Parts for GWT460AW: Washer Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This water valve absorption gasket is a replacement seal that fits between the water valve and surrounding housing to maintain a watertight connection and prevent leaks. It restores a secure seal for proper valve operation and leak control. What it does:

• Creates a watertight seal at the water valve mounting interface to stop drips and seepage.
• Helps maintain correct valve alignment and prevents moisture from reaching nearby components.
• Addresses symptoms such as visible leaking at the valve, water on the cabinet floor, or moisture buildup near the valve area.
• Supports reliable water flow by preventing external leaks that can affect valve performance.

• One water valve absorption gasket

• Disconnect power and shut off water supply before servicing; relieve pressure in lines.
• Inspect mating surfaces and clean away debris or old gasket material before installing the new gasket.
• Replace only with the exact gasket specified for the valve to ensure a proper fit; hand-fit then tighten mounting fasteners to OEM guidance.

This tub outlet clamp secures the tub outlet to the washer tub, keeping the seal and outlet assembly tight to help prevent leaks and maintain proper drain alignment. Durable spring-steel construction holds components in place during operation. What it does:

• Holds the tub outlet and gasket firmly to the washer tub to maintain a watertight seal
• Helps prevent water leaks at the tub outlet connection
• Keeps the outlet assembly aligned to reduce strain on hoses and fittings
• Supports reliable draining by maintaining a secure connection

• Disconnect power and turn off the water supply before starting any repair
• Inspect the outlet and gasket for damage; replace any worn seals when replacing the clamp
• Use pliers or a clamp tool to compress/install the spring clamp; ensure ends seat fully and evenly

This replacement door gasket creates a tight seal to help maintain appliance temperature and prevent air or moisture leaks for reliable operation. It restores sealing performance to reduce energy loss and keep contents at the correct temperature. What it does:

• Seals the door to prevent cold/hot air from leaking in or out
• Helps maintain consistent internal temperature and efficiency
• Reduces frost buildup and moisture migration that can affect performance
• Quietly restores a proper fit to stop drafts or uneven door closing

• Disconnect power to the appliance before beginning any work
• Remove the old gasket and clean the mounting surface thoroughly before installing
• Fit the gasket evenly around the door; follow OEM alignment and seating steps

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This genuine drive motor turns the dryer drum so clothes tumble for even drying and proper operation. Replaces a worn or failed motor to restore drum rotation and reduce unusual noises or a non-spinning drum. What it does:

• Powers drum rotation so loads tumble during the drying cycle
• Restores normal drum movement when a motor has failed or seized
• Can reduce grinding, squealing, or no-spin symptoms related to motor failure
• Works with the dryer's belt and idler system to maintain proper drum speed

• Disconnect power before service to prevent shock—this part requires electrical access
• Motor mounts to the dryer cabinet; some models require belt removal and limited disassembly
• Inspect the dryer belt, idler, and wiring for wear while replacing the motor

Washer not draining properly or leaking during drain cycle? This tub-to-pump drain hose carries water from the tub to the pump, restoring drainage.

Fixes kinked inlet hoses causing slow fills or leaks. This guide aligns and supports your washer's water hose connection to prevent strain and restore flow.

This replacement control knob lets you select heat settings and operate your range or oven controls with a secure, easy grip. Restores smooth turn action when the original knob is cracked, stripped, or missing. What it does

• Replaces a worn, broken, melted, or missing range/oven control knob to restore manual control
• Fits directly onto the stove/oven control shaft to select bake, broil, or burner settings
• Provides a positive grip and clear pointer for accurate setting selection
• Prevents slippage from damaged or stripped original knobs

• One control knob

• High-level push-on replacement; pull off the old knob and push the new knob fully onto the control shaft
• Match the knob to the control shaft shape and orientation before seating to avoid damage
• Disconnect power to the appliance before working near active controls or heating elements
• If knob does not seat or turn smoothly, stop and inspect the control shaft for damage — do not force

Washer won't fill properly or overfills? This water level pressure switch senses and signals correct fill levels, preventing overfill and underfill issues.

If clothes aren't agitating or cleaning properly, a worn pulsator may be the issue. This washer pulsator restores proper wash action. DIY-friendly fix.

This impeller mounting bolt and washer kit secures the washer/dryer or dishwasher pump impeller to the motor shaft, keeping the impeller aligned and preventing wobble or separation during operation. Designed for direct replacement to restore pump function. What it does:

• Fastens the pump impeller to the motor shaft so the impeller turns with the motor
• Prevents the impeller from loosening, reducing leaks, noise, and reduced water movement
• Helps restore normal pump performance when a worn or missing fastener allows slippage

• One impeller mounting bolt and matching washer

• Replace only when the pump is disassembled or impeller is being serviced
• Disconnect power and water before starting work to avoid shock or flooding
• Tighten to the manufacturer's specified torque if available; avoid over-tightening which can strip threads
• If other pump components show wear or damage, inspect and replace as needed for reliable operation

Fix a washer that won't fill with water or stops mid-cycle with a new water inlet valve. Controls water flow into the tub during wash cycles.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.