Parts for Weedeater GBI20: Weed Eater Assembly Parts

Choke spacer for grass line trimmers and other outdoor power equipment. Replaces cracked, broken, or missing spacers in the carburetor choke assembly.

Wave washer for lawn and garden equipment. Replace when worn or damaged to maintain proper tension and spacing. Verify fit with your model number.

Carburetor assembly kit mixes air and fuel for your chainsaw, trimmer, or blower engine. Replace when engine runs rough, stalls, or won't start. Verify fit with your model number.

Carburetor assembly kit mixes air and fuel for your chainsaw, trimmer, or blower engine. Replace when engine runs rough, stalls, or won't start. Verify fit with your model number.

Seals the carburetor to prevent debris contamination in your trimmer or blower. Replace if you notice fuel leaks or engine performance issues.

Assembly screw for grass line trimmers, leaf blowers, and pruners. Secures internal components and housing panels. Replace if stripped, missing, or damaged.

If your trimmer won't start or runs rough, a damaged reed valve may be blocking proper fuel-air flow. This inlet valve ensures one-way crankcase flow.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

Replacement mounting screw for grass trimmers, hedge trimmers, blowers, and pruners. Secures housings and covers. Replace if stripped, missing, or damaged.

Engine won't start or has weak power? A sheared flywheel key disrupts timing. This small metal key aligns the flywheel to the crankshaft. Easy 15-minute fix.

Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.

The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.

Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.

Symptoms of a bad Fuel Line include:

• The engine failing to start or running inconsistently
• Visible cracks or leaks in the fuel line
• Fuel odor or visible fuel leaks around the equipment
• Reduced engine performance or stalling during operation

This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.

Seals the fuel tank with an airtight fit to prevent spills during operation. Replace if cracked, loose, or leaking. Verify fit with your model number.

Replacement housing screw for grass line trimmers and leaf blowers. Secures outer covers and components. Needed when original screws are stripped or lost.

Cylinder gasket with adhesive for grass line trimmers, hedge trimmers, and leaf blowers. Replace when worn or damaged to prevent air leaks and maintain engine compression. Verify fit with your model number before ordering.

Fix a loose or rattling piston with this wrist pin retainer. Secures the piston pin in trimmers, blowers, and hedge trimmers. Basic hand tools needed.

Tapping screw for outdoor power equipment engines. Replaces missing, stripped, or damaged mounting screws. Consult your parts diagram for location.

This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer or a leaf blower. The purpose of the retainer in a string trimmer or a leaf blower is to secure the recoil starter pulley while the appliance is in use. The retainer in a string trimmer or a leaf blower might have to be replaced if it can no longer secure the recoil starter pulley. If damaged, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Weed Eater, Paramount, and Turf King.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

Engine won't start or rope pulls out completely? This starter rope kit wraps around the recoil pulley to engage the engine. Simple DIY fix, 3 feet long.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

Metering diaphragm gasket for grass trimmers. Replace if you notice fuel leaks, hard starting, or poor performance. Verify fit with your model number.

Engine won't start or runs poorly? A worn fuel pump diaphragm allows air into the fuel system. This seal is critical for proper fuel delivery.

Fix engine starting issues or rough idling with this carburetor metering lever spring. Restores proper fuel flow in chainsaws and trimmers. Simple repair.

Carburetor repair kit for grass line trimmers. Replace when experiencing hard starting, rough idle, or poor performance. Verify fit with your model number.

Carburetor gasket kit for chainsaws, trimmers, blowers, and edgers. Replace when experiencing fuel leaks or poor engine performance. Verify fit.

Replacement needle adjustment cap for grass trimmers. Installs on carburetor to control fuel mixture. Replace if cracked, broken, stripped, or lost.