Parts for HLP24E: Washer Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This tapping screw is a self-tapping fastener used to secure panels and components on compatible appliances, restoring secure mounting and preventing loose or vibrating parts. It's a direct replacement for a single factory screw. What it does:

• Threads into sheet metal or plastic mounting points to hold panels, brackets, or small components
• Replaces missing or stripped screws that cause loose panels or rattling
• Helps restore proper alignment and secure connections for controls and covers
• Works where a self-tapping fastener is required instead of a machine screw

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid cam-out and head damage
• Start threading by hand to ensure proper engagement, then tighten until snug — do not over-torque
• Replace only with the exact part to ensure fit and proper fastening

This lid hinge clip secures the washer lid hinge to the cabinet so the lid opens and closes reliably. A small replacement part that restores proper lid alignment and keeps the hinge assembly held in place. What it does:

• Retains the lid hinge to the cabinet or hinge bracket so the lid stays attached and aligned
• Prevents the hinge from slipping or the lid from sagging or coming loose when opening/closing
• Helps eliminate catching, uneven lid movement, and related noise caused by a worn or broken clip
• Used as a direct replacement for the OEM hinge retainer on compatible top-load washer models

• One lid hinge clip (single)

• Disconnect power to the appliance before starting any work to avoid injury
• Access may require opening or removing the washer top and/or hinge cover—use common hand tools (screwdriver, pliers)
• Clip typically snaps or slides into place; keep original fasteners and re-use if undamaged

This water valve absorption gasket is a replacement seal that fits between the water valve and surrounding housing to maintain a watertight connection and prevent leaks. It restores a secure seal for proper valve operation and leak control. What it does:

• Creates a watertight seal at the water valve mounting interface to stop drips and seepage.
• Helps maintain correct valve alignment and prevents moisture from reaching nearby components.
• Addresses symptoms such as visible leaking at the valve, water on the cabinet floor, or moisture buildup near the valve area.
• Supports reliable water flow by preventing external leaks that can affect valve performance.

• One water valve absorption gasket

• Disconnect power and shut off water supply before servicing; relieve pressure in lines.
• Inspect mating surfaces and clean away debris or old gasket material before installing the new gasket.
• Replace only with the exact gasket specified for the valve to ensure a proper fit; hand-fit then tighten mounting fasteners to OEM guidance.

This rear foot is a replacement stabilizing leg that supports and levels the back of the appliance, restoring proper balance and reducing rocking or vibration for safe, even operation. What it does:

• Replaces a worn, cracked, or missing rear foot to restore stability
• Provides a firm mounting point at the appliance rear to prevent rocking
• Helps maintain correct appliance height and alignment for doors and seals
• Reduces vibration and noise caused by uneven flooring

• One rear foot

• Turn off power and disconnect the appliance before servicing
• Access the rear foot by tipping or raising the appliance per manufacturer instructions
• Thread or press the replacement foot into the mounting socket until secure; verify even leveling with the front feet

An adjustable leveling foot that stabilizes and levels ranges and other freestanding appliances for safe, even operation. Helps stop rocking and lets you fine-tune appliance height for proper door alignment and countertop fit. What it does:

• Replaces a worn or damaged leveling leg to restore a firm, level base
• Adjusts appliance height to correct uneven floors and prevent rocking
• Helps maintain proper door alignment and seal for ovens and ranges
• Protects flooring by providing a stable, load-bearing contact point

• Disconnect power and gas and follow appliance safety procedures before working underneath or tilting the unit
• Support the appliance securely or have a helper when raising it to access the foot
• Thread or slide the foot into the mounting bracket and adjust height until the appliance sits level
• Re-check stability and connections before returning the appliance to service

This replacement out-of-balance lever assembly restores the washer's ability to detect and respond to an uneven load, helping reduce excessive vibration and helping the machine complete normal spin and drain cycles. What it does:

• Transfers load/balance information to the washer's suspension/sensor system so the washer can rebalance during spin
• Helps reduce excessive shaking, banging or movement caused by an imbalanced load
• Prevents repeated automatic cycle interruptions or "out of balance" error conditions when functioning properly
• Contribute to noisy or failed spin cycles if worn, broken or disconnected

• One out of balance lever assembly

• Disconnect power to the washer before beginning any repairs
• Remove the appropriate access panels and note the lever orientation and linkages before removal
• Handle springs, clips and linkages carefully; keep fasteners and small parts organized for reassembly
• After installation, run a test/spin cycle and inspect for proper operation and reduced vibration; for specific alignment or calibration steps

This electronic control board replaces a failed or malfunctioning console control module to restore appliance control and cycle sequencing. It provides the logic and timed commands the appliance needs to run cycles correctly. What it does:

• Manages user inputs, cycle selection and timing for the appliance
• Sends power and signaling to motors, valves, and heaters per selected cycle
• Can prevent cycles from starting or cause erratic operation when faulty
• Common symptoms: unresponsive control panel, incorrect cycles, or intermittent power to components

• Disconnect all power to the appliance before starting any repair
• Handle the board carefully; avoid static discharge and damaged connectors
• Note connector locations and wiring orientation or take photos before removal

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This tub outlet clamp secures the tub outlet to the washer tub, keeping the seal and outlet assembly tight to help prevent leaks and maintain proper drain alignment. Durable spring-steel construction holds components in place during operation. What it does:

• Holds the tub outlet and gasket firmly to the washer tub to maintain a watertight seal
• Helps prevent water leaks at the tub outlet connection
• Keeps the outlet assembly aligned to reduce strain on hoses and fittings
• Supports reliable draining by maintaining a secure connection

• Disconnect power and turn off the water supply before starting any repair
• Inspect the outlet and gasket for damage; replace any worn seals when replacing the clamp
• Use pliers or a clamp tool to compress/install the spring clamp; ensure ends seat fully and evenly

This screw secures the power cord/strain relief to the appliance chassis, keeping the cord anchored and reducing stress on the wire connection. Replaces a lost or damaged mounting screw to restore a secure cord attachment. What it does:

• Fastens the power cord strain relief to the appliance cabinet to prevent cord movement
• Helps stop the cord from pulling on internal electrical connections that can cause arcing or intermittent power
• Restores a tight, stable attachment when the original screw is corroded, stripped, or missing

• Always disconnect power at the breaker or unplug the appliance before servicing
• Verify the strain relief is correctly seated around the cord before tightening the screw
• Hand-start the screw to avoid cross-threading; tighten until secure but do not over-torque (over-tightening can crack plastic or strip threads)

This impeller mounting bolt and washer kit secures the washer/dryer or dishwasher pump impeller to the motor shaft, keeping the impeller aligned and preventing wobble or separation during operation. Designed for direct replacement to restore pump function. What it does:

• Fastens the pump impeller to the motor shaft so the impeller turns with the motor
• Prevents the impeller from loosening, reducing leaks, noise, and reduced water movement
• Helps restore normal pump performance when a worn or missing fastener allows slippage

• One impeller mounting bolt and matching washer

• Replace only when the pump is disassembled or impeller is being serviced
• Disconnect power and water before starting work to avoid shock or flooding
• Tighten to the manufacturer's specified torque if available; avoid over-tightening which can strip threads
• If other pump components show wear or damage, inspect and replace as needed for reliable operation

Replacement spring for the washer's out-of-balance switch lever. It restores proper lever tension so the switch can correctly sense unbalanced loads and manage the spin cycle, helping reduce vibration, noise, and nuisance stops. What it does:

• Maintains the return tension on the out-of-balance switch lever so the switch actuates reliably during spin
• Allows the control to pause or redistribute when a load is unbalanced, minimizing vibration and banging
• A weak, stretched, or missing spring can cause no-spin, repeated pauses, or cycles that end early with out-of-balance warnings
• Helps ensure accurate imbalance detection for consistent spin performance

• Includes 1 spring

• Unplug the washer before servicing
• Access the out-of-balance switch lever (location varies by model; often under the top or behind the front panel)
• Note the spring's routing and attachment points; install the new spring in the same orientation and avoid overstretching
• After reassembly, run a short spin test with a small load to confirm operation

Replacement lint filter that fits the dryer's lint trap to capture fibers and debris, helping keep the vent clear and maintain drying performance. Easy to remove for cleaning and periodic replacement. What it does:

• Captures lint and fabric fibers before they enter the vent system.
• Helps maintain efficient drying by preventing lint buildup in the airflow path.
• Can reduce lint-related odors and the risk of restricted airflow when used and cleaned regularly.
• Replace when the screen is torn, warped, missing, or no longer traps lint effectively.

• Disconnect power to the dryer before inspecting or servicing the lint trap area.
• Slide the filter into the lint trap housing until fully seated; no special tools typically required.
• Clean the lint trap housing and surrounding area before installing the new filter.
• Do not operate the dryer without a lint filter in place.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.