Weedeater Leaf Blower Parts

Carburetor adapter for gas line trimmers and leaf blowers. Connects the carburetor to the engine intake. Replace if cracked, broken, or deteriorated.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

Replace the throttle handle kit on your gas leaf blower. Needed when the handle assembly is cracked, broken, or worn from use. Includes components for secure installation.

Carburetor for gas-powered leaf blower engines. Controls air-fuel mixture for proper combustion. Replace if worn, clogged, or causing poor performance.

Replacement carburetor assembly for leaf blowers. Installs in the engine compartment to mix air and fuel. Order when your original is cracked or worn.

Carburetor for gas-powered leaf blowers. Mixes air and fuel for the engine. Replace if cracked, clogged, or damaged to restore proper fuel delivery.

Complete piston kit for gas leaf blower engines. Includes piston, ring, needle bearing, and connecting rod. Replace when cracked, scored, or worn.

This replacement part is a carburetor assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This carburetor assembly is used in leaf blowers and snow blowers and is part of the engine. This part is one of the most important parts of the machine and is responsible for allowing it to run smoothly.A new carburetor assembly might be needed if the current engine is slow to start, slow to stop, or won't start at all. This can be due to a malfunctioning carburetor and create problems within the machine. Be sure the appliance is completely powered down before replacing this part. work gloves are recommended to ensure safety during any type of repair.This carburetor is sold individually and is a genuine OEM replacement part. This is also sourced directly from the manufacturer.

Protects your trimmer engine from dirt and debris. Replace when clogged or dirty to prevent unusual engine sounds and maintain proper performance.

Lower tube for leaf blowers. Attaches to the upper tube to direct airflow. Replace if cracked, broken, or missing for proper air projection distance.

Replacement throttle linkage that connects the throttle control to the carburetor on gas leaf blowers. Order a new linkage if yours is bent or broken.

This part is a high speed restrictor nzle that is used on blowers. The restrictor style of nzle concentrates the air stream for increased power by acting as a funnel. This nzle is twisted onto the lower blower tube. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Use caution when working with any outdoor power equipment.A new high speed restrictor nzle may be needed if the original is cracked, broken, or damaged in any way. If the nzle will not turn to lock into the lower blower tube, both parts should be inspected to determine which component needs to be replaced. This high speed restrictor nzle is a genuine Husqvarna part. It is sold individually. This specific high speed restrictor nzle is compatible with blowers that are manufactured by Craftsman, Husqvarna, Poulan, McCulloch, and Weed Eater.

This part is a replacement recoil starter rope. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, snapped, or defective recoil starter rope in a variety of leaf blower models. This recoil starter rope wraps around the recoil starter pulley to supply power to the leaf blower. The rope may snap or become frayed and worn over time, and thus will require replacement. When working on or near any engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this recoil starter rope, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this recoil starter rope is suitable for use on several different models of leaf blowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

Replacement carburetor assembly for handheld leaf blowers. Mixes air and fuel for engine operation. Install if original is cracked or clogged.

Gasket kit seals surfaces to prevent leaks and friction in leaf blowers. Replace if gaskets are loose, damaged, or causing performance issues. Verify fit with your model number before ordering.

Carburetor adapter spacer for leaf blowers. Installs between carburetor and intake manifold. Replace if cracked, damaged, or causing air leaks.