Parts for Frigidaire GCWD3067ADA: Upper Oven Parts

This replacement air fry tray lets your oven's air-fry function hold and crisp foods safely on the oven rack. It restores the manufacturer-intended tray used with Peregrine-series air fry ovens for even airflow and easy cleanup. What it does

• Holds food above the oven surface so hot air can circulate for air-frying and crisping.
• Designed to work with the oven's air-movement system to help promote even browning.
• Replaces a bent, warped, cracked, or missing air-fry tray that prevents proper use of the air-fry feature.
• Helps contain drips and crumbs for easier cleanup when roasting or air-frying.

• One air fry tray (Peregrine) as shown.

• Slide the tray onto the oven rack in the same orientation as the original; no tools usually required.
• Allow the oven to cool and disconnect power before removing the old tray or installing the new one.
• Inspect oven racks and supports for damage before use; do not use if warped or compromised.
• Hand wash or follow manufacturer care instructions; avoid abrasive cleaners that could damage the finish.

This upper dishwasher rack assembly replaces a worn or damaged top rack to restore secure dish placement and reliable sliding. It keeps cups, glasses and small items organized for better wash coverage and easier loading. What it does:

• Supports and secures dishes, cups and small items on the dishwasher's upper level
• Restores smooth sliding if rack sticks or binds on the rails
• Replaces bent tines or broken rack walls that fail to hold items
• Helps prevent dishes from shifting or tipping during the wash cycle

• Disconnect power and water supply to the appliance before servicing
• Remove any clips, rollers or rail stops as needed to slide out the old rack and install the new one
• Inspect and replace any worn rollers or rail guides if the rack does not track smoothly
• Handle carefully—metal edges and tines can be sharp

This flat wire oven rack sits on the interior supports to hold cookware at the correct height. Replace a bent, rusted, or missing rack to restore a stable, level surface for safe, even baking and roasting.

• Provides a level platform for pans, bakeware, and dishes inside the oven cavity
• Enables accurate shelf positioning to follow recipe and cooking instructions
• Replace if the rack is warped, rusted, has broken welds, or no longer sits level
• Symptom clues: cookware wobbles, tips, or cannot be positioned properly on the supports

• Disconnect power and allow the appliance to cool completely before handling interior parts
• Wear gloves; wire ends and edges can be sharp
• Match the rack orientation to the support ledges and seat it fully on both sides
• Confirm the rack is level and securely seated before loading cookware

This replacement switch restores reliable control of a selected function by opening or closing an electrical circuit inside your appliance. When the original switch wears out, buttons may stop responding or features may not activate consistently.

• Opens/closes an electrical circuit when the button/actuator is engaged
• Routes power or sends a signal to the control or component
• Common symptoms: no response when pressed, intermittent operation, or function won't start
• May show signs of heat damage, loose terminals, or inconsistent "click" feel

• Disconnect power at the breaker before servicing
• Photograph or label wire positions to ensure correct transfer to the new switch
• Move wires one at a time; fully seat connectors on the correct terminals
• Reassemble, restore power, and test the function activated by the switch

This lamp assembly replaces a damaged or nonworking interior refrigerator light to restore safe, reliable illumination. It includes the housing and lamp so you can see contents clearly and check temperatures at-a-glance. What it does

• Provides interior lighting so food and controls are visible when the door is opened
• Replaces cracked or yellowed lens/housing that scatters light or exposes wiring
• Restores a light that stays off due to a broken assembly
• Helps prevent food spoilage by making it easier to find items and verify temperatures

• One lamp assembly (housing with lamp)

• Disconnect power or unplug the appliance before beginning work
• Use basic hand tools; handle glass or lens pieces carefully to avoid breakage
• Check the door switch and wiring harness

This small replacement spacer positions and secures appliance components to maintain correct alignment and fit. Installing the spacer restores proper panel spacing and reduces vibration where a worn or missing spacer causes looseness or rubbing. What it does:

• Maintains the correct gap between panels, trim, or assemblies to ensure parts fit flush
• Keeps components aligned to prevent rubbing, binding, or uneven wear
• Helps reduce vibration and rattling caused by a missing or damaged spacer
• Preserves original part spacing for reliable operation of the surrounding components

• Disconnect power to the appliance before any service to avoid shock or injury
• Remove any trim or fasteners that block access; keep track of screws and small parts
• Match the new spacer's orientation to the original; do not force parts into place

This temperature probe senses oven cavity temperature and sends a signal to the range control so the oven can regulate heat. It helps restore accurate temperature readings for consistent baking and cooking results. What it does

• Senses oven temperature and relays readings to the control board
• Allows the control to cycle heating elements or gas valve for stable temps
• Commonly replaces a failed or intermittent sensor that causes incorrect oven temps
• Resolves symptoms like oven running too hot, too cool, or showing temperature error codes

• Disconnect power to the appliance before starting any repair to avoid shock.
• Handle the sensor and its wiring gently; avoid kinking or pulling on the lead.
• Route and secure the sensor lead the same way as the original to prevent contact with heating elements.

This cabinet/liner insulation pad helps reduce heat transfer and dampen vibration inside the refrigerator/freezer, supporting proper temperature performance and quiet operation. Replaces deteriorated or missing insulation to restore original thermal barriers. What it does:

• Provides a thermal barrier between the cabinet and liner to help maintain internal temperatures
• Helps reduce exterior cabinet condensation and frost buildup caused by missing or damaged insulation
• Dampens vibration and reduces noise coming from the appliance
• Restores gaps where insulation is compressed, torn, or missing

• One insulation pad

• Disconnect power and empty the appliance before starting work
• Remove interior panels or liners carefully; retain screws/clips for reassembly
• Position new insulation in the same orientation and avoid compressing or bunching it

This refrigerator door hinge secures and guides the door, restoring proper alignment and smooth opening. Replace a worn or damaged hinge to stop door sag, reduce rubbing or grinding, and help the door seal correctly. What it does:

• Supports the refrigerator door and keeps it aligned on the cabinet
• Guides door movement for smooth opening and closing
• Prevents door sag that can cause gaps and cooling loss
• Stops binding, scraping, or noisy operation caused by a damaged hinge

• Unplug the appliance or shut off power before starting any repair
• Support the door while removing and installing the hinge to prevent injury or damage
• Use the original fasteners or OEM-equivalent screws and tighten to proper snugness
• Check door alignment and gasket seal after installation; adjust hinge position as needed

This replacement evaporator fan blade helps circulate cold air inside the freezer or refrigerator compartment to maintain even temperatures and proper cooling performance. A direct-fit replacement when the existing blade is cracked, warped, or missing. What it does:

• Moves air across the evaporator to promote even cooling and frost prevention
• Restores proper airflow when a damaged blade causes noise or reduced cooling
• Helps reduce hot or warm spots inside the compartment
• Quiet, balanced operation when installed correctly

• One replacement evaporator fan blade

• Disconnect power to the appliance before starting any repair
• Typically accessed by removing interior panels in the freezer/refrigerator compartment
• Inspect the fan motor shaft and mounting for damage before installing the new blade

This is a replacement mounting nut used to secure components on compatible Frigidaire appliances. It provides a simple, reliable fastener to replace a missing, damaged, or corroded nut and restore proper part retention. What it does

• Secures panels, brackets, or hardware so parts stay in position during use
• Replaces stripped, rusted, or missing nuts that cause rattling or loose components
• Helps restore proper alignment and safe operation of the affected assembly
• Small fastener used wherever the OEM diagram specifies part 561231207

• One mounting nut (part number 561231207)

• Disconnect power or unplug the appliance before starting any repair
• Use the correct-size wrench or socket to avoid rounding the nut
• Tighten snugly but do not overtighten to prevent thread damage
• If the original nut was corroded, inspect mating threads and replace the bolt/stud if needed

This wiring harness supplies electrical connections between components, restoring power and signals for the affected circuit. It replaces a damaged or worn harness to help eliminate intermittent power or connection failures. What it does

• Carries power and signal between appliance components so controls and motors can operate
• Restores secure plug-and-socket connections when original wires or terminals are frayed or broken
• Helps address symptoms such as intermittent operation, blown fuses, or components not receiving power
• Matches OEM connector ends and wire routing to fit into the factory harness path

• Disconnect power (unplug appliance or shut off breaker) before beginning any repair
• Compare new harness to the old one to ensure connectors and wire lengths match before installation
• Route harness along the original path and secure with existing clips or ties to avoid heat and abrasion