with care; wear gloves and eye protection to avoid cuts
• Follow the appliance manufacturer's service manual for disassembly and reassembly steps
• If hardware appears damaged or missing, replace with OEM-specified fasteners

This left-side hinge support assembly secures and guides the refrigerator/freezer door, helping it open and close smoothly while keeping proper alignment. Fits as a replacement for worn or damaged left hinge supports. What it does

• Supports the door hinge shaft and maintains door alignment to prevent sagging or uneven closing
• Restores smooth opening/closing when the original hinge support is cracked, broken, or worn
• Helps stop door gaps that can cause poor temperature seal or increased energy use
• Works with existing hinge pins and mounting hardware when replacing a damaged support

• Disconnect power and empty the door before starting; support the door to prevent dropping
• Remove trim and hinge fasteners as needed to access the support; keep track of screws and spacers
• Reinstall in the original orientation and torque fasteners securely; test door swing and seal before returning to service

The inner oven door glass is the interior pane of the door assembly. Replacing a cracked or shattered panel restores a safe heat barrier and proper oven performance by preventing heat loss and protecting the cavity from broken glass.

• Forms the innermost heat barrier within the oven door's multi-pane design
• Helps retain heat and maintain stable cooking temperatures
• Replace if the glass is cracked, shattered, or missing
• Symptoms can include visible damage, heat escaping at the door, or rattling pieces inside the door

• Disconnect power; shut off gas and allow the oven to cool completely
• Remove the door per your service instructions and place it on a padded surface
• Wear cut-resistant gloves and eye protection; handle glass by the edges
• Reassemble in the original order and avoid overtightening screws against the glass; verify proper door closure

The Door Glass Inner Divider is an OEM component used in GE built-in oven doors. It sits securely between the outer and inner panes of heat-resistant glass.  

Causes of a bad divider can include cracks or damage developing from repeated heating cycles over time. Warping may also occur under constant exposure to extreme temperature changes.

Symptoms include:

• Condensation or fogging obscuring visibility into the oven
• Loose fit that compromises the pane seal integrity  
• Distorted or detached divider no longer spacing glass correctly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Black. 8-18 AB HXW 3/8

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

This is a replacement screw used to secure panels and components on compatible appliances. It provides a direct-fit fastening solution to restore proper part alignment and prevent rattling or loose panels. What it does

• Fastens appliance panels, brackets or assemblies where an 8-18 x 5/8 screw is specified
• Replaces missing or stripped fasteners that allow parts to shift or vibrate
• Restores secure mounting for components to reduce noise and movement
• Useful when a factory screw is damaged, corroded, or lost during service

• One screw

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct driver size and type to avoid stripping the head
• Install by hand first, then snug with a driver—do not over-torque
• Keep removed hardware organized to ensure correct reassembly