Parts for Weedeater BARRACUDA SV22: Weed Eater Parts

Return spring for grass line trimmer throttle lever assembly. Restores proper lever operation when original spring is broken, stretched, or missing.

This authentic OEM replacement on/off switch is a safety measure that manufacturers install to prevent the chainsaw or trimmer from starting before the operator is ready. It also allows the operator to stop their appliance at a moment's notice if they lose control of it. The on/off switch is located in or near the handle of the appliance and must be in the on position for the appliance to start. If hit to the off position, the appliance will immediately stop running. Switches can slowly wear out over time due to repeated use. When it wears out, the switch will no longer give the same amount of resistance and may be tripped more easily. This can be frustrating as it means that the operator would have to continually restart their appliance. To replace the switch, use a screwdriver to access the handle interior and detach the wiring from the old switch. Install the new part and reassemble. This switch is a high-quality replacement part for Craftsman chainsaws and trimmers, and as such, it comes sourced directly from the original manufacturer. This part ships individually.

Seals the fuel tank with an airtight fit to prevent spills during operation. Replace if cracked, loose, or leaking. Verify fit with your model number.

Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.

Replacement housing screw for grass line trimmers and leaf blowers. Secures outer covers and components. Needed when original screws are stripped or lost.

Cylinder gasket with adhesive for grass line trimmers, hedge trimmers, and leaf blowers. Replace when worn or damaged to prevent air leaks and maintain engine compression. Verify fit with your model number before ordering.

Fix a loose or rattling piston with this wrist pin retainer. Secures the piston pin in trimmers, blowers, and hedge trimmers. Basic hand tools needed.

This is a genuine carburetor screw that is designed to replace missing or broken screws in certain lawn and garden equipment engines. On select models of small engines, there are two carburetor screws that are used to secure the carburetor to the rest of the engine assembly. These screws are made of durable material, but also constantly exposed to high heat and constant vibrations. They may become worn, damaged, or even snap off entirely as a result. They sometimes also get lost in the process of other repairs and will need to be replaced. This genuine OEM part will offer the solution for compatible engines. This OEM carburetor screw is compatible with hedge trimmers, edger/trimmer models, and blowers that use the appropriate engine. There are over 150 models that take this carburetor screw, including those from Husqvarna, Paramount, Weed Eater, Jonsered, and Poulan. This durable screw is sold as a single unit and features a hex socket head, so be sure to have the proper tool for installation. Those who need to replace both screws will have to purchase two separately. Be sure to allow the engine to cool completely and wear gloves whenever replacing screws or performing other engine repairs.

Wave washer for lawn and garden equipment. Replace when worn or damaged to maintain proper tension and spacing. Verify fit with your model number.

Choke spacer for grass line trimmers and other outdoor power equipment. Replaces cracked, broken, or missing spacers in the carburetor choke assembly.

Replacement mounting screw for grass trimmers, hedge trimmers, blowers, and pruners. Secures housings and covers. Replace if stripped, missing, or damaged.

Carburetor assembly kit mixes air and fuel for your chainsaw, trimmer, or blower engine. Replace when engine runs rough, stalls, or won't start. Verify fit with your model number.

Seals the carburetor to prevent debris contamination in your trimmer or blower. Replace if you notice fuel leaks or engine performance issues.

Foam seal for leaf blowers that prevents air leaks in engine compartment. Replace when worn, cracked, or damaged to maintain proper performance. Verify fit.

Tapping screw for outdoor power equipment engines. Replaces missing, stripped, or damaged mounting screws. Consult your parts diagram for location.

If your trimmer won't start or runs rough, a damaged reed valve may be blocking proper fuel-air flow. This inlet valve ensures one-way crankcase flow.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This replacement part is a crankshaft assembly. This is a genuine replacement part made by Husqvarna. This specific part is an extremely important part of the engine in many machines. The crankshaft assembly is responsible for converting linear motion to a rotational motion.A new crankshaft assembly might be needed if the engine is running, but the proper operations are not being performed. This can be due to the fact that the crankshaft is no longer converting energy properly and should be replaced as soon as possible. Be sure the engine is completely shut down before attempting to replace this part. Work gloves are also recommended during this repair. This crankshaft assembly is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

Engine won't start or rope pulls out completely? This starter rope kit wraps around the recoil pulley to engage the engine. Simple DIY fix, 3 feet long.

This is a carburetor rebuilt kit made for use with gas powered chainsaws. It comes with many parts, including gaskets and diaphragms, that can get a chainsaw running properly again if there are issues with the carburetor. The carburetor is an important component of the chainsaw that ensures the right amount of gas and air reach the cylinder to ignite. The main symptom of carburetor issues is an engine that won't start even when the tank is full of fuel.There's a simple test to determine if the carburetor has an issue inside the chainsaw. The air filter will need to be removed from the equipment before a small amount of fuel is added directly to the carburetor. If the carburetor has problems, the engine will start for a short time before shutting off. Replacing or repairing the carburetor will be required.This carburetor rebuild kit is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit with several components. The kit is made for use with chainsaws manufactured by Zama and Stihl.

Replacement mounting screw for brush cutters, chainsaws, trimmers, and blowers. Replaces lost, stripped, or broken screws during repairs or maintenance.

This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer or a leaf blower. The purpose of the retainer in a string trimmer or a leaf blower is to secure the recoil starter pulley while the appliance is in use. The retainer in a string trimmer or a leaf blower might have to be replaced if it can no longer secure the recoil starter pulley. If damaged, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Weed Eater, Paramount, and Turf King.

Fix a leaf blower that won't start or has a stuck pull cord with this recoil starter pulley. Essential component of the pull-start mechanism.

This starter spring will put tension on the starter pulley, which will then retract the starter assembly on a range of lawn and garden equipment. It engages the drive cup on the flywheel to start the engine when it is pulled. The starter spring is made from durable metal, but it may need to be replaced if it fails. It could become damaged or corroded, or it may have simply worn down over time and a lot of usage. A problematic starter spring will mean that the starter cord does not recoil properly after being pulled. It can make starting the engine difficult at best, and impossible at worst. In these cases, a replacement becomes necessary. The authentic OEM replacement starter spring is sold individually. It can be used with string trimmers, leaf blowers, and hedge trimmers. It is compatible with Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater brands. Buyers must always make sure they are choosing the correct option for their make and model.

The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.

Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.

Symptoms of a bad Fuel Line include:

• The engine failing to start or running inconsistently
• Visible cracks or leaks in the fuel line
• Fuel odor or visible fuel leaks around the equipment
• Reduced engine performance or stalling during operation

This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.